• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.748-750
• /
• 2001

This paper describes numerical analysis of eddy current testing for tube with axi-symmetric defect using boundary element method. In this ECT(Eddy Current Testing) numerical analysis. BEM and FEM are used to compare their characteristics and results of ECT, respectively BEM is easier than FEM to design geometrically complex domain because in case of BEM, domain is divided into segments or elements, but in case of FEM, domain is divided into small finite triangular or quadrilateral elements. For this reason asymmetry defect is used for this BE numerical analysis. As a result, the similar result can be obtained through both numerical analyses, and BEM can be applied to the numerical analysis of ECT.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.634-637
• /
• 2002

Transducer for linear ultrasonic motor with symmetric and anti-symmetric modes was studied. The transducer was composed of two Langevin-type vibrators. In order to excite two vibration modes, Two Langevin-type vibrators must have 90-degree phase difference with each other. As result, tip of transducers moves in elliptical motion. In this paper, vibration shape of transducer was simulated and The resonant frequency and maximum displacement were calculated using the FEA (Finite Element Analysis).

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.197-205
• /
• 1996

Four types of three-waveguide optical switches are analyzed by measns of the coupled mode theory. Assuming that three proximate waveguides of an optical switch are identical and equally spaced, we examine the switching behavior for both cases where an incident beam is launched into 1) the outer waveguide, 2) the center waveguide. For each beam-launching case, switching voltage is applied so that three waveguides refractive indices be detuned 1) symmetric, 2) anti-symmetric. It is concluded that only three types of optical switches out of four an perform the switching operation. We derive the switching conditions for ach of three possible types and draw the corresponding switching diagrams.

• Tribology and Lubricants
• /
• v.33 no.5
• /
• pp.187-201
• /
• 2017

This paper presents the impact of couple stress lubricant on performance of slot-entry hydrostatic/hybrid journal symmetric/asymmetric bearings. Reynolds Equation using Finite Element Technique has been solved for the flow of couple stress and Newtonian lubricants in bearings. The results have been computed for concentric design pressure ratio(${\beta}^{\ast}=0.5$), slot width ratio (SWR = 0.25) and chosen parameters of couple stress lubricant ${\bar{l}}=5$, 10, 15. It is observed that numerically simulated outcomes for slot-entry journal bearings, considering the influence of couple stress lubricant indicate a substantial improvement in the performance of the bearing.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.3-7
• /
• 2007

There have been numerous studies directed toward the development of driving mechanisms for off-road mobility and rescue robots. To achieve surveillance, reconnaissance, and rescue, it is necessary for robots to have a driving mechanism that can handle off-road environments, We propose a new type of single-track driving mechanism with a variable geometry for a rescue robot, This mechanism has a symmetric configuration so that the robot can advance in two directions and also remain operable when overturned. By transforming its geometry, the robot can reduce energy consumption in steering and rotating as well as maximize its ability to climb obstacles such as stairs. The robot is also designed to have a compact size and low center of gravity to facilitate driving when on a set of stairs. In this paper, we analyzed the design parameters of the robot for the four phases of climbing stairs and determined the specifications needed to enhance its adaptability.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.293-300
• /
• 2012

Reliability measures of questionnaire and ${\chi}^2$ contingency tests of categorized responses are most practical tools to analyze the characteristics of subjects of survey study. This research evaluates the Cronbaha's reliability measures by using Repeated Measure Design (RMD) with illustrated MINITAB examples. In addition, ${\chi}^2$ statistics of each cell of categorized tables can be effectively interpreted with the symmetric plot of correspondence analysis. The practical example is also discussed to provide comprehensive understanding of topic.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.266-274
• /
• 2017

In this paper, torques of two motors are compared by Finite Element Analysis (FEA). One has a symmetric rotor structure and the other has an asymmetric rotor structure. The comparison shows that the asymmetric rotor structured motor has reduced torque ripple compared to the symmetric. The torque of the compared motor models was analyzed by separating into magnetic torque and reluctance torque. Through the analysis of torque component separated, it is shown that the magnetic torque and the reluctance torque compensate each other in the motor with the asymmetric structure rotor. Here "compensate" means decrementing the effect of one or more harmonics. It is shown how this compensation appears between the magnetic torque and the reluctance torque by looking into back electro motive force (emf) and the relative permeability distribution of rotor core.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.418-421
• /
• 2001

The ceramic filters were developed using technology similar to that of quartz crystal and electro- mechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emphasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creak coupled symmetric and anti- symmetric vibration modes. Accordingly, the simulation for ceramic (inter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.258-264
• /
• 1999

The purpose of this paper is to investigate the damping behavior of a flexible joint. The slip at a structrual joint is selected at the tips of two identical cantilever beams adjoining each other. Both the direction of normal force and its magnitude varies due to the global deformation of the structure from mode to mode in the friction model. The friction dependent on vibration displacements resultsin the same functional behavior of the hysteretic material damping. Linearized energy loss factors are obtained as functions of both linear and torsional spring stiffness for their groups of symmetric and anti-symmetric modes, respectively. Experimental measurements as made for comparisons with analytical estimations by controlling the magnitude of fastening torque in the fastener, Hi-Lite. Trends on damping levelsmeasured in a very common vibration test method make an excellent agreement on the estimated damping levels.

• Journal of the Korean Mathematical Society
• /
• v.58 no.3
• /
• pp.723-740
• /
• 2021

Design and maintenance of large span roof structures require an analysis of their static and dynamic behavior depending on the physical parameters defining the structures. Therefore, it is highly desirable to estimate the parameters from observations of the system. In this paper we study the parameter estimation problem for damped shallow arches. We discuss both symmetric and non-symmetric shapes and loads, and provide theoretical and numerical studies of the model behavior. Our study of the behavior of such structures shows that it is greatly affected by the existence of critical parameters. A small change in such parameters causes a significant change in the model behavior. The presence of the critical parameters makes it challenging to obtain good estimation. We overcome this difficulty by presenting the Parameter Estimation Algorithm that identifies the unknown parameters sequentially. It is shown numerically that the algorithm achieves a successful parameter estimation for models defined by arbitrary parameters, including the critical ones.