• Title/Summary/Keyword: synchronization likelihood

Search Result 18, Processing Time 0.018 seconds

Multi-Antenna Noncoherent ML Synchronization for UWB-IR Faded Channels

  • Baccarelli Enzo;Biagi Mauro;Pelizzoni Cristian;Cordeschi Nicola
    • Journal of Communications and Networks
    • /
    • v.8 no.2
    • /
    • pp.194-204
    • /
    • 2006
  • This contribution focuses on the maximum likelihood (ML) noncoherent synchronization of multi-antenna transceivers working in faded environments and employing ultra-wideband impulse radio (UWB-IR) transmit technology. In particular, the Cramer-Rao bound (CRB) is derived for the general case of multiple input multiple output (MIMO) UWB-IR systems and used to compare the ultimate performance of three basic transmit schemes, thereinafter referred to as single input multiple output (SIMO), MIMO equal signaling (MIMO-ES), and MIMO orthogonal signaling (MIMO-OS) ones. Thus, the noncoherent ML synchronizer is developed for the better performing transmit scheme (i.e., the SIMO one) and its performance is evaluated under both signal acquisition and tracking operating conditions. The performance gain in the synchronization of UWB- IR signals arising by the utilization of the multi-antenna technology is also evaluated.

Joint synchronization and parameter estimation in OFDM signaling

  • Sara Karami;Hossein Bahramgiri
    • ETRI Journal
    • /
    • v.45 no.2
    • /
    • pp.226-239
    • /
    • 2023
  • Challenges in cognitive radio and tactical communications include recognizing anonymously received signals and estimating parameters in a blind or semi-blind manner. In this paper, we examine this issue for orthogonal frequency division multiplexing (OFDM) signaling. There are several parameters in OFDM signaling, and the blind receiver must extract and consider the synchronization issue. We assume that the blind receiver is aware of modulation type, OFDM, and not aware of chip duration and the length of cyclic prefix. First, we present new criteria based on kurtosis to estimate these parameters and compare their performance at different levels of additive white Gaussian noise with methods based on correlation, kurtosis, maximum likelihood, and matched filter. Then, we perform synchronization and estimate the start time based on these criteria and several new criteria in two steps: fine and coarse synchronization. Finally, in a more practical setup, we present the idea of jointly estimating the mentioned parameters and the signal start time as coarse synchronization. We compare different criteria and show that one of the proposed criteria has the highest efficiency.

A Study on the Realization of a Digital Bit Synchronizer using the Gauss-Markov Estimation Technique (Gauss-Markov 추정 기법을 이용한 디지탈 비트 동기화기 실현에 관한 연구)

  • Bae, Hyeon-Deok;Ryu, Heung-Gyoon
    • The Journal of the Acoustical Society of Korea
    • /
    • v.9 no.2
    • /
    • pp.61-69
    • /
    • 1990
  • We have investigated the digital bit synchronization problem in baseband communication receiver systems using the Gauss-Markov estimation technique which is equivalent to the weighted least square method. The realized bit synchronizer, including the data detector, processes the input signal two dimensionally into the transition phase and data level under the white Gaussian noise environment. We have confirmed the relization of the bit synchronizer via computer simulation. In addition, we have compared and evaluated the estimation error performance of the proposed method with that of the conventional DTTL method and of the minimum likelihood method.

  • PDF

New Decision Rules for UWB Synchronization (UWB 동기화를 위한 새로운 결정 법칙들)

  • Chong, Da-Hae;Lee, Young-Yoon;Ahn, Sang-Ho;Lee, Eui-Hyoung;Yoo, Seung-Hwan;Yoon, Seok-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.33 no.2C
    • /
    • pp.192-199
    • /
    • 2008
  • In ultra-wideband (UWB) systems, conventionally, the synchronization is to align time phases of a locally generated template and any of multipath components to within an allowable range. However, the synchronization with a low-power multipath component could incur significant performance degradation in receiver operation (e.g., detection) after the synchronization. On the other hand, the synchronization with a high-power multipath component can improve the performance in receiver operation after the synchronization. Generally, the first one among multipath components has the largest power. Thus, the synchronization with the first path component can make better performance than that with low-power component in receiver operation after the synchronization, Based on which, we first propose an optimal decision rule based on a maximum likelihood (ML) approach, and then, develope a simpler suboptimal decision rule for selecting the first path component. Simulation results show that the system has good demodulation performance, which uses new synchronization definition and the proposed decision rules have better performance than that of the conventional decision rule in UWB multipath channels. Between macroblocks in the previous and the current frame. On video samples with high motion and scene change cases, experimental results show that (1) the proposed algorithm adapts the encoded bitstream to limited channel capacity, while existing algorithms abruptly excess the limit bit rate; (2) the proposed algorithm improves picture quality with $0.4{\sim}0.9$dB in average.

A Study on Cell ID Detection Scheme Using Synchronization Signals for 5G NR System (5G NR 시스템을 위한 동기 신호를 이용한 cell ID 검출을 위한 방법 연구)

  • Ahn, Haesung;Cha, Eunyoung;Kim, Hyeongseok;Kim, Jeongchang
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2020.07a
    • /
    • pp.593-595
    • /
    • 2020
  • 본 논문에서는 5G NR 시스템을 위한 동기 신호를 이용한 cell ID 검출 방법에 대한 성능을 비교하였다. 5G NR(fifth-generation new radio) 시스템의 송신기는 SS/PBCH (synchronization signal/physical broadcast channel) 블록을 송신하며, 수신기는 수신된 SS/PBCH 블록을 이용하여 주파수 및 타이밍 오프셋 (frequency and timing offset)을 추정 할 수 있으며, cell ID (cell identity)는 PSS (primary synchronization signal)와 SSS (secondary synchronization signal)를 통해 검출할 수 있다. 본 논문에서는 cell ID 를 검출할 수 있는 방법으로서 2-stage 디코딩 방법과 결합 최대우도 결정 규칙 (joint maximum-likelihood decision rule: joint ML) 디코딩 방법을 사용하였다. Joint ML 디코딩 방법은 2-stage 디코딩 방법에 비해 더 좋은 검출 성능을 보이지만, 복잡도 측면에서는 2-stage 디코딩 방법이 joint ML 디코딩 방법에 비해 더 낮은 복잡도를 갖는 것을 확인하였다.

  • PDF

ML Frame Synchronization for Gaussian Channel with Co-channel Interference (가우스 잡음과 CO-CHANNEL 간섭이 존재하는 채널에서의 최대추정 프레임 동기)

  • 문병현;우홍체;김신환;이채욱
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.18 no.5
    • /
    • pp.643-649
    • /
    • 1993
  • The problem of locating a periodically inserted frame synchronization pattern in random data for a binary pulse amplitude modulated (PAM) digital communication system over a additive white Gaussian noise(AWGN) channel with co-channel interference is considered. The performance degradation of frame synchronization for the correlation rule due to the presence of co-channel interference is shown. The maximum likelihood(ML) decision rule for the frame synchronization over an AWGN channel with co-channel interference is derived. For the entire range of SNR considered, the ML frame synchronization rule obtains about 1dB signal energy gain over the correlation rule. Specially, the ML rule obtains as much as 2dB gain over the correlation rule when the SNR is greater than 0dB.

  • PDF

Synchronization for VDSL system using DMT (DMT 방식을 이용한 VDSL시스템의 동기)

  • 최병익;우정수;임기홍
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.10C
    • /
    • pp.951-962
    • /
    • 2002
  • A DMT transceiver recovers the sampling time from reserved sub-carriers, the pilots. Since the pilots are available after the FFT, the symbol synchronization must be done before sample synchronization. In DMT VDSL system, symbol synchronization is handled separately from sample synchronization, although the two processes are intimately related. The DMT symbol itself contains sufficient information, the cyclic extension, for symbol synchronization. Using only the sign bit of received signal, the Maximum Likelihood Estimation solution is derived. The Tx windowing in the transmitter of DMT VDSL system results in the blurring of MLE peaks. We propose the weighted summing MLE method using the sign bit which produces the clearly sharp top of MLE peaks. The stability of symbol synchronization is improved significantly by averaging over a few symbols. This paper presents the study of the original MLE and the weighted summing MLE using sign bit. A clock difference between transmitter and receiver destroys the oahogonality of the carriers. Therefore, a receiver using asynchronous sampling must perform timing correction in the discrete-time domain. We introduce an efficient digital sample synchronization method which is based on temporal and frequency domain digital signal processing.

A 95% accurate EEG-connectome Processor for a Mental Health Monitoring System

  • Kim, Hyunki;Song, Kiseok;Roh, Taehwan;Yoo, Hoi-Jun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.16 no.4
    • /
    • pp.436-442
    • /
    • 2016
  • An electroencephalogram (EEG)-connectome processor to monitor and diagnose mental health is proposed. From 19-channel EEG signals, the proposed processor determines whether the mental state is healthy or unhealthy by extracting significant features from EEG signals and classifying them. Connectome approach is adopted for the best diagnosis accuracy, and synchronization likelihood (SL) is chosen as the connectome feature. Before computing SL, reconstruction optimizer (ReOpt) block compensates some parameters, resulting in improved accuracy. During SL calculation, a sparse matrix inscription (SMI) scheme is proposed to reduce the memory size to 1/24. From the calculated SL information, a small world feature extractor (SWFE) reduces the memory size to 1/29. Finally, using SLs or small word features, radial basis function (RBF) kernel-based support vector machine (SVM) diagnoses user's mental health condition. For RBF kernels, look-up-tables (LUTs) are used to replace the floating-point operations, decreasing the required operation by 54%. Consequently, The EEG-connectome processor improves the diagnosis accuracy from 89% to 95% in Alzheimer's disease case. The proposed processor occupies $3.8mm^2$ and consumes 1.71 mW with $0.18{\mu}m$ CMOS technology.

Pilot-Aided Iterative Frequency Offset Estimation for Digital Video Broadcasting Systems (디지털 비디오 방송 시스템에서의 파일럿을 이용한 반복적 주파수 옵셋 추정방법)

  • Lee, Kyung-Taek;Seo, Jong-Soo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.5A
    • /
    • pp.484-489
    • /
    • 2007
  • The main disadvantage of orthogonal frequency division multiplexing (OFDM) systems is its sensitivity to carrier frequency offset and timing offset. This paper proposes a simple way of improving the performance of the integer frequency offset (IFO) estimator in OFDM-based digital video broadcasting (DVB) system. By modifying the conventional maximum likelihood (ML) estimator to have multi-stage estimation strategy, IFO estimator is derived. Simulations indicate that the proposed IFO estimator works robustly with reduced computational burden when compared to ML estimator.

A Maximum Likelihood Method of Code Tracking Loop Using Matched Filter in Multi-path Channel (다중경로 채널에서 정합필터를 이용한 코드 추적 루프최대 우도 알고리즘)

  • Son, Seung-Ho;Lee, Sang-Uk
    • Journal of Satellite, Information and Communications
    • /
    • v.5 no.1
    • /
    • pp.54-57
    • /
    • 2010
  • The navigation system like GPS which is core technology is based on Code Division Multiple Access(CDMA) techniques. To receive satellite signal smoothly in CDMA, received signals have to synchronize with spread code. In this paper, we focus on the code tracking methods among synchronization techniques. The conventional delay lock loop(DLL) is unsuitable for multi-path channel. We will introduce how it overcomes distortion by multi-path. We will propose method that separates out multi-path signals and tracks the each path signals. And we will confirm performance of proposed method using Spirent simulator.