• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.888-893
• /
• 2012

Quality of Service (QoS) provisioning is an important issue in the design of next generation wireless network. In visible light communication (VLC) networks, link switching is a solution to maintain or improve the quality of communication. In this paper, we propose a novel link switching scheme using the location of mobile nodes (MNs). The current serving transmitter uses location history of the MN to find out which neighbor transmitter the MN is approaching. This neighbor transmitter is chosen to inform the MN as the next serving transmitter. The simulation results show that our proposed scheme gains better performance than non-predictive link switching scheme.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.1
• /
• pp.7-12
• /
• 2011

The flash memory has been remarked as the next generation media of portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major data storage components for desktop and servers. The purpose of our study is to upgrade a traditional mirroring scheme based on SSD storages due to the relatively slow or freezing characteristics of write operations, as compared to fast read operations. For this work, we propose a new storage management scheme called Memory Mirror-Switching based on traditional mirroring scheme. Our Mirror-Switching scheme improves flash operation performance by switching write-workloads from flash memory to RAM and delaying write operations to avoid freezing. Our test results show that our scheme significantly reduces the write operation delay and storage freezing.

• Structural Engineering and Mechanics
• /
• v.20 no.2
• /
• pp.191-207
• /
• 2005

Time delay exists inevitably in active control, which may not only degrade the system performance but also render instability to the dynamic system. In this paper, a novel active controller is developed to solve the time delay problem in flexible structures. By using the independent modal space control method, the differential equation of the controlled mode with time delay is obtained from the time-delay system dynamics. Then it is discretized and changed into a first-order difference equation without any explicit time delay by augmenting the state variables. The modal controller is derived based on the augmented system using the discrete variable structure control method. The switching surface is determined by minimizing a discrete quadratic performance index. The modal coordinate is extracted from sensor measurements and the actuator control force is converted from the modal one. Since the time delay is explicitly included throughout the entire controller design without any approximation, the system performance and stability are guaranteed. Numerical simulations show that the proposed controller is feasible and effective in active vibration control of dynamic systems with time delay. If the time delay is not explicitly included in the controller design, instability may occur.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1286-1294
• /
• 2015

Capacitor current feedback active damping is extensively used in grid-connected converters with an LCL filter. However, systems tends to become unstable when the digital control delay is taken into account, especially in low switching frequencies. This paper discusses this issue by deriving a discrete model with a digital control delay and by presenting the stable region of an active damping loop from high to low switching frequencies. In order to overcome the disadvantage of capacitor current feedback active damping, this paper proposes a modified approach using grid current and converter current for feedback. This can expand the stable region and provide sufficient active damping whether in high or low switching frequencies. By applying the modified approach, the active damping loop can be simplified from fourth-order into second-order, and the design of the grid current loop can be simplified. The modified approach can work well when the grid impedance varies. Both the active damping performance and the dynamic performance of the current loop are verified by simulations and experimental results.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1631-1633
• /
• 2001

In manufacturing processes, various and suitable pulse shapes are required for the purpose of material processing and the pulseshape is regarded as a dominant factor due to the specific property of processing materials. Therefore, in this study, a variable pulse width, high duty cycle Pulse Forming Network(PFN) is constructed by time sequently. The power supply for this experiment consists of three switching circuits. The PFN elements operate at low voltage and drive the primary of HV leakage transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence of properly phased and nested increments. We investigated laser pulse width as various delay time among three switching circuit. As a result, we tan obtain various laser pulse width from about 4ms to 10ms. The maximum laser pulse width obtained at this experiment was about 10ms at delay time of 4ms among each switching circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.883-891
• /
• 2009

This paper proposes Ethernet linear protection switching technology in order to provide the SONET/SDH-like resiliency over Metro Ethernet Networks. The proposed design is made of an architecture with a control processor board and several data processing boards, where the control processor board is independent of data processing board, providing a flexible solution for carrier Ethernet system. However, it leads an increasing message delay between inter-processors. In this paper, we implement and confirm a restoration of failed transport connections withing 50 millisecond in spite of increasing message delay between the control processing board and data processing board providing carrier-class network survivability.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.551-555
• /
• 2011

Optical packet switching is a promising technology, which can integrate both data and optical network. In this paper, we present a comparative study of various traffic arrival approaches in WDM packet switches. The comparison is made based on packet loss rate and average delay under uniform and self-similar Pareto traffic. Computer simulations are performed in order to obtain the switch performance metrics. Study shows that burstiness of data traffic has a strong negative impact in the performance of WDM packet switches.

• International Journal of Reliability and Applications
• /
• v.16 no.2
• /
• pp.99-111
• /
• 2015

In this paper, we study the reliability analysis of a repairable system with two types of failure in which switching failures and reboot delay are considered. Let units in this system be cold standby, and failure rate and repair rate of [type1, type2] components be exponentially distributed. The expressions of reliability characteristics - such as the system reliability and the mean time to system failure MTTF - are derived. We use several cases to graphically analyze the effect of various system parameters on the system reliability and MTTF. We also perform a sensitivity analysis of the reliability characteristics with changes in specific values of the system's parameters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.5
• /
• pp.401-406
• /
• 2012

This paper considers multi-agent systems with interval time-varying delays and switching interconnection topology. By construction of a suitable Lyapunov-Krasovskii's functional, new delay-dependent consensus control conditions for the systems are established in terms of LMIs (Linear Matrix Inequalities) which can be easily solved by various effective optimization algorithms. One numerical example is given to illustrate the effectiveness of the proposed methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1985-1991
• /
• 1999

In this paper, complete and general two-port lumped Spice-network model is developed for a lossy transmission line. This model is realized as a Spice subcircuit, by means of standard lumped network elements and mathematical functions. It is used as a component in the time-domain simulation of a high-speed data transmission line such as IMI(Inter Module Interface) data path in HANbit ACE 64 ATM switching system. The only required Spice network elements are resistance and frequency-dependent controlled-voltage sources. Such frequency-dependent sources are realized by utilizing the standard Hspice mathematical functions FREQ, DELAY, and POLY.