• The Research Journal of the Costume Culture
• /
• v.26 no.1
• /
• pp.56-72
• /
• 2018

In recent years, there has been increasing interest in the senior people in our aging society. This paper will give an account of the current cases of senior shift. The first section of this paper will examine a conceptual approach based on a literature review and analyze case studies of senior shifts by national fashion and beauty brands. It will be helpful for the 'New Senior' consumer group, which in emerging in an aging society. The research methods applied were a literature review and a case study, and a database search was conducted to determine the current situation of global brands. The results of the literature review showed that seniors can be classified into four types based on their physical aging condition and emotional tendency: Prime Senior, Smart Senior, Rational Senior, and Slump Senior. The first thing that needs to be said is that the Prime Senior type is found commonly in as a way to appoint a senior model in order to switch brand image. Cases of the Smart Senior type appeared only in the beauty field, which attempted multilateral approaches such as launching products exclusively for seniors and offering make-up services after improving the usability and functionality in response to senior consumers'needs. However, as no cases of senior shift were found for the Rational Senior and Slump Senior types in either the fashion or beauty field, future studies should explore the market approaches used in those categories.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.184-192
• /
• 2001

In this paper, we analyze the result of the conduced emission and susceptibility tests performed on the KOMPSAT-I ETB Platform. The ETB platform consists of the EM (Engineering Model) boxes developed to perform the electrical functional test. During the conducted emission test, we measured the instant waveform in time domain when each switch was turn on, and spectrum of the noise in the frequency range of 10 Hz up to100 MHz fur the steady state of the ETB. During the conducted susceptibility test, no malfunction and no serious damage of the electronic box were observed when a simulated noise waveform was applied to the DC power bus. The simulated waveform was obtained by adding the 6 dB-system margin to the worst case waveform measured from the conducted emission. This test was performed as co-development of the KOMPSAT-I with TRW in USA.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.48-59
• /
• 2015

In recent years, there are increasing threats of rootkits that undermine the integrity of a system by manipulating OS kernel. To cope with the rootkits, in Vigilare, the snoop-based monitoring which snoops the memory traffics of the host system was proposed. Although the previous work shows its detection capability and negligible performance loss, the problem is that the proposed design is not acceptable in recent commodity mobile application processors (APs) which have become de facto the standard computing platforms of smart devices. To mend this problem and adopt the idea of snoop-based monitoring in commercial products, in this paper, we propose a snoop-based monitor design called S-Mon, which is designed for the AP platforms. In designing S-Mon, we especially consider two design constraints in the APs which were not addressed in Vigilare; the unified memory model and the crossbar switch interconnect. Taking into account those, we derive a more realistic architecture for the snoop-based monitoring and a new hardware module, called the region controller, is also proposed. In our experiments on a simulation framework modeling a productionquality device, it is shown that our S-Mon can detect the rootkit attacks while the runtime overhead is also negligible.

• Journal of the Korean Home Economics Association
• /
• v.47 no.9
• /
• pp.101-110
• /
• 2009

The purpose of this study was to examine the effect for information load on perceived information quality and website quality, and the relationships among perceived information quality, website quality and behavioral intentions in online apparel shopping contexts. The information load theory provided the theoretical framework for this study. The research strategy employed an online experimentation using an apparel mock website. The total of 647 responses were used for data analyses. The model of the study was tested by MANOVA and SEM. The results of MANOVA revealed the effect of information load on perceived information quality and website quality. The medium level of information load was perceived as having more positive information quality and website quality as compared to the low or high level of information load. The findings of SEM revealed the positive effect of information quality on website quailty, the positive effect of website quality on WOM and willingness to pay more, and the negative effect of website quailty on willingness to switch. Online apparel retailers and website designers need to manage information quantity and quality by understanding the importance of information load.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.52-55
• /
• 2009

With the recent development of virtual reality, it has been actively investigated to develop user interfaces for immersive interaction. Immersive user interfaces improve the efficiency and the capability of information processing in the virtual environment providing various services, and provide effective interaction in the field of ubiquitous and mobile computing. In this paper, we propose an virtual reality platform "My Workspace" which renders an 3D virtual workspace by using an immersive user interface. We develop an interface that integrates an optical see-through head-mounted display, a Wii remote controller, and a helmet with infrared LEDs. It estimates the user's gaze direction in terms of horizontal and vertical angles based on the model of head movements. My Workspace expands the current 2D workspace based on monitors into the layered 3D workspace, and renders a part of 3D virtual workspace corresponding to the gaze direction. The user can arrange various tasks on the virtual workspace and switch each task by moving his head. In this paper, we will also verify the performance of the immersive user interface as well as its usefulness with the usability test.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.270-281
• /
• 2003

ETF made the RFCs of MPLS technologies for providing the QoS of ATM or Frame Relay and the flexibility&scalability of IP on the Internet services. IETF has been expanding MPLS technologies as a common control component for supporting the various switching technologies called GMPLS. Also, IETF has standardized the signaling protocols based on such technologies, such as LDP, CR-LDP and RSVP-TE. ETRI developed the MPLS system based on ATM switch in order to provide more reliable services, differentiated services and value-added services like the VPN and traffic engineering service on the Korea Public Sector network. We are planning on deploying model services and commercial services on that network. This paper explains the basic functions of LDP, design and development of LDP on our system, and compares with LDP development and operation on other MPLS systems made by Cisco, Juniper, Nortel and Riverstone. In conclusion, this paper deduces the future services and applications by LDP through these explanation and comparison.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.529-536
• /
• 2016

In this paper we proposed an unsupervised algorithm to estimate the reverberation time (RT) directly from the reverberant speech signal. For estimation process we use maximum likelihood estimation (MLE) which is a very well-known and state of the art method for estimation in the field of signal processing. All existing RT estimation methods are based on the decay rate distribution. The decay rate can be obtained either from the energy envelop decay curve analysis of noise source when it is switch off or from decay curve of impulse response of an enclosure. The analysis of a pre-existing method of reverberation time estimation is the foundation of the proposed method. In one of the state of the art method, the reverberation decay is modeled as a Laplacian distribution. In this paper, the proposed method models the reverberation decay as a Gamma distribution along with the unification of an effective technique for spotting free decay in reverberant speech. Maximum likelihood estimation technique is then used to estimate the RT from the free decays. The method was motivated by our observation that the RT of a reverberant signal when falls in specific range, then the decay rate of the signal follows Gamma distribution. Experiments are carried out on different reverberant speech signal to measure the accuracy of the suggested method. The experimental results reveal that the proposed method performs better and the accuracy is high in comparison to the state of the art method.

• Journal of Applied Reliability
• /
• v.15 no.1
• /
• pp.44-51
• /
• 2015

In this study, we propose reliability prediction of a satellite by function analysis. To do so, the intended functions of the satellite are derived from using function structure block diagram, and defined as main, sub, and detailed functions. Furthermore, in order to generate function and reliability structure table, reliability model rule, duty cycle, and types of switch are assigned to the classified functions. This study also establishes reliability block diagram and mathematical reliability models to schematize the relationship among the functions. The reliability of the classified function is estimated by calculating the failure rate of parts comprising them. Finally, we apply the proposed method to a small satellite as a case study. The result shows that the reliability for the detailed function and the sub function as well as the main function could be predicted quantitatively and accurately by the proposed approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1906-1914
• /
• 2012

In this paper, relative service differentiation in JET based optical burst-switched networks with deflection routing is presented. It differs from conventional schemes in that it tries to make the loss rate of high class bursts as low as possible while maintaining the desired proportional ratio between the high class bursts and low class bursts. Strategies applied to it are dynamic wavelength allocation and the preemption which are combined to deflection routing. With dynamic wavelength allocation, the number of wavelengths allocated to high class bursts are dynamically changed. Preemption which gives more preference to high class bursts is also applied to decrease its loss rate. To lower the loss rate, deflection routing is applied for any kind of traffic. With those strategies, the suggested scheme shows desired properties that the loss rate of high class traffic is as lowered as possible. A queueing model for the scheme is developed to approximate loss ratio and the numerical results show that the proposed scheme provisions relative service differentiation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.9
• /
• pp.401-408
• /
• 2014

This paper proposes an optimum operation method for open type ground heat exchangers. A series of TRTs and artificial heating/cooling operations were carried out while monitoring temperature in the hole of SCW. The ground temperature naturally increases with depth, but a switch between the cooling/heating mode results in a change in the distribution of ground temperature. The effect of the mode change was evaluated by performing LMTD and COMSOL multiphysics analysis for a reduced model with the depth of 150 m. As a result, in the cooling mode, the upstream operation is more efficient than the downstream operation and reduces EWT by $2.26^{\circ}C$. On the other hand, in the heating mode, the downstream operation is advantageous over the upstream operation and increases EWT by $3.19^{\circ}C$. The merit of the optimum operation will be enhanced for the typical dimension of SCW with a depth of 400~500 m. In the future, an open type ground heat exchanger system adopting the optimum operation with variation in the ground temperature will be used in practice.