• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1356-1361
• /
• 2008

A switched reluctance generator(SRG) has simple magnetic structure, and needs simple power electronic driving circuit. But, a SRG are no windings or permanent magnets on the rotor, and there are concentrated windings placed around each salient pole on the stator. Because of the characteristics of time-sharing excitation, the control of SRG is very flexible. And there are several parameters for controlling SRG, such as switch turn-on angle, switch turn-off angle, and exciting voltage and controlling mode, all these will affect the generation greatly. A SRG has positive torque at increasing inductance region and negative torque at decreasing inductance region. In this paper, we studied characteristics about the switch turn-on and off angles according to switch method for constant output voltage of the fixed speed SRG. It is the acoustic noise and torque ripple characteristics. Characteristics for a switch angle and method are presented by experiment using a 50W SRG with 12/8 poles.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.130-133
• /
• 1998

A imput buffer typed ATM switch and an appropriate cell-scheduling algorithm are necessary for avoiding output blocking and internal blocking respectively. The algorithm determining a set of non-blocking data cells from the queues can greatly affect on the switch's throughput as well as the behavior of the queues. In this paper bit pattern optimization combined with the Token method in presented in order to improve the performance of ATM switch. The digital Hopfield neural cell scheduler is designed and used for the maximum numbers of cells in real-time

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.8
• /
• pp.45-55
• /
• 1997

To design a ATM Switch which ahs advantages in high sped packet switching, it is essential to set multiple paths between input ports and output ports and to design a new packet transfer technique on that paths for decreasing Packet Loss by conflicts in internal Switch Plane. We propose new packet transfer method, Alternate Path Transfer Mechanism by Dynamic Bypass Transfer Method which can solve conflict problem in Banyan network easily. Proposed ATM Switch consists of Banyan networks, Input/Ouput Port, Bypass Link, and Bypass Link Controller. Packets caused conflicts in SEs have another chances of packet transfer over alternate switching planes by using this mechanism.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.116-120
• /
• 2013

This paper proposes a novel RF MEMS dc-contact switch with stiff membrane on a quartz substrate. The uniqueness of this work lies in the utilization of a seesaw mechanism to restore the movable part to its rest position. The switching action is done by using separate pull-down and pull-up electrodes, and hence operation of the switch does not rely on the elastic recovery force of the membrane. One of the main problems faced by electrostatically actuated MEMS switches is the high operational voltages, which results from bending of the membrane, due to internal stress gradient. This is resolved by using a stiff and thick membrane. This membrane consists of flexible meanders, for easy movement between the two states. The device operates with an actuation voltage of 6.43 V, an insertion loss of -0.047 dB and isolation of -51.82 dB at 2 GHz.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.132-138
• /
• 2005

In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.1
• /
• pp.9-21
• /
• 2017

Objective: The objective of this study is to understand the effect of angle and curvature of push-return switches, which are external factors in the operation environment inside the cars, on the feel of operation and to propose optimum alternatives. Background: Customers' needs for products are changing from functional and performance aspects to customer-led type where customers can reflect on their needs on the products. The operation inside cars is executed by HMI. The push-return switch is utilized as the most intuitive mode of HMI; therefore, this push-return switch, which is widely used, has to be developed by assessing the preference and satisfaction of the customer. Method: The angle and curvatures, which are external factors that affect the feel of operation, are drawn through surveying the preceding research literatures. The stages to construct alternatives in experiments are as follows: (1) the tactile switch is replaced after dismantling the switch assembly to evaluate the internal characteristics proposed by preceding researches, (2) a drawing is prepared by using a design software, is printed using 3D printer, and then it is attached on the switch assembly, and (3) evaluation for satisfaction of operation is carried out by using a driving simulator. Results: Both the angle and curvature that are external factors of switch significantly affect the feel of operation. However, interaction between the two factors is found insignificant. Therefore, an optimum alternative is proposed considering the experimental outcomes. Conclusion: This study evaluates the satisfaction in operation that affects the feel of operation environment inside the cars. Based on the study results, a guideline for switch design in the center fascia is proposed. Application: This study is expected to be used as basic data for designing automotive switches, as well as switches in the industries similar with the operation environments of cars.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.946-949
• /
• 2001

This paper proposes a new zero-current switching (ZCS) pulse-width modulation (PWM) switch cell that has no additional conduction loss of the main switch. In this cell, the main switch and the auxiliary switch turn on and turn off under zero current condition. The diodes commutate softly and the reverse recovery problems are alleviated. The conduction loss and the current stress of the main switch are minimized, since the resonating current for the soft switching does not flow through the main switch. Based on the proposed ZCS PWM switch cell, a new family of dc to dc PWM converters is derived. The new family of ZCS PWM converters is suitable for the high power applications employing IGBTs. Among the new family of dc to dc PWM converters, a boost converter was taken as an example and has been analyzed. Design guidelines with a design example are described and verified by experimental results from the 2.5 kW prototype boost converter operating at 40kHz.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.786-797
• /
• 2016

This paper describes the design and development of a novel semiconductor-based solid-state switch for damped oscillating voltage test system. The proposed switch is configured as two identical series-connected switch stacks, each of which comprising 10 series-connected IGBT function units. Each unit consists of one IGBT, a gate driver, and an auxiliary voltage sharing circuit. A single switch stack can block 20 kV-rated high voltage, and two stacks in series are proven applicable to 30 kV-rated high voltage. The turn-on speed of the switch is approximately 250 ns. A flyback topology-based power supply system with a front-end power factor correction is built for the drive circuit by loosely inductively coupling each unit with a ferrite core to the primary side of a power generator to obtain the advantages of galvanic isolation and compact size. After the simulation, measurement, and estimation of the parasitic effect on the gate driver, a prototype is assembled and tested under different operating regimes. Experimental results are presented to demonstrate the performance of the developed prototype.

• International Commerce and Information Review
• /
• v.6 no.1
• /
• pp.157-189
• /
• 2004

Recently, Digital Switch has risen as one of the important issues on which academic and industrial world focus in order to bring organizational transformation to a company that wants to adapt itself to the rapidly changing business environment. However, the discussion in the Digital Switch has been so much concentrated in the study of each static system, model of their performance and the development of monitoring each of them, that only few theoretical research has been carried out on the dynamic process of how each system in the organization experienced the change in terms of the level of digital transformation that can occur in the whole organization facing the change of digital environment. Therefore this thesis aims to develop a new model & strategy of switching to global digital by OEM companies in Jeonlabuk-do that enables us to check out and predict the Digital Switch progress. This model is the first Digital Switch process evaluation intended for empirical study, especially by integrating the many indices that have not been examined empirically by the existing studies. We expect that the results from this research will help corporate e-business strategy planners to devise and analyze the Digital Switch strategies effectively by recognizing the companies' current situation in comparison with their previous and other firms' level, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.710-713
• /
• 2004

The design, simulation, modeling and measurement of a low temperature co-fired ceramic (LTCC) RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a Rx/Tx switching circuit and integrated low pass filter. The low pass filter function was designed to operate in th GSM band. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ nm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.