• Journal of Periodontal and Implant Science
• /
• v.53 no.6
• /
• pp.406-416
• /
• 2023

Purpose: No evidence exists regarding the advantages of periodontal regeneration treatment for furcation defects using soft block bone substitutes. Therefore, this randomized controlled trial aimed to assess the clinical and radiographic outcomes of regenerative therapy using porcine-derived soft block bone substitutes (DPBM-C, test group) compared with porcine-derived particulate bone substitutes (DPBM, control group) for the treatment of severe class II furcation defects in the mandibular molar regions. Methods: Thirty-five enrolled patients (test group, n=17; control group, n=18) were available for a 12-month follow-up assessment. Clinical (probing pocket depth [PPD] and clinical attachment level [CAL]) and radiographic (vertical furcation defect; VFD) parameters were evaluated at baseline and 6 and 12 months after regenerative treatment. Early postoperative discomfort (severity and duration of pain and swelling) and wound healing outcomes (dehiscence, suppuration, abscess formation, and swelling) were also assessed 2 weeks after surgery. Results: For both treatment modalities, significant improvements in PPD, CAL, and VFD were found in the test group (PPD reduction of 4.1±3.0 mm, CAL gain of 4.4±2.9 mm, and VFD reduction of 4.1±2.5 mm) and control group (PPD reduction of 2.7±2.0 mm, CAL gain of 2.0±2.8 mm, and VFD reduction of 2.4±2.5 mm) 12 months after the regenerative treatment of furcation defects (P<0.05). However, no statistically significant differences were found in any of the measured clinical and radiographic parameters, and no significant differences were observed in any early postoperative discomfort and wound healing outcomes between the 2 groups. Conclusions: Similar to DPBM, DPBM-C showed favorable clinical and radiographic outcomes for periodontal regeneration of severe class II furcation defects in a 12-month follow-up period.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.229-235
• /
• 2012

This study was conducted to investigate the climatic factors affecting bud phenology of Pinus densiflora provenances. Data were collected from Jungseon, Chungju and Jeju plantations which were parts of the 11 provenance trials established by Korea Forest Research Institute in 1996. The 36 provenances were included in this trial ($33^{\circ}30^{\prime}{\sim}38^{\circ}08^{\prime}$ in latitude and $126^{\circ}30^{\prime}{\sim}129^{\circ}20^{\prime}$ in longitude). The bud swelling date and bud burst date of the provenances were investigated from March to May in 2004 in two-day interval. The four geographic factors and fifteen climatic factors of the test sites and provenances were considered in this study. Canonical correlation analysis was conducted to examine the major factors affecting the bud phenology. Our results suggested that the major factors affecting the timing of bud swelling and burst are the differences in latitude, longitude, extremely low temperature (during December-February), extremely high temperature (during November-February) and annual mean growing days between test plantation and provenance. The provenances with lower winter temperature than that of plantation showed the faster bud swelling and bud burst. Based on these results, the implication on the seed transfer of P. densiflora was discussed.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.88-96
• /
• 2006

The self-sealing rubber material for a fuel cell which has self-sealing ability, in case of fuel leakage, was studied. Cure characteristics, density, swelling, and surface morphology of foamed natural rubber were investigated with carbon black and with processing oil within the range of $10{\sim}30phr$. The rheological properties indicated that the value of $ts_2$ and the value of $Tc_{90}$ were increased with increasing a content of processing oil, while carbon black did not show a similar trend. A difference in density by foaming was decreased to one fifth scale compared to the initial value. According to the swelling test of foamed natural rubber in fuel C, isooctane and toluene, all the self-sealing action was finished in two minutes. From the SEM image for the surface of rubber compounding, a foaming by sodium bicarbonate was found to be unequal and consecutive foaming cell.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.11 no.1
• /
• pp.40-53
• /
• 1998

Mast cells play an important role in the pathophysiologlcal changes observed in acute cutaneous and inflammatory diseases In order to see whether Kum-Hwang-San has an influence on mast cell- mediated immediate cutaneous reactions, the author has undertaken an animal study. Ears of mice were treated with a compound 48/80 solution topically at 30 min after the cutaneous application of Kum-Hwang-San. At each point, an ear swelling response was measured with a digimatic thickness micrometer. Ear swelling response induced by compound 48/80 was significantly suppressed dose-dependently by Kum-Hwang-San 30 min before topical application as compared with that in nonapplicated control mice, and the value returned to normal levels by 120 min. Compound 48/80- induced mast cell degranulation by Kum-Hwang-San was also remarkably decreased in accordance with the suppression in ear swelling response. Kum-Hwang-San dose-dependently inhibited histamine release from the rat peritoneal mast cells activated by compound 48/80. Another way to test acute cutaneous reaction is to induce passive cutaneous anaphylactic reaction. Kum-Hwang-San significantly inhibited passive cutaneous anaphylactic reaction activated by anti-dinitrophenyl IgE on both topical application and intradermal injection. Kum-Hwang-San also inhibited histamine release from the rat peritoneal mast cells induced by anti-DNP IgE. This study provides evidence that Kum-Hwang-San will be beneficial in the treatment of acute cutaneous diseases.

• The Journal of Korean Medicine
• /
• v.16 no.1 s.29
• /
• pp.227-249
• /
• 1995

Pursuant to the Medical Product Safety Administration Guidelines for safety assessment of Korean bee vonom for herb-acupuncture, rabbits were used for skin, eye balls, subcutaneous and muscle irritation test. The results were as follows; 1. The skin irritation test of bee venom for herb-acupuncture did not produce any irritation reactions, when the skin was covered with bee venom. 2. The eye irritation test produced moderate to severe stimulating reactions, once the eye mucous membrane was contacted with bee venom. 3. The subcutaneous and muscle irritation test of bee venom showed such local inflammatory reactions as death of cells, infiltration of inflamed cells, dropsical swelling, and congestion, once injected under the skin and in the muscle. As the results of the study on bee venom for herb-acupuncture indicate that severe reactions in such tests as eye balls, subcutancous and muscle irritation exist in the laboratory, more professional caution should be taken in clinical application of the therapy. In addition, further study on subacute, chronic toxicity and allergy reactions should be pursued.

• Journal of the Korea Furniture Society
• /
• v.21 no.4
• /
• pp.284-292
• /
• 2010

This research was carried out to examine the properties of fancy cherry veneer overlaid on the PF resin bonded Meranti plywood floor, which 2.5% green tea leaf powder was applied in the UV varnishes and the adhesives for scavenging the volatile organic compounds. The results were as follows: 1. The various properties of the treated samples, such as density, moisture content, thickness swelling, bending strength(MOR), adhesion shear strength, surface abrasion, curling, cyclic delamination test with boiling water, boiling property, cold-resistance and heat resistance, acid resistance and alkali resistance, and anti-contamination property showed no significant difference between the properties of the control samples. 2.5% green tea leaf powder treated floor gave a little better results than the control for surface scratch test. 2. In case of QUV and weathering test, no difference between the treated sample and control was found. 3. The floor was discolored by adding 10% green tea leaf powder to UV coating, and the floor was also discolored to light green during by the soaking test. The color of floor was not changed up to 5% addition level.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.3
• /
• pp.131-135
• /
• 2008

This study is to establish the coating technique for synthetic mica and to prepare synthetic mica with the non-aqueous property. The surface coating of synthetic mica is prepared with stearic acid using the high speed stirrer. The characterizations for mica powders coated the stearic acid are carried out by the deposition test, XRD and SEM. The results of research could be coated the stearic acid on the mica by 1600 rpm/min at $70^{\circ}C$ for 10 min. From the observation of SEM was found that the non-aqueous property mica could obtained by mixture ratios for stearic acid and mica, the inner temperature and rotation speed of the stirrer but treated time be unrelated.

• The Journal of the Korean Society for Microbiology
• /
• v.5 no.1
• /
• pp.41-48
• /
• 1970

In order to assay one lot of the potency of tuberculin for intradermic use, four guinea pigs sensitized with heat killed M. tuberculosis were used by the method originally of the Agriculture Research Service Center(A. R. S.) and Bureau of Animal. Industry(B. A. I.) in the United. States of America in which guinea pigs were used on 21st day after sensitization. There is doubt whether the guinea pigs are sensitized or not. Therefore, this study has taken the method of Middle Brook-Dubos hemagglutination test, and observed the humoral hemagglutinating antibody in the blood. The results obtained are as follows. 1. The maximum titer of hemagglutinating antibody was demonstrated 30days after sensitizing the guinea pigs with killed tubercle bacilli. The maximum titer was continued for a period of 45 days and thereafter declined gradually. 2. The swelling and redness of the region of the sensitized guinea pigs was shown to be reached to the maximum size within 24 hours after intradermal inoculation with HCSM tuberculin and gradually reduced 96 hours after inoculation. The swelling and redness could not be detected by macro-observation after 14 days.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.202-214
• /
• 2015

Stimuli-responsive biomaterials that alter their function through sensing local molecular cues may enable technological advances in the fields of drug delivery, gene delivery, actuators, biosensors, and tissue engineering. In this research, pH-responsive hydrogel which is comprised of dimethylaminoethyl methacylate (DMAEMA) and 2-hydroxyethyl methacrylate (HEMA) was synthesized for the effective delivery of doxorubicin (Dox) to breast cancer cells. Cancer and tumor tissues show a lower extracellular pH than normal tissues. DMAEMA/HEMA hydrogels showed significant sensitivity by small pH changes and each formulation of hydrogels was examined by scanning electron microscopy, mechanical test, equilibrium mass swelling, controlled Dox release, and cytotoxicity. High swelling ratios and Dox release were obtained at low pH buffer condition, low cross-linker concentration, and high content of DMAEMA. Dox release was accelerated to 67.3% at pH 5.5 for 6-h incubation at $37^{\circ}C$, while it was limited to 13.8% at pH7.4 at the same time and temperature. Cell toxicity results to breast cancer cells indicate that pH-responsive DMAEMA/HEMA hydrogels may be used as an efficient matrix for anti-cancer drug delivery with various transporting manners. Also, pH-responsive DMAEMA/HEMA hydrogels may be useful in therapeutic treatment which is required a triggered release at low pH range such as gene delivery, ischemia, and diabetic ketoacidosis.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.580-583
• /
• 2005

The aim of this study was to prepare a hydrogels composed of alginate blended with a carboxymethyl scleroglucan (CMSC) and evaluate the feasibility of the hydrogels as a drug delivery system for a protein. The main advantage of the alginate/CMSC hydrogels is to improve a restricted drug release from alginate hydrogels. The CMSC was chemically synthesized with chloroacetic acid and confirmed using a FT-IR. The alginate/CMSC hydrogels were prepared at distinct compositions by crosslinking with calcium ions. The swelling ratios of these hydrogels increased significantly with increasing the content of CMSC. At pH 7.4, the swelling ratios of the hydrogels increased remarkably as compared to those at pH 1.2. In ovalbumin (OVA) release test, the amount of OVA released from the hydrogels showed higher as compared to those released at pH 1.2. In addition, the release of OVA was improved with increasing the content of CMSC. Thus, the alginate/CMSC hydrogels may be used as a potential system for oral delivery of protein drugs.