• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.615-626
• /
• 2021

The main objective of this study is to present a fast and reliable approach to predict the swelling potential of clay-bearing rocks. Investigations showed that there is a good correlation between the swelling potential of a rock and its desire to absorb water due to its clay content which could be measured using the "Contact Angle" test as one of the most common ways to determine the wettability. In this test, the angle between a water drop and the flat rock surface on which it rests is measured. The present method is very fast and returns repeatable results and requires minimal sample preparation. Only having a saw-cut surface of a sample with any shape is all one needs to perform this test. The logic behind this approach is that the swelling potential of a rock is a function of its mineral content and molecular structure, which are not only distributed in the bulk of the sample but also reflected on its surface. Therefore, to evaluate swelling behavior, it is not necessary to wait for a sample to get wet all the way to its "internal structure" (which, due to the low permeability of clay-bearing rocks, is very slow and time-consuming). Instead, one can have a good sense of swelling potential by studying its surface. Parametric studies on the effect of moisture content, porosity, and surface roughness on the contact angle measurements showed that using a saw-cut oven-dried sample is a convenient way to evaluate the swelling potential by this method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.369-376
• /
• 2000

Parameters that represent the characteristic of consolidation have been determined by the oedometer tests. They are varied by the process of sampling and transportation, accuracy of apparatus, process of sample trimming and the skill of engineers. Also, it is difficult to grasp what factor exert a influence on the parameters. In this study, Slurry Rowe Cell Tests were peformed to evaluate the disturbance. Using the plot of e - log p which obtained from Rowe Cell test results, we compared the swelling indexes at the stress relief and the last loading stage. With that result, we tried to presume the disturbance of the 330 oedometer tests. The plot of compression-swelling index at the stress relief considerably scattered but at the last step of load shows a correlations between them. And the plot of depth-p$\sub$c/ shows a correlation with the different swelling indexes, but not in the LL-p$\sub$c/. Consequently, it is considered that the disturbance of the consolidation tests can be presumed by the comparison of the difference of swelling index.

• Geomechanics and Engineering
• /
• v.6 no.5
• /
• pp.437-453
• /
• 2014

This paper studies the swelling and strength characteristics of unimproved and improved expansive soils in terms of the swell potential, swelling pressure, rate of secondary swelling, unconfined compressive strength and California bearing ratio (CBR). The admixtures used in this study are locally available cement and fly ash. The soils used in this study were taken from the Mae Moh power plant, Lampang Province, in northern Thailand. A conventional consolidation test apparatus was used to determine the swelling of the soil specimen. The optimum admixture contents are determined to efficiently reduce the swelling of unimproved soil. The rate of secondary swelling for unimproved soil is within the range of highly plastic montmorillonite clay, whereas the specimens improved with optimum admixture contents can be classified as non-swelling kaolinite. A soil type affects the swelling pressure. Expansive soil improvement with fly ash alone can reduce swelling percentage but cannot enhance the unconfined compressive strength and CBR. The strength and swelling characteristics can be predicted well by the swelling percentage in this study.

• Proceedings of the KSAR Conference
• /
• 2004.06a
• /
• pp.277-277
• /
• 2004

The purpose of this study was to investigate the effect of different conditions (osmolity, solution, incubation times, comparison of fresh and frozen/thawed semen and storage times) on the swelling of canine spermatozoa. Employing the hypoosmotic swelling test (HOST), the membrane integrity of spermatozoa in different solutions (sucrose, fructose, latose, Na-citrate, Na-citrate plus sucrose, Na-citrate plus fructose and Na-citrate plus lactose were 61.4%, 66.2%, 62.5%, 68.1%, 62.0%, 68.5% and 60.2%, respectively. (omitted)

• Journal of the Korean Home Economics Association
• /
• v.20 no.1
• /
• pp.47-55
• /
• 1982

1. Pasts containing 10, 12.5, 15, 17.5 and 20g of butter respectively with identical contents of flor(16.25g) and egg(50g) were prepared. 2. For the five batter samples described above, following tests were conducted. a) Hardness and adhesiveness determination by texturometry b) Light microscopic observation d) Sensory Test 3. Significant differences of hardness, adhesiveness, and viscosity among the five samples were not recognized; but 1% significant difference in volumns were recognized. The best swelling was observed for the 17.5g butter sample; those of 15g and 12.5g butter samples were identical, while those of 10g and 20g showed the lowest swelling. Generally, stirring at 60~7$0^{\circ}C$ gave the best homogenity The degree of emulsification influenced the swelling. Not only large but also small amount of butter gave undestirable swelling. Sensory test for the 15g butter sample also gave best result.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.311-317
• /
• 2003

The swelling index of clayey soil was examined by constant rate of strain(CRS) consolidation test. Four kinds of strain rate were applied during unloading. The strain rates are l/l, l/5, 1/10, l/l 5 of loading. The strain rates during loading are 0.05%/min and 0.03%/min. From the test results using standard consolidometer, the swelling indexes were much similar values in case of 1/5 or 1/10 of the strain rate during loading stage. In the relation between effective stress and excess pore water pressure ratio, it was found that the existence of cross point and the stress level can be separated into two zones according to the swelling index.

• Geotechnical Engineering
• /
• v.6 no.1
• /
• pp.15-24
• /
• 1990

This paper describes the results of study on major factors influencing time-dependent deformation behaviour of swelling shales. The study was carried out by analyzing all the swell test results available for shales from southern Ontario. Major factors studied are (1) the presence of ambient water, (2) calcite content and (3) the applied stress. The results of the study on seven shales show that the swelling of shale is associated with the formation of cracks and the absorption of water in these cracks. The magnitude of swelling potential is related linearly to the amount of absorbed water. The presence of calcite inhibits the swelling of shales studied, reducing the swelling to zero at about 30% of calcite content. All the shales studied exhibit the stress-dependent swelling behaviour, though there Is a difference in the degree of dependency.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1989.10a
• /
• pp.1.3-25
• /
• 1989

This paper describes procedures and the results of mineralogical, fabric and pore sixte analyses perforied on four shales to understand time-dependent deforiation behav iour of swell ins shales better. Mineralogical compositions of theme shales are eBtablished froi the results of X-ray diffraction snalysis and chemical analyses. The importance of the fabric in the understanding of swelling behaviour of shales is demonstrated using Scanning Electron Microscope (SRI). The change in pore sixte distribution during the process of swelling is investigated by measuring pore size distribution before and after free swell test. The results Of the Present study imply that the swelling of Shales studied is not attributed to minerals like pyritei anhydrite or swelling clay minerals. The anisotropic swelling behaviour of shales studied ray be explained by fabrics of theme shales and the difference in them. The swelling of theme shales is found to be accoipanied by increase in the volute of pores.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.335-342
• /
• 2000

In this study, the swelling characteristics of reconstituted clayey soil were investigated by STD and CRS test. The strain rate during loading was constant i.e. 0.05 %/min, 0.03 %/min and during unloading was varied in proportion to 1/1, 1/5, 1/10 and 1/15 of strain rate during loading. From this study the following conclusions were obtained; (1) There were similar values, especially, during unloading in case of 1/10 or 1/15 of strain rate during loading and the test results between STD and CRS were much to be alike. (2) The cross point of effective stress versus excess pore water pressure ratio curve, was increased during unloading, while the stress level of the cross point was decreased. The stress level can be separated into two zones according to the swelling index named Cs1 and Cs2. From the test results, the values of Cs1 were approximately constant irrespective of strain rate during unloading, but the values of Cs2 were much influenced by strain rate. (3) In CRS consolidation tests, it was found that unloading strain rate did not affect on the existence of zone.

• Reproductive and Developmental Biology
• /
• v.30 no.1
• /
• pp.71-74
• /
• 2006

Hypoosmotic swelling test (HOST) is used for evaluating the plasma membrane function and fertilizing ability in mammal spermatozoa. However, HOS solutions and experimental conditions have not been determined clearly for assessing canine spermatozoa. This study was conducted to examine the HOS solutions and assay conditions, including incubation time (30 to 120 min), storage temperature (4, 17 and $20^{\circ}C$), semen status (fresh and frozen). Maximum spermatozoal plasma membrane swelling was obtained in an 150 mOsm Na-citrate/Fructose solutions with an incubation time for 45 min. The storage temperature and semen status affected the percentage of HOS positive spermatozoa. The HOS test adapted to canine spermatozoa in this study was simple and highly consistent assay with good repeatability. The optimal condition of HOST in canine spermatozoa is an 150 mOsm Na-citrate/Fructose solutions with an incubation time for 45 min regardless of semen storage temperature and semen status.