• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.24-33
• /
• 2019

A new modeling method for AC-AC switched capacitor converters (SCCs) is introduced in this study. The proposed analytical method aims to accurately describe the input-output characteristics of AC-AC SCCs and establish a mathematical model for static voltage conversion ratio and equivalent resistance, which are key performance metrics for SCCs. A quantitative analysis of converter regulation capability is addressed on the basis of the modeling method. In this analysis, the effects of the control parameters and individual components on SCCs are illustrated extensively. Component stresses, such as the peak value and transient variation of the voltage/current of the converter, are also presented. The effectiveness of the proposed method is verified by comparing it with the existing modeling method and applying it to an AC-AC SCC with a conversion ratio of three. Two 1 kW prototypes are built in a laboratory, and their experimental results exhibit good agreement with the theoretical analysis.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.437-443
• /
• 2013

This paper was developed a monitoring and control system to use reactive power control algorithm. This algorithm could be improved voltage stability in power system. This method was controlled the voltage for stability improvement, effective usage of reactive power, and the increase of the power quality. PMS(Power Management System) has been calculate voltage sensitivity, and control reactive power compensation device. The voltage control was used to the FACTS, MSC/MSR(Mechanically Switched Capacitors/Reactors), and tap of transformer in power system. The reactive power devices in power system were control by voltage sensitivity ranking of each bus. Also, to secure momentary reactive power, it had been controlled as the rest of reactive power in the each bus. In here, reactive power has been MSC/MSR. The simulation result, First control was voltage control as fast response control of FACTS. Second control was voltage control through the necessary reactive power calculation as slow response control of MSR/MSR. Third control was secured momentary reactive reserve power. This control was method by cooperative control between FACTS and MSR/MSC. Therefore, the proposed algorithm was had been secured the suitable reactive reserve power in power system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권4호
• /
• pp.161-169
• /
• 2003

The applications of SRM(Switched Reluctance motor) are dramatically increasing due to a simple mechanical structure, a high efficiency and a high speed drive characteristics. Energy recovery in the regenerative region is very important when SRM is used in traction drive. This is to reduce energy loss during mechanical braking and/or to have a high efficiency drive. To control excitation voltage during motoring and regenerating voltage in the generator operation in the SRM, multi-level voltage control is effective. This paper suggests multi-level inverter which is useful for motoring and regenerative operation. The proposed method is verified through simulations and experiments.

• 전기학회논문지P
• /
• 제51권1호
• /
• pp.10-17
• /
• 2002

Due to the development of information communication field, the interest of the SMPS(Switched Mode Power Supply) is increased. The size and weight of SMPS are decided by inductor, capacitor and transformer. Thus, the low loss converter which is operated in high speed switching is required. The resonant FB DC-DC converter is able to operate in high speed switching and apply to high power field because the switching loss is low. In this thesis, it is proposed to control strategy for constant output power of resonant FB DC-DC converter in variable input voltage. The proposed control system is a digital I-PD type control and apply to phase-shift resonant type controller. The output voltage tracks reference without steady state error in variable input voltage. The validity of proposed control strategy is verified from results of simulation and experiment.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.161-161
• /
• 2003

The applications of SRM(Switched Reluctance motor) are dramatically increasing due to a simple mechanical structure, a high efficiency and a high speed drive characteristics. Energy recovery in the regenerative region is very important when SRM is used in traction drive. This is to reduce energy loss during mechanical braking and/or to have a high efficiency drive. To control excitation voltage during motoring and regenerating voltage in the generator operation in the SRM, multi-level voltage control is effective. This paper suggests multi-level inverter which is useful for motoring and regenerative operation. The proposed method is verified through simulations and experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.454-459
• /
• 1997

The good features of a switched reluctance motor(SRM) are appreciated by the appliance manufactures. And it is spread into a commercial and industries market. The few disadvantage of the motor is higher torque ripple and noise. This paper proposes an instantaneous torque control scheme to control a speed precisely. It adapts phase-locked loop (PLL) technique to control speed precisely. In this control scheme, the phase detector signal of the PLL regulates the switching dwell angle flexibly and the loop filter's signal controls adaptively the instantaneous switching voltage. Experimental results show that drive performance is good with low torque ripple.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.472-481
• /
• 2002

본 논문은 SRG(Switched Reluctance Generator)의 제어를 위하여 순시자속을 이용하여 위치를 추정하고, 추정한 위치에 근거하여 출력전압을 제어하는 방법이 제안되었다. SRG를 제어하기 위해서는 정확한 회전자의 위치정보가 필수적이다. 이러한 위치정보는 일반적으로 엔코더나 레졸버와 같은 정밀한 위치센서로부터 얻어진다. 그러나, 전자기적 간섭(Electromagnetic Interference), 진동, 열, 습도 등의 열악한 환경으로 인하여 정확한 위치를 검출하는데 많은 문제점을 가지고 있다. 따라서 이러한 문제점을 극복하기 위하여 위치·속도센서 없는 SRG의 제어기가 요구되어 진다. 본 논문에서는 SRG를 위한 새로운 위치·속도의 실시간 추정방법이 제안되었다. 순시자속은 측정한 전압과 전류에 의해 계산한 것과 위치와 자속 프로파일로부터 회전자의 위치를 추정하였다. 출력전압은 PID 제어 알고리즘에 의해 일정 제어되었다. 제안된 방법은 시뮬레이션을 통하여 확인하였고, DSP를 적용하여 구현하였다. 실험을 통하여 제안된 방법은 부하가 변동하더라도 일정하게 출력전압을 유지하고, SRG 제어가 안정됨을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2070-2072
• /
• 2002

In this paper, advance angle control is described to drive an industrial low voltage SRM(Switched reluctance motor) for a forklift truck by changing velocity and torque. The high current SRM is designed and its phase resistance and phase inductance are very low to inject high current into the phase windings. In this reason, the current has to be built up in the increasing phase inductance part as soon as possible. Therefore, the phase switch must be turned on before the phase inductance increases, and this angle is called as the advance angle. We analyze the changes of the advance angle as its torque and velocity are changed in the real SRM driving experiment. And we propose the way to improve the SRM performance by using the advance angle control.

• 전력전자학회논문지
• /
• 제5권4호
• /
• pp.343-351
• /
• 2000

본 논문에서는 정렬과 비정렬된 회전자 위치들에서 자화곡선들을 기본으로 한 SRM의 회전자 워치펑가 알고리즘을 제안한다. 자화곡선은 측정된 상 전압과 상 전류로부터 계산되어지고, 계산된 데이타는 회전자 위치검출을 위한 자화곡선의 입력으로 사용되어진다. 자화곡선은 비션형 특성해석에 적합한 퍼지 알고리즘으로 구생되어졌다. 종래의 지삭기반 퍼지제어기를 이용한 자속관측기가 SRM의 센서리스 제어를 얻기 위해 제시되었다. 최적 각을 선정하기 위한 방식이 회전자 위치검출을 위해 제시되었다. 제안된 알고리즘의 강인성이 시뮬레이션과 실험결과의 비교를 통해 입증되었다.

• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.743-750
• /
• 2011

This article deals with the sensor-less control of a DC Motor via a SEPIC Converter-Full Bridge combination powered through solar panels. We simultaneously regulate, both, the output voltage of the SEPIC-converter to a value larger than the solar panel output voltage, and the shaft angular velocity, in any of the turning senses, so that it tracks a pre-specified constant reference. The main result of our proposed control scheme is an efficient linear controller obtained via Lyapunov. This controller is based on measurements of the converter currents and voltages, and the DC motor armature current. The control law is derived using an exact stabilization error dynamics model, from which a static linear passive feedback control law is derived. All values of the constant references are parameterized in terms of the equilibrium point of the multivariable system: the SEPIC converter desired output voltage, the solar panel output voltage at its Maximun Power Point (MPP), and the DC motor desired constant angular velocity. The switched control realization of the designed average continuous feedback control law is accomplished by means of a, discrete-valued, Pulse Width Modulation (PWM). Experimental results are presented demonstrating the viability of our proposal.