• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.154-161
• /
• 2011

This paper presents a compact integrated transceiver module for 2.4 GHz band applications using Low Temperature Co-fired Ceramic(LTCC) technology. The implemented transceiver module is divided into an RF Front-End Module (FEM) part and a transceiver IC chip part. The RF FEM part except an SPDT switch and DC block capacitors is fully embedded in the LTCC substrate. The fabricated RF FEM has 8 pattern layers and it occupies less than $3.3\;mm{\times}5.2\;mm{\times}0.4\;mm$. The measured results of the implemented RF FEM are in good agreement with the simulated results. The transceiver IC chip part consists of signal line, power line and transceiver IC for 2.4 GHz band communication system. The fabricated transceiver module has 9 layers including three inner grounds and it occupies less than $12\;mm{\times}8.0\;mm{\times}1.1\;mm$. The implemented transceiver module provides an output power of 18.1 dBm and a sensitivity of -85 dBm.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.100-110
• /
• 2001

In this paper, we investigated several buffer management schemes for the design of shared-memory type ATM switches, which can enhance the utilization of switch resources and can support quality-of-service (QoS) functionalities. Our results show that dynamic threshold (DT) scheme demonstrate a moderate degree of robustness close to pushout(PO) scheme, which is known to be impractical in the perspective of hardware implementation, under various traffic conditions such as traffic loads, burstyness of incoming traffic, and load non-uniformity across output ports. Next, we considered buffer management strategies to support QoS functions, which utilize parameter values obtained via connection admission control (CAC) procedures to set tile threshold values. Through simulations, we showed that the buffer management schemes adopted behave well in the sense that they can protect regulated traffic from unregulated cell traffic in allocating buffer space. In particular, it was observed that dynamic partitioning is superior in terms of QoS support than virtual partitioning.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.117-125
• /
• 2007

Recently, a fuel cell with low voltage and high current output characteristics is remarkable for new generation system. It needs both a DC-DC step-up converter and DC-AC inverter to be used in fuel cell generation system. Therefor, this paper, consists of an isolated DC-DC converter to boost the fuel cell voltage 380[VDC] and a PWM inverter with LC filter to convent the DC voltage to single-phase 220[VAC]. Expressly, The fuel cell system which it proposes DC-DC the efficient converter used PWM the phase transient control law and it depended to portion resonance ZVS switching, loss peek voltage and electric current of realization under make schedule, switching frequency anger and the switch reduction. And mind benevolence it sprouted 2 in stop circuit and it added and a direct current voltage and the electric current where the ingredient is reduced in load side ripple stable under make whom it will be able to supply. Besides the efficiency of 92[%]is obtained over the wide output voltage regulation ranges and load variations. Also, under make over together the result leads simulation and test, the propriety confirmation.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.63-72
• /
• 2007

This paper introduces a load-balancing algorithm focusing on distributing web requests evenly into the web cluster servers. The load-balancing algorithms based on conventional periodic load-information update mechanism are not suitable for dynamic page applications, which are common in Cyber Foraging services, due to the problems caused by periodic synchronized load-information updating and the difficulties of work load estimation caused by embedded executing scripts of dynamic pages. Update-on-Finish algorithm solves this problem by using non-periodic load-update mechanism, and the web switch knows the servers' real load information only after their reporting and then distributes new loads according to the new load-information table, however it results in much communication overhead. Our proposed mechanism improve update-on-finish algorithm by using K-Percents-Finish mechanism and thus largely reduce the communication overhead. Furthermore, we consider the different capabilities of servers with a threshold Ti value and propose a load-balancing algorithm for servers with various capabilities. Simulation results show that the proposed K-Percents-Finish Reporting mechanism can at least reduce 50% communication overhead than update-on-finish approach while sustaining better load balancing performance than periodic mechanisms in related work.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.439-446
• /
• 2015

The turnout system, which determines the direction of the train, is not only a key system but also a vulnerable system. Failure of this system may lead to a delay of the train or even casualties. In this light, it is necessary to precisely the conditions of the turnout system. Currently, ROADMASTER of Germany is used as a diagnostic system in Korea. However, a new diagnostic system should be developed for optimized operation of the turnout system with maintenance that is suitable for the Korean railway environment. In this paper, a Fault Tree Analysis for the representative faults of the turnout system is conducted and physical quantities, which can be the cause of the fault, are classified according to the component and function. Also, the measuring factors for the monitoring are derived and a decision making theory is suggested. On the basis of the results, we propose a new turnout diagnostic system that can provide more driverse and precise information than the conventional system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.1
• /
• pp.55-62
• /
• 2007

Radical paring of the cleft edge during primary cleft lip operation or repeated secondary surgeries can result in tightness of the upper lip. In case, the degree of the resulting side-to-side tension is very severe, the possibility of a lip switch flap must be considered. When the lip tightness accompanies a loss of more than two-thirds of the Cupid's bow, an Abbe flap is an alternative. The disadvantages of Abbe flap are scar formation on the lower lip, design of incision line on the upper lip, disharmony of colors, and the dysfunction of the orbicularis muscle. These problems have been recognized in the literature and extreme discretion has been advised in its application. We experienced four cases of Abbe flap operation which were designed differently to correct the secondary unilateral or bilateral cleft-lip nasal deformities. The Abbe flap operations resulted in removal of the scars and tightness of the upper lip, reconstruction of the Cupid's bow, lengthening of the columella, and therefore secondary cleft-lip nasal deformity could be corrected. It is thought that carefully applied Abbe flap is an appropriate method to relieve horizontal tightness or flattening of the upper lip which occured after primary operation of cleft lip.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.127-137
• /
• 2017

The role of smartphones is changing from a communication system for exchanging calls and information into a universal platform for cultural services. Also, satisfaction for mobile application services on smartphones is a very important factor in the smart business. In This paper, we analyze the effects of the outcome, service scape, costs, and especially the impact of whether costumers having to pay or free for the app on customer satisfaction. For this purpose, we analyzed survey data on service quality of mobile app service from Chinese mobile app service users. We also analyzed the moderating effects of paid and free mobile app services. As a result, it was confirmed that the quality, servicescape quality and cost of mobile app service that customers perceive have a positive effect on customer satisfaction. In addition, the effect of the cost of mobile app service perceived by the customer on customer satisfaction showed that free mobile app service was more significant than paid mobile app service. This paper can be used as an alternative to monetization for providing a mobile app service provider or a mobile app service provider who wants to switch mobile app service from free to paid service.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.169-180
• /
• 2017

China's mobile communication market has been growing quantitatively and qualitatively since 2000. Currently, it has secured 1.27 billion mobile subscribers and many of the Korean companies try to enter the Chinese market and cooperation with companies in China is being held. Thus understanding of the Chinese markets is the key to better prepare for future international competition. This study is to identify factors affecting switching intentions and behaviors for Chinese mobile subscribers to other mobile service providers by the PPM and it is to derive correlations between strategies of mobile service providers and users' switching intention by the groups classified by ARPU. We conducted a survey targeting 270 Chinese mobile users and analyze it by using Smart PLS 2.0. In conclusion, push effects have positive influence on intention to switching and relational switching cost among mooring effect have significantly negative influence on intention to switching In particular, intention to switching depending on the groups classified by a level of their ARPU have been shown as significantly different. This study will extend theoretical range of PPM theory in explaining users' switching behaviors and contribute to establish strategies to enter the chinese market.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.127-133
• /
• 2014

In order to protect information asset from various malicious code, Honeypot system is implemented. Honeypot system is designed to elicit attacks so that internal system is not attacked or it is designed to collect malicious code information. However, existing honeypot system is designed for the purpose of collecting information, so it is designed to induce inflows of attackers positively by establishing disguised server or disguised client server and by providing disguised contents. In case of establishing disguised server, it should reinstall hardware in a cycle of one year because of frequent disk input and output. In case of establishing disguised client server, it has operating problem such as procuring professional labor force because it has a limit to automize the analysis of acquired information. To solve and supplement operating problem and previous problem of honeypot's hardware, this thesis suggested hybrid honeypot. Suggested hybrid honeypot has honeywall, analyzed server and combined console and it processes by categorizing attacking types into two types. It is designed that disguise (inducement) and false response (emulation) are connected to common switch area to operate high level interaction server, which is type 1 and low level interaction server, which is type 2. This hybrid honeypot operates low level honeypot and high level honeypot. Analysis server converts hacking types into hash value and separates it into correlation analysis algorithm and sends it to honeywall. Integrated monitoring console implements continuous monitoring, so it is expected that not only analyzing information about recent hacking method and attacking tool but also it provides effects of anticipative security response.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.57-70
• /
• 2009

According to the change of the traffic conditions, the requirement of controlling the separated left(or right) turn, the median bus lane and bicycle signal is increasing. However, the traffic signal controller standard based on the four-set lights restricts to control the three-set lights which control the separated direction and kind of traffics. This study suggests the method to control the three-set lights signal by improving the hardware and software for the traffic signal controller which is operated currently in the traffic scene. The 6 output ports of Load Signal Unit(LSU) which is consisted of Pedestrian Red, Pedestrian Green, Red, Yellow, Arrow and Green signal reconstitute 2 rows of the Red, Yellow, Green for three-set lights while the Signal Map data's code values which control the signal step of an individual Ring and LSU are established to adjust the LSU's output ports(R1 Y1 G1 R2 Y2 G2) of the three-set lights. The effect of using the separated through/left turn and the median lane bus signal of three-set lights is analyzed from a Mangwoo intersection in Seoul. The results of analysis show that the delay time of the east-west direction where the median bus lane is operated is especially improved with over 70 sec/veh.