• Bulletin of the Korean Chemical Society
• /
• 제4권4호
• /
• pp.162-169
• /
• 1983

The swelling and stress-elongation experiments have been performed for two kinds of gels of tactic poly (2-hydroxyethyl methacrylate) (P-HEMA) with varying crosslinker concentrations. The gels of isotactic and syndiotactic P-HEMA were swollen in aqueous salt solutions upon varying molal concentrations. The solute used were NaCl, $MgCl_2$, $Na_2SO_4$, $MgSO_4$ and urea. The water content at equilibrium swelling and the salt partition coefficient were determined, and stress-elongation curves of the gels were obtained. From these results, the effective number of chain (${\nu}_e$) and the Flory-Huggins interaction parameter (${\chi}_1$) were also obtained. The swelling experiment was also performed under varying solvents, and the degree of swelling was determined. The solubility parameter of P-HEMA was obtained as 13.4 (cal/mole)$^{l/2}$ using the correlation between the degree of swelling and the solubility parameter (${\delta}_1$) of solvents. The mechanical properties of syndiotactic P-HEMA is stronger than that of isotactic P-HEMA, and the water content of both gels become smaller when the crosslinking increases. Isotactic P-HEMA contains more water content than syndiotactic P-HEMA does.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2003년도 춘계학술발표회 논문집
• /
• pp.135-138
• /
• 2003

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1995년도 추계 학술발표회
• /
• pp.124-125
• /
• 1995

• Macromolecular Research
• /
• 제15권6호
• /
• pp.491-497
• /
• 2007

NPT Monte Carlo simulations were performed to calculate the molecular properties of syndiotactic poly(vinyl chloride) (PVC) and syndiotactic poly(vinyl alcohol) (PVA) melts using the configurational bias Monte Carlo move, concerted rotation, reptation, and volume fluctuation. The density, mean square backbone end-to-end distance, mean square radius of gyration, fractional free-volume distribution, distribution of torsional angles, small molecule solubility constant, and radial distribution function of PVC at 0.1 MPa and above the glass transition temperature were calculated/measured, and those of PVA were calculated. The calculated results were compared with the corresponding experimental data and discussed. The calculated densities of PVC and PVA were smaller than the experimental values, probably due to the very low molecular weight of the model polymer used in the simulation. The fractional free-volume distribution and radial distribution function for PVC and PVA were nearly independent of temperature.

• Bulletin of the Korean Chemical Society
• /
• 제25권11호
• /
• pp.1648-1652
• /
• 2004

A set of unprecedented syndiospecific dimethyl- and diethylamino-functionalized polystyrenes was prepared by catalytically polymerizing the corresponding monomers using (pentamethylcyclopentadienyl)titanatrane/MMAO catalytic system. Dialkylamino-functionalized styrene monomers were synthesized by Wittig reaction from the corresponding aldehyde in high yield. The resulting polymers are soluble in polar organic solvents such as THF and show good thermal stability. The chemical transformation of the syndiospecific poly(4-diethylaminostyrene) also gave new polar polymers, namely syndiotactic poly(4-diethylaminostyrene hydrochloride), which is unattainable by traditional synthetic methods.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1996년도 추계 학술발표회
• /
• pp.185-189
• /
• 1996

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2000년도 봄 한국섬유공학회 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.249-252
• /
• 2000

• 한국산학기술학회논문지
• /
• 제11권4호
• /
• pp.1348-1353
• /
• 2010

신디오탁틱 폴리스타이렌의 벌크 중합 시, 반응의 초기단계에서 균일하던 반응혼합물은 반응이 진행됨에 따라 점차 침전된 고형 sPS와 액체 반응생성물로 형성된 슬러리 상태로 변해간다. 반응이 더 진행되면 고형 침전물의 양이 많아지고 반응물이 엉겨 붙는 현상을 적절한 방법으로 해소하면 슬러리 상태에서 젖은 분말 형태 더 나가서는 마른 분말 형태의 반응 생성물을 얻게 된다. 전화율을 높이기 위해 촉매와 조촉매의 양을 늘리는 경우 반응성생물은 어느 순간 한 덩어리가 되어 더 이상의 반응 제어가 불가능해진다. 이 연구에서는 이렇게 덩어리로 응집되는 현상을 막고 고 전화율의 반응이 가능하도록 특별한 방법을 사용하였다. 촉매와 조촉매를 한 번에 투입하지 않고 여러 단계로 나누어 투입하는 경우 반응물의 응집을 막고 전화율을 높게 유지할 수 있었다. 또한 이 방법은 sPS의 분자량을 높이는데도 도움이 되는 것을 알 수 있었다.

• 폴리머
• /
• 제37권5호
• /
• pp.563-570
• /
• 2013

폴리비닐알코올(poly(vinyl alcohol), PVA) 마이크로피브릴(microfibrils)을 금속 색전코일을 대체할 수 있는 고분자 색전코일에 적용하기 위해 벌크중합으로 폴리피발산비닐(poly(vinyl pivalate), PVPi)을 제조하고 비누화 공정에서 방사공정 없이 중합도가 1100 교대배열 다이애드(diad)기 함량 60.4%인 교대배열 PVA(syndiotactic PVA, s-PVA) 마이크로피브릴을 제조하였다. 또한 별도의 조영제의 투여가 불필요한 마이크로피브릴 제조를 위해 방사선불투과성 물질인 이산화지르코늄과 황산바륨을 비누화 공정에서 첨가하여 방사성불투과성 교대배열 PVA 마이크로피브릴을 제조하였고, 무기입자 함유 s-PVA 마이크로피브릴의 computed tomography(CT) value 값 측정 결과 이산화지르코늄의 함량이 12 wt% 이상에서, 황산바륨은 6 wt% 이상에서 1000 이상의 우수한 방사선불투과성을 나타내는 것을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제2권2호
• /
• pp.60-66
• /
• 1981

The hypothesis that three classes of water exist in hydrogels, namely X water (free water-like), Z-water (bound water-like), and Y water (interfacial water-like), has been verified and generally accepted. To further check the validity of this hypothesis and to study the nature of X, Y, and Z water as conformation changes, several experiments have been done using Tactic Poly(2-hydroxyethyl methacrylate) (P-HEMA) gels. Thermal expansively data for tactic P-HEMA gel was obtained. In each case of isotactic and syndiotactic P-HEMA, the higher water content gels showed an extremely sharp volume change at $0^{\circ}C$, indicating the presence of normal free water-like. Lower water content gels showed no anomalous change in thermal expansion, indicating that the water is bound water-like. The medium water content gels exhibited intermediate behavior. These results were also confirmed by bulk gel conductivity measurments. The differential scanning calorimeter(DSC) experiment was simply introduced to further verify the bound water-like quantities which was obtained by the method of dilatometry and specific conductivity. Observing the amounts of X, Y, and Z water with the change of tacticity, the similar content of bound water-like may be due to the same primary structure of isotactic and syndiotactic polymer and the difference in free and interfacial water-like content may be due to the difference in secondary and tertiary structure of tactic polymer. Therefore, as the polymer conformation varies, the free and interfacial water-like content will be varied. In order to demonstrate these concepts, Russel et al.'s CPK space-filling molecular models of isotactic and syndiotactic P-HEMA was utilized.