• 한국공간구조학회논문집
• /
• 제19권1호
• /
• pp.109-116
• /
• 2019

In this paper, the shape adjustment algorithm of the spoked wheel cable structures with retractable membrane system is studied. The initial tension of the membrane or cable is necessary to form the structure and its value is determined by the design shape. However, due to internal and external environmental influences, its shape may be different from the initial designed shape. In the case of the cable structures covered in this study, tension adjustment is necessary to maintain the designed shape because it influences the tension of the cable depending on the state of the retractable membrane. Therefore, we proposed an adjustment algorithm of an initial shape based on the force method. The effectiveness and validity of the methodology were examined through the applicable cable structures. The results of the shape adjustment analysis of the symmetric spoked wheel cable model were reliable and accurate results were obtained.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.107-115
• /
• 2020

Support vector regression (SVR) is devised to solve the regression problem by utilizing the excellent predictive power of Support Vector Machine. In particular, the ⲉ-insensitive loss function, which is a loss function often used in SVR, is a function thatdoes not generate penalties if the difference between the actual value and the estimated regression curve is within ⲉ. In most studies, the ⲉ-insensitive loss function is used symmetrically, and it is of interest to determine the value of ⲉ. In SVQR (Support Vector Quantile Regression), the asymmetry of the width of ⲉ and the slope of the penalty was controlled using the parameter p. However, the slope of the penalty is fixed according to the p value that determines the asymmetry of ⲉ. In this study, a new ε-insensitive loss function with p1 and p2 parameters was proposed. A new asymmetric SVR called GSVQR (Generalized Support Vector Quantile Regression) based on the new ε-insensitive loss function can control the asymmetry of the width of ⲉ and the slope of the penalty using the parameters p1 and p2, respectively. Moreover, the figures show that the asymmetry of the width of ⲉ and the slope of the penalty is controlled. Finally, through an experiment on a function, the accuracy of the existing symmetric Soft Margin, asymmetric SVQR, and asymmetric GSVQR was examined, and the characteristics of each were shown through figures.

• 대한건축학회논문집:구조계
• /
• 제35권8호
• /
• pp.139-148
• /
• 2019

The lightweight structures such as domes are particularly vulnerable when it has been subjected to high temperature induced by the fire. It is therefore crucial to predict the possible instability path of structures exposed to the fire in structural design process. In this study, the instabilities of single-layer domes is investigated by using finite element technologies with the consideration of high temperature. The material properties of members under high temperature are considered by using the reduction factors which is provided in Eurocodes 3. Some damage patterns are assumed with use of a structural unit which is symmetric in radial direction. For numerical evaluations, the geometrically nonlinear truss element is implemented and the arch-length control method is employed to trace the post-buckling behaviour of domes. From numerical results, it is found to be that a significant change of post-buckling behaviour is detected in dome structures when structural members are exposed to the fire.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권6호
• /
• pp.575-582
• /
• 2021

Background: The aim of this randomized, triple-blind trial was to determine the anesthetic, analgesic, and hemodynamic effects of articaine and bupivacaine in the extraction of impacted mandibular third molar teeth. Methods: Twenty-six patients who underwent removal of bilaterally symmetric mandibular third molars were randomly assigned to articaine and bupivacaine groups in a split-mouth design. The onset of anesthetic action, intraoperative comfort, total amount of solution used, duration of postoperative anesthesia and analgesia, rescue analgesic use, postoperative pain, intraoperative bleeding, and hemodynamic parameters were evaluated. Results: In the articaine group, the onset of anesthetic activity was faster, intraoperative comfort was greater, and effective anesthesia required less local anesthetic solution. The bupivacaine group showed a significantly longer duration of postoperative anesthesia and analgesia, in addition to lower visual analog scale values at 6 and 48 hours postoperatively. There were no significant differences between the two solutions regarding rescue analgesic medication use, intraoperative bleeding, or hemodynamics. Conclusion: Articaine showed greater clinical efficacy than bupivacaine in intraoperative anesthesia, achieving faster onset of anesthetic action and greater patient comfort while also requiring less reinforcement during surgery. However, bupivacaine was superior in terms of postoperative anesthesia, reducing postoperative pain due to its residual anesthetic and analgesic effects. Both anesthetic solutions led to similar hemodynamics at low doses in mandibular third molar surgery

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1221-1229
• /
• 2022

In this work, the guided wave de-bonding area-detecting technique was studied for application to containment liner plates in nuclear power plant areas. To apply this technique, an appropriate Lamb wave mode, symmetric and longitudinal dominance, was verified by the frequency shifting technique. The S0 2.7 MHz mm Lamb wave mode was chosen to realize quantitative experimental results and their visualization. Results of the bulk wave, longitudinal wave mode, and comparison experiments indicate that the wave mode was able to distinguish between the de-bonded and bonded areas. Similar to the bulk wave cases, the bonded region could be distinguished from the de-bonded region using the Lamb wave approach. The Lamb wave technique results showed significant correlation to the de-bonding area. As the de-bonding area increased, the Lamb wave energy attenuation effect decreased, which was a prominent factor in the realization of quantitative tomographic visualization. The feasibility of tomographic visualization was studied via the application of Lamb waves. The reconstruction algorithm for the probabilistic inspection of damage (RAPID) technique was applied to the containment liner plate to verify and visualize the de-bonding condition. The results obtained using the tomography image indicated that the Lamb wave-based RAPID algorithm was capable of delineating debonding areas.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.375-388
• /
• 2022

In this work, limit elastic speed analysis of functionally graded porous rotating disks has been reported. The work proposes an effective approach for modeling the mechanical properties of a porous functionally graded rotating disk. Four different types of porosity models namely: uniform, symmetric, inner maximum, and outer maximum distribution are considered. The approach used is the variational principle, and the solution has been achieved using Galerkin's error minimization theory. The study aims to investigate the effect of grading indices, aspect ratio, porosity volume fraction, and porosity types on limit angular speed for uniform and variable disk geometries of constant mass. To validate the current study, finite element analysis has been used, and there is good agreement between the two methods. The study yielded a decrease in limit speed as grading indices and aspect ratio increase. The porosity volume fraction is found to be more significant than the aspect ratio effect. The research demonstrates a range of operable speeds for porous and non-porous disk profiles that can be used in industries as design data. The results show a significant increase in limit speed for an exponential disk when compared to other disk profiles, and thus, the study demonstrates a range of FG-based structures for applications in industries that will not only save material (lightweight structures) but also improve overall performance.

• Journal of Korea Trade
• /
• 제23권2호
• /
• pp.46-58
• /
• 2019

Purpose - This paper analyzes how Research and Development (R&D) cartelization and Research Joint Ventures (RJV) affect firms that engage in Cournot competition in their product market using a model in which the Home and Foreign firm produce differentiated products and export their total output to a third country's market. Design/Methodology - In a two-stage game, research expenditures incurred in the first stage improve product quality and are subject to various degrees of spillovers. We consider four different scenarios. Findings - In a symmetric equilibrium we observe the following: (i) an RJV that cooperates in R&D decision yields the highest R&D expenditure. However, the scenario which yields the lowest expenditure depends on the extent of differentiation between the goods and the degree of spillovers; (ii) RJV cartelization yields the highest product quality, output, and consumer surplus in the third country; however, the lowest is produced by R&D competition if spillovers are strong and by R&D cartelization if spillovers are weak; and (iii) each firm's profit is at its minimum in R&D competition and its maximum in RJV cartelization. Furthermore, if spillovers are strong, the profit of each firm in R&D cartelization is greater than that in RJV competition, and vice versa. Originality/value - By analyzing product innovation in international markets, we can find similarities and differences between process R&D and product R&D in international markets.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.75-80
• /
• 2023

미래의 무선과 휴대용 계산 응용에서 DCT 대체할 수 있는 가역적인 블록 변환의 구현을 제시하였다. 이것을 binDCT라 불린다. BinDCT에서 정방향과 역방향 변환들은 이진 천이와 더하기 연산으로 구현될 수 있다. 그리고 binDCT는 바람직한 DCT 특징인(고코딩이득, DC손실 없음, 대칭적인 기저함수, 재귀적 구성)을 유지한다. 또한 binDCT는 lifting 특징인(빠른 구현, 가역적인 정수대정수 매핑, 내부 계산)을 유지한다. 따라서 복잡한 DCT 연산을 보다 빠르게 실행할 수 있는 장점을 가진다. 이 논문에서는 DCT와 binDCT의 계산비용과 성능분석을 Shapiro의 EZW을 사용하여 제시하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권7호
• /
• pp.402-413
• /
• 2004

본 논문에서는 국내 표준 128비트 블록 암호화 알고리즘인 SEED를 소형 내장형(8-bit/ 16-bit) 시스템에 탑재하도록 저가의 FPGA로 구현하는 방법을 제안한다. 대부분 8-bit 또는 16-bit의 소규모 내장형 시스템들의 프로세서들은 그 저장용량과 처리속도의 한계 때문에 상대적으로 계산양이 많아 부담이 되는 암호화 과정은 별도의 하드웨어 처리기를 필요로 한다. SEED 회로가 다른 논리 블록들과 함께 하나의 칩에 집적되기 위해서는 적정한 성능을 유지하면서도 면적 요구량이 최소화되는 설계가 되어야 한다. 그러나, 표준안 사양의 구조대로 그대로 구현할 경우 저가의 FPGA에 수용하기에는 면적 요구량이 지나치게 커지게 되는 문제점이 있다. 따라서, 본 논문에서는 면적이 큰 연산 모듈의 공유를 최대화하고 최근 시판되는 FPGA 칩의 특성들을 설계에 반영하여 저가의 FPGA 하나로 SEED와 주변 회로들을 구현할 수 있도록 설계하였다. 본 논문의 설계는 Xilinx 사의 저가 칩인 Spartan-II 계열의 XC2S100 시리즈 칩을 대상으로 구현하였을 때, 65%의 면적을 차지하면서 66Mpbs 이상의 throughput을 내는 결과를 얻었다. 이러한 성능은 작은 면적을 사용하면서도 목표로 하는 소형 내장형 시스템에서 사용하기에 충분한 성능이다.

• 항공우주시스템공학회지
• /
• 제14권3호
• /
• pp.42-50
• /
• 2020

우주용 적외선 센서의 탑재 교정용 흑체 시스템은 궤도상에서 센서 출력특성 교정을 위해 다양한 기준온도에서 한정된 개수의 온도센서로부터 고정밀의 대표표면온도 추정이 가능해야 한다. 본 논문에서 제안된 흑체 시스템은 흑체 가열 후 잔열 수송을 위한 히트파이프를 흑체 후면 중앙의 일체형 플랜지에 결합하는 방식을 적용하였다. 따라서 흑체 표면온도구배 최소화와 함께 원형 대칭 형태의 온도구배를 얻을 수 있어 표면온도 추정이 용이하면서도 발사 및 궤도환경에서 하중이 가해지더라도 안정적인 히트파이프 접속부를 갖도록 하며, 복수의 히트파이프 적용에 따른 Fail Safe 설계가 가능하도록 한다. 또한 온도센서 부착작업이 용이하도록 센서를 흑체 외부 표면에 적용하더라도 높은 정확도로 표면온도 추정이 가능하다. 본 논문에서 제안된 흑체 시스템의 설계 유효성 입증을 위해 궤도 열해석을 수행하였으며, 해석결과를 기반으로 온도센서 개수 및 위치에 따른 대표표면온도 추정을 실시하였다.