• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.73-77
• /
• 2012

Operation of liquid crystal displays (LCDs) can be improved by monolithic integration of the pixel transistors with light emitting diodes (LEDs) on a single substrate. Conventional LCDs make use of filters to control the backlighting which reduces the overall efficiency. These LCDs also utilize LEDs in series which impose failure and they require high voltage for operation with a power factor correction. The screen of small hand-held devices can operate from moderate brightness. Therefore, III-V nanowires that are grown along with transistors over Silicon substrates can be utilized. Control of nanowire LEDs with nanowire transistors will significantly lower the cost, increase the efficiency, improve the manufacturing yield and simplify the structure of the small displays that are used in portable devices. The steps to grow nanowires on Silicon substrates are described. The vertical n-type and p-type nanowire transistors with surrounding gate structures are characterized. While biased at 0.5 V, nanowire transistors with minimum radius or channel width have an OFF current which is less than 1pA, an ON current more than 1 ${\mu}A$, a total delay less than 10 ps and a transconductance gain of more than 10 ${\mu}A/V$. The low power and fast switching characteristics of the nanowire transistor make them an ideal choice for the realization of future displays of portable devices with long battery lifetime.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.1
• /
• pp.26-32
• /
• 2005

Rotor position information is essential in the operation of the switched reluctance motor(SRM) drive for generation the phase current switching signals. When an incremental encoder is used as a rotor position sensor, the initial rotor position can not be detected. Some sensorless rotor position estimation methods also have the same problem. In these systems, to initially align the rotor, the forced alignment method has a delay and reverse rotation before the motor can start. Therefore it can not be acceptable for unidirectional drive systems. So the forced alignment method is not desirable in all drive systems and the research on the SRM drives should be directed to a system without rotor alignment. In this paper, a new detection method of initial rotor position using the rate of change of current is suggested. Firstly, di/dt versus θ/sub R/ reference table, which is the relation between the rate of change of current and rotor position, is generated and then the squared Euclidean distance method is used to estimate the rotor position based on the table. The simulated and experimental results are presented demonstrating the feasibility and accuracy of this method.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1753-1765
• /
• 2000

As the areas of computer application are expanded, real-time application environments that must process as many transactions as possible within their deadlines, such as a stock transaction systems, ATM switching systems etc, have been increased recently. The reason why the conventional database systems can't process soft real-time applications is the lack of prediction and poor performance on processing transaction's deadline. If transactions want to access data stored at the secondary storage, they can not satisfy requirements of real-time applications because of the disk delay time. This paper designs a main-memory database prototype systems to be suitable to real-time applications and then this system can produce rapid results without disk i/o as all of the information are loaded in main memory database. In thesis proposed the improved techniques with respect to logging, checkpointing, and recovering in our environment. In order to improve the performance of the system, a) the frequency of log analysis and redo processing is reduced by the proposed redo technique at system failure, b) database consistency is maintained by improved fuzzy checkpointing. The performance model is proposed which consists of two parts. The first part evaluates log processing time for recovery and compares with other research activities. The second part examines checkpointing behavior.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.71-77
• /
• 2008

This paper proposes an Electronic Throttle Body (ETB) model considering a non-linearity of DC motor driver which is integrated with a H-bridge and a gate driver. A propagation delay and reverse recovery time of switching components cause non-linear characteristic of DC motor driver. This non-linearity affects not only the amateur voltage of DC motor, but also entire behaviour and parameters of ETB. In order to analyze the behavior of ETB more accurately, this non-linear effect of DC motor driver is modeled. The developed ETB model is validated by use of the step response and ramp response experiments, and it shows relatively accurate results compared with linear DC motor driver model.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.226-230
• /
• 2007

This paper proposes a local scheduling method based on user pattern for Volunteer computing project, Korea@Home. It enables Korea@Home participants to run the agent without disturbance. It is devised to prevent user's application from delay while running the agent and decreases the frequency of switching resource between the user and the agent. We analyze the user's patterns of donating computing resource with Korea@Home which is a representative volunteer computing project in Korea. It has contributed the computing power to several applications including climate prediction and virtual screening. It promotes the volunteers to participate continuously without disturbance and increases the potential computing power with non-disturbance scheduling based on user usage pattern for Volunteer Computing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.222-230
• /
• 1998

This paper proposes a new gate drive circuit for high power IGBTs which can reduce the harmful effect of reverse recovery current at turn-on and actively suppress the overvoltage across the driven IGBT at turn-off without a snubber circuit. The turn-on scheme decreases the rising rate of the collector current by inereasing the input capacitance at turn-on transient when the gate-emitter voltage goes above threshold voltage. It results in soft transient of the reverse recovery current with no variation in turn-on delay time. The turn-off driving scheme has adaptive feature to the amplitude of collector current, so that the overvoltage can be limited much effectively at the fault collector current. Experimental results under various normal and fault conditions prove the effectiveness of the proposed circuit.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.111-117
• /
• 1998

This paper presents a polarity changing method without dead time of a cycloconverter with an LC resonant circuit. According to the proposed method, dead time to prevent short circuit for the polarity changing is not required. Therefore the delay of control and the harmonic components of output currents can be decreased. And the proposed method can be expanded for the other natural commutated cycloconverters of noncirculating current type. In this paper, the switching method of the proposed polarity changing without dead time is studied, and in order to confirm the validity of the proposed method the experiment is carried out with a cycloconverter with an LC resonant circuit.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.65-71
• /
• 1984

The design formular of optical focusing systems cannot be applied to ultrasonic B scanners, which use broadband pulses instead of continuous wave. In this paper, a calculation method is studied for analyzing the propagation of ultrasonic broadband pulse excited by ultrasonic array transducers. Using the results, seveial design parameters such as the number of transducer elements, delay time, and the focal point are determined to obtain high resolution in the ultrasonic dynamic focusing system. A dynamic focusing system with low-noise switching characteristics; which attains lateral resolution of 2-3mm all along the axial direction up to 18 cm with a 3.5 MHz linear array transducer, was implemented.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.622-634
• /
• 2013

The circuit level implementation of nanoscale Insulated Shallow Extension Silicon On Nothing (ISE-SON) MOSFET has been investigated and compared with the other conventional devices i.e. Insulated Shallow Extension (ISE) and Silicon On Nothing (SON) using the ATLAS 3D device simulator. It can be observed that ISE-SON based inverter shows better performance in terms of Voltage Transfer Characteristics, noise margin, switching current, inverter gain and propagation delay. The reliability issues of the various devices in terms of supply voltage, temperature and channel length variation has also been studied in the present work. Logic circuits (such as NAND and NOR gate) and ring oscillator are also implemented using different architectures to illustrate the capabilities of ISE-SON architecture for high speed logic circuits as compared to other devices. Results also illustrates that ISE-SON is much more temperature resistant than SON and ISE MOSFET. Hence, ISE-SON enables more aggressive device scaling for low-voltage applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.1-6
• /
• 2016

As IPTV has become one of the major Internet services, IPTV users and channels increase rapidly. However, the increased number of channels makes users difficult to find their desired channels. Along with this, the channel switching time of IPTV incurs serious user-perceived delay. To alleviate these problems, this paper presents hybrid schemes that combine channel prefetching and reordering schemes. Simulation experiments show that combining adjacency based prefetching and popular channel reordering reduces the channel seek time by up to 44.7% in comparison with the conventional channel seeking interfaces.