• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.370-374
• /
• 1991

A high performance fully ion-implanted InP JFET was characterized for high speed switching elements. The switch has an insertion loss of 5.5dB with 31.6dB isolation at 1GHz. This device can effectively swithc a byte-multiplexed 2Gb/s signal and an eye-diagram taken at 2Gb/s shows an error-free eye pattern. Therefore, this device can be used as a switching element for high transmission data rate for monolithic integration of optoelectronic circuit in the long-wavelength region.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.2870-2888
• /
• 2017

Recent studies have shown that the flow table size of hardware SDN switch cannot match the number of concurrent flows. Combined SDN Forwarding Element (CFE), which comprises several software switches and a hardware switch, becomes an alternative approach to tackle this problem. Due to the limited capacity of software switch, the way to route concurrent flows in CFE can largely affect the maximum delay that a flow suffers at CFE. As delay-guarantee is a nontrivial task for network providers with the increasing number of delay-sensitive applications, we propose an analytical model of CFE to evaluate a rules placement solution first. Next, we formulate the problem of Rules Placement with delay guarantee in CFE (RPCFE), and present the genetic-based rules placement (GARP) algorithm to solve the RPCFE problem. Further, we validate the analytical model of CFE through simulations in NS-3 and compare the performance of GARP with three benchmark algorithms.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.461-466
• /
• 2004

본 논문에서는 스위칭 소자를 사용한 새로운 형태의 편파 다이버시티 개구 결합 원편파 패치 안테나를 제안하였다. 제안된 안테나의 구조는 정사각형 패치의 모서리를 왜곡시킨 단일 패치이며, 급전은 전력 분배기 형태의 마이크로스트립 급전에 Schottky 다이오드를 삽입시킨 형태이다. 스위칭 소자인 Schottky 다이오드는 급전의 전력 분배 지점에서 $\lambda$/4 떨어진 위치에 삽입하였으며, Schottky diode의 ON/OFF 동작으로 방사체인 패치의 급전이 변화를 이루어 좌$.$우 선회 원편파로 변화되는 구조로 설계하였다. 스위칭 동작에 의해 측정되어진 안테나의 3 dB 축비 대역폭은 약 2 %로 측정되어졌다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.465-470
• /
• 2001

Two-phase BLDC(brushless DC) motor has larger torque ripple than three-phase BLDC motor because of its unique skeleton-type structure. An electronic switching mechanism to change the current-direction of the BLDC motor can be a source of vibration as well as unbalanced rotor weight. A proper switching timing which makes less vibrations was considered by changing the position of sensing element around the center of rotation. Also, the current of the motor was measured for the calculation of the motor efficiency. From the vibration test results and with the consideration of the motor efficiency, an optimal switching position of the Hall sensor was found.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.136-139
• /
• 2004

This paper presents a buck circuit topology of high-frequency with a single switching element. It solved the problem which arised from hard-switching in high-frequency using a resonant snubber and operating under the principle of ZCS turn-on and ZVS turn-off commutation schemes. In the existing circuit, it has the voltage stress which is twice of input voltage in free-wheeling diode. But in the proposed circuit, it has voltage stress which is lower than input voltage with modifing a location of free-wheeling diode. In this paper, it explained the circuit operation of each mode and confirmed the waveform of each mode with simulation result. Also the experiment result verified the simulation waveform and compared the existing voltage stress of free-wheeling diode with the proposed voltage stress of that. Moreover, it compares and analyzes the proposed circuit's efficiency with the hard-switching circuit's efficiency according to the change of load current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.63-65
• /
• 2004

The recent advancement in the power electronic technique has increased the use of induction motor fed by inverter using high-frequency switching devices. Also the tendency is toward larger size and higher voltage. Therefore, The IGBT (Insulated-Gate Bipolar Transistor) that is high switching frequency element has been using increase. But, The switching surge voltage was occurred by high switching frequency of inverter has appeared a voltage doubling in the motor input terminal due to mismatching of cable characteristic impedance and motor characteristic impedance. Actually, The Switching surge voltage became the major cause to occur the insulation failure by serious voltage stress in the stator winding of induction motor. The short during rise time of switching surge and cable length is increased, the maximum transient voltage seen at the motor terminals increases. In this paper, Analyzed switching surge transient voltage of power cable pulling is used EMTP(Electromagnetic Transient Program) at the induction motor terminal and in cable.

• 대한전자공학회논문지SD
• /
• 제39권4호
• /
• pp.10-18
• /
• 2002

본 논문에서는 IPS모드의 액정 셀에서 전압에 따른 액정 거동을 수치 해석적으로 계산하는 방법을 보고한다. 액정 거동을 해석하기 위해 복잡한 구조에 적용이 용이한 3차원 유한 요소법을 사용하여 액정 셀 내부의 전압 분포와 전계 분포를 계산하였다. 전기 에너지와 액정 분자의 탄성 에너지로 이루어지는 액정 셀 내부의 자유에너지 밀도를 고려하였으며, 에릭슨-레슬리(Ericksen-Leslie) 방정식과 라플라스(Laplace) 방정식을 해석함으로서 액정 셀의 스위칭 특성을 계산하였다. 24㎛×12㎛×4.5㎛ 사이즈의 IPS 모드 액정 셀에 대하여 1,859개의 노드와 8,640개의 사면체 요소를 생성하여 16ms까지 과도 해석하였다. 그 결과, 전극 위 부분을 제외한 영역에서 횡방향의 전계가 형성되었고, 전극 위 영역에서 전경선(disclination)이 발생하는 것을 확인하였다.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1130-1136
• /
• 2015

Most equipments which are used to measure the switching power of the turnout depend on imports. As the data is limited to the measurements of the switching power, it is said that the equipment is insufficient to check the errors of the turnout and the electrical point machine, and set up the data for operating and maintenance. We studied not only measurements of the switching power of all turnout being used in domestic but also the development of the turnout performance total analysis equipment which can measure switching time, voltage, and current etc. at the same time. Considering that switching power of the turnout is the most basic element to check the irregularities of the turnout, in this paper, we analyzed the irregularities of the turnout through correlation between switching power of the turnout, voltage, and current of the electrical point machine. Also we performed test in commercial railway line where the turnout of MJ81 type and NS type was installed. And it is said that the test results can be used as basic technologies for ICT based real-time diagnosis and monitoring of the turnout.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.467-475
• /
• 1999

This paper presents an analysis method of a forward converter, using both the finite element method considering the external circuit and a state variables equation. The converter operates at 50kHz and its one period is divided into two modes for the simplicity of the analysis. In the first mode, the switching transistor turns on and an input power is transferred into the load by the electromagnetic conversion action of a ferrite transformer. In the second mode, the switching transistor turns off and the stored energy in an inductor is delivered to the load, and the transformer core is demagnetized by the reset winding current. In this paper, time-stepping finite element method taking into account the on-state electrical circuit of the converter in used to analyze both the electrical circuit and electromagnetic field of the magnetic device during the first mode and the demagnetization period of the transformer core. Then a state variables equation for the circuit which the inductor current flows is constituted and solved during the second mode. As a result, the simulation results have been good agreement with the results obtained form experiment.

• 대한전기학회논문지
• /
• 제33권4호
• /
• pp.127-133
• /
• 1984

In this paper the performance of a variable-phase thyristor motor combined with a phase splitter and a single-phase tapped induction motor is investigated. The phase splitter consists of a bridge type thyristor switching circuit. The regulating power flow of the phase splitter is obtained from the switching phase difference of thyristor switching sequences. The proper switching performance improves the torque-speed-characteristics of the motor and its operation efficiency. We simplify the motor system th using the tapped windng reactances of the motor as the complementary element of the thyristor phase splitter. We discussed the practicality of this motor system through the analysis of simulation result and the voltage and the current wave forms obtained froms obtained from the experiment.