• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.189-194
• /
• 2001

This paper presents a mew design of an inductive position sensing system with high sensitivity. The designed system consists of the driving coils, position-detecting coils, and closed loop formed magnetic blocks. To obtain high sensitivity we design a symmetric and closed loop type measuring system with small air-gaps. The elements that affect the system characteristics are turn ratio, excitation frequency, air-gap size, capacitance effect, and load resistance. By experimental investigation, the influences of these elements are examined and the system parameters are selected. The sensitivity of the newly designed system is greater than 2800mV/(V mm) and the linearity error is below${\pm}0.01%; in; the; range; of; {\pm}200{\mu}m$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.230-231
• /
• 2011

There is a merit a planetary gear set disperses a delivery load, and to decrease loss of friction and noise. But, in addition to meshing this internal and external gear simultaneously and phase difference by the tooth contact point and the time difference occurs asymmetric and symmetric sideband noise and vibration caused by the modulation in the vehicle. Existing planetary gear set research have progressed to reduce the cause of the sideband as run-out, pitch error and imbalance. In this paper presents a method for the design of the carrier phase difference by developing various theorys and experiments for gear noise.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.215-219
• /
• 2009

For the effective manufacture of doubly curved metal plates, a line array roll set (LARS) process is proposed. The suggested process utilizes a pair of upper and lower symmetric roll assemblies. In the process, the initial plate is progressed into the final shape in a stepwise or pathwise manner according to the basic principle of the incremental forming process. In this work, the intermediate shape which is closest to a final shape is proposed to fabricate the desired shape effectively in design of forming schedule. The intermediate shape has homogeneous curvature in a longitudinal and transverse direction so that it can be fabricated easily without complicated controls of rolls in the roll set. The method of approximation using genetic algorithm is proposed and applied to some actual ship hulls to evaluate the efficiency of the algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1968-1974
• /
• 1997

In this paper, the spectral domain approach is employed to investigate the characteristics of symmetrical and asymmetrical broadside-coupleed coplanar waveguides(BSC-CPW). These structures have large even(c)-odd(.pi.) mode-velocity ratio, suitable for wide-band and tight-coupling microwave circuit design. Efficient design parameters can be obtained from the effective dielectric constants and characteristic impedances calculated by varying the strip widths and slot widths in the BSC-CPW structure.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.05a
• /
• pp.85-89
• /
• 1999

Numerical Analysis has been done for the supersonic off-design jet flow due to the pressure difference between the jet and the ambient fluid. The difference of pressure generates an oblique shock or an expansion wave at the nozzle exit, The waves reflect repeatedly at the center axis and on the sonic surface in the shear layer, and the pressure difference is resolved across these waves interacted with the turbulence mixing layer. In this paper, the axi-symmetric Navier-Stokes equation has been used with two equation $k-{\varepsilon}$ turbulence closure model. The second order TVD scheme with flux limiters, based on the flux vector split by the smooth eigenvalue split, has been used to capture internal shocks and other discontinuities. The correction term for the compressible flow and the damping function are used in the turbulence model. Numerical calculations have been done to analyze the off-design jet flow due to the pressure difference. The variation of pressure along the flow axis is compared with an experimental result and other numerical result. The characteristics of the interaction between the shock cell and the turbulence mixing layer have been analyzed.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.274-279
• /
• 1997

A magnetic spectrometer was designed for out-of-plane coincidence (e, e' P) measurements in electron scattering. The spectrometer consists of four magnetic spectrometers with different polar angles about the symmetric axis in the scattering plane. The performance of the machine was optimized for the precision measurements of nucleons and few-body nuclei. This paper presents the ion-optical design and measured performance of one spectrometer which was constructed as a prototype.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.646-648
• /
• 2010

A Sensor Node in Wireless Sensor Network has very limited resources such as processing capability, memory capacity, battery power, and communication capability. When the communication between any two sensor nodes are required to be secured, the symmetric key cryptography technique is used for its advantage over public key cryptography in terms of requirement of less resources. Keys are pre-distributed to each sensor node from a set of keys called key pool before deployment of sensors nodes. Combinatorial design helps in a great way to determine the way keys are drawn from the key pool for distributing to individual sensor nodes. We study various deterministic key predistribution techniques that are based on combinatorial design.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.20-20
• /
• 2000

2개의 경사 충격파와 하나의 수직 충격파로 초음속 유동을 압축하는 초음속 공기 흡입구의 수치적 연구를 수행하였다. 지배방정식으로는 Navier-Stokes방정식을 사용하였고 난류모델로는 SST 모델을 사용하였다. 지배방정식의 점성항 계산에는 중심차분법을 사용하였고 대류항 계산에는 풍상차분법인 Roe의 FDS기법을 MUSCL기법과 결합하여 이용하였다. 유한 체적법을 이용하여 차분된 방정식은 LU분할 기법을 이용한 완전 내재적 방법으로 2차 정확도 시간 적분으로 비정상 과정의 연구를 수행하였다. 흡입구 배압을 정해주어야 하는 어려움을 해결하기 위해 흡입구 후면에 노즐을 달고 노즐의 면적을 조절하여 배압이 형성되도록 하였다.(중략)

• Journal of ILASS-Korea
• /
• v.24 no.3
• /
• pp.122-129
• /
• 2019

Flow uniformity in aftertreatment system is an important factor in determining uniform catalytic reaction and filtration. In this study, variety types of DOC-DPF system design were analyzed to increase flow uniformity. For this analysis, ANSYS Fluent was used with porous media setup for DOC and DPF. Turbulent flow was modeled by standard $k-{\varepsilon}$ model excepting porous media. Uniformity index was utilized to evaluate the flow uniformity quantitatively. Reference design showed low velocity region because two large vortex were generated before baffle. When radius of DOC-DPF system was increased, exhaust pressure acting on the inlet decreases and velocity distribution was shifted to one side. When inlet pipe was set to axial center of DOC-DPF system velocity distribution was symmetric. However, flow was not dissipated until the front end of DOC and showed higher uniformity index. When the volume of DOC was reduced while fixed volume of entire DOC-DPF system and baffle plate is located downstream of the DOC-DPF system, there was improvement in uniformity index.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.425-431
• /
• 1996

KT-2 poloidal-field (PF) system is designed to cope the up-down symmetric double-null (DN) and asymmetric single-null (SN) discharges with typical plasma parameters, in which three sets of "design-basis" scenarios - the ohmic heating (OH), the 5MW and the high bootstrap (HIBS) baseline modes - are applied. The power and energy demand for each cases are also deduced. The peak power and the maximum energy requirements for the KT-2 magnet system, incorporating the PF and the toroidal-field (TF) coils, are proven to be 123MW and 1601MJ, respectively when it is driven in DN configuration. The KT-2 PF system is capable of achieving the machine mission of creating a 500kA heated plasma with a current flattop of $\geq$20 seconds.