• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.563-567
• /
• 2006

Poly(vinyl alcohol) (PVA) and gelatin (GEL) blend membranes were prepared by solution casting method under a high electric field. SEM observation of the membrane showed that gelatin rich domains were elongated and oriented to the direction of the applied electric field in PVA matrix. This can be attributed to the electrostatic emulsifying effects due to a reduction in interfacial tension. In addition, it was observed through WAXD and swelling measurements that the degree of crystallinity of membranes increased with applied electric field strength. This may be interpreted to be caused by the orientation effect of GEL domains in the blend membrane, and the self-annealing effect due to some heat generated from high electric field during casting.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.205-208
• /
• 1999

Sialolithiasis is relatively common disease of the salivary gland in the field of Oral & Maxillofacial surgery. Obstruction of salivary secretion by a sialolith can result in swelling and pain, as well as infection of the gland. The swelling is usually correlated to meals, when salivary secretion is enhanced. Sialolithiasis occurs mainly in the submandibular gland(92%) and to a lesser degree in the parotid gland(6%). The sublingual gland and the minor salivary gland are rarely affected(2%). This is a report of rare case, the authors have experienced, within the left sublingual gland and the minor salivary glands. It is multiple sialolithiasis(about 22 silaoliths) in the sublingual and the minor salivary glands which has very low incidence of sialolithiasis. The pathosis were removed using transoral sialolithotomy with sublingual sialadenectomy.

• Korean Journal of Acupuncture
• /
• v.41 no.3
• /
• pp.110-117
• /
• 2024

Objectives : The objective of this study is to report a case of a patient with a fracture of the 1st metatarsal bone, whose symptoms improved after receiving Complex Korean Medical treatment mainly focused on acupuncture. Methods : During admission treatment, the patient received 2 sessions of acupuncture treatment, 1 session of pharmacopuncture treatment, and electromoxibustion daily. To assess the patient's condition regarding the 1st metatarsal bone fracture, X-rays were performed on the affected area of the patient on a weekly basis, along with a daily follow up on the Numerical Rating Scale (NRS), degree of swelling (measured in cm via measuring tape), and the temperature of the affected area. The Foot Function Index (FFI) and Health Assessment Questionnaire (HAQ) were also used to add credibility in assessing the patient's current condition. Results : After 4 weeks of hospital admission treatment, the NRS of the pain in the affected area decreased from 4 to 1, with the night pain NRS of the affected area also being reduced from 8 to 0. There was a general improvement in the swelling and temperature of the affected area, as well as the FFI and HAQ of the patient. Conclusions : The study shows that complex Korean medical treatment can be effective in treating patients with bone fractures even without interventions involving traditional Korean herbal medicine.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.441-448
• /
• 2006

This research is the hair damage as treating a permanent wave before and after that is compared and analyzed the change of physical and mechanical properties. This is the survey of women's hair in 20 years old. On the basis of this we would like to analyze a extend of hair damage. Also, we would to show a basic data for hair damage prevention and hair improvement to keep the beautiful and healthy hair. The conclusion is as follow. : The swelling degree after the treatment was found to be greater than before permanent wave treatment. For the formational characteristics wave, untreated hair certainly had more elastic S curl wave than damaged hair in all the permanent wave treatments, and damaged hair and extremely damaged hair had less elasticity and had saggy S curl wave. The protein permanent and soft permanent wave had thicker, gorgeous, and better elastic wave than the regular permanent wave and direct heating permanent wave in all the hair condition. As the degree of damage on hair got greater, the tensile strength dramatically decreased and as the degree of damage got greater, the elongation was great as well. For treatment method, direct heating permanent wave showed the greatest effect, causing the most damage.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.496-502
• /
• 2005

This study was performed to compare the effect of external ultrasound assisted PAL(power assisted liposuction) with that of PAL alone. We performed 17 cases of liposuction from January 2003 to June 2003. For comparing both systems, we treated the right side(study group) with external ultrasound assisted PAL and the left side(control group) with PAL alone. To evaluate the difference in results between two groups, we surveyed three objective and four subjective items. Objectives were categorized as "Reduction rate of postoperative swelling", "Efficiency of suction" and "Histologic finding of aspirated fat tissue". Subjectives were also filed as "Degree of postoperative bruising", "Cannula resistance that operator felt", "Degree of postoperative pain" and "Patient's satisfaction". We assessed by questionnaire three times at 1day, 7 days and 30 days after operation. There were statistically significant differences in two of the subjective items; "Degree of postoperative pain at postoperative 1 day" and "Cannula resistance that operator felt". This study concludes that external ultrasound PAL is more effective high mobility of fat tissue and low tension of surrounding tissue. External ultrasound PAL will be more useful in case of large volume liposuction and revision procedures.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.529-538
• /
• 2003

Chitosan should be satisfied a certain Mw range for the final application, Low molecular weight chitosan(LMWC) can be acquired by depolymerizing high molecular weight starting chitosan. Using $H_2O_2$ in depolymerizing chitosan is very effective and reproducible in controlling Mw of resulting LMWC. However, $H_2O_2$ can break glycoside linkage of chitosan and oxidize some $-NH_2$ groups in chitosan. It has been reported that decrease in DA(degree of deacetylation) of LMWC prepared by $H_2O_2$. However, any quantitative data of decrease in DA has not been reported yet. In this study, DA of initial chitosan and DA of $H_2O_2$ treated chitosan were measured and the change in DA of chitosan upon $H_2O_2$ treatment were investigated. Change in DA was very different upon $H_2O_2$ treatment condition. LMWC also showed DA change upon time passage. Pre-swelling treatment of initial chitosan and low ratio of $H_2O_2$/chitosan prevented a decrease in DA significantly. Yellowing of LMWC was detected upon time passage, however, decrease in DA was minimal (around 1%).

• Archives of Plastic Surgery
• /
• v.43 no.6
• /
• pp.518-522
• /
• 2016

Background Enophthalmos may not appear immediately after trauma due to periorbital swelling in a blowout fracture, and preoperative measurements of enophthalmos cannot be used as a reliable guideline. It is important to predict the eventual final extent of enophthalmos in order to determine whether to perform surgery, and there have been several attempts to predict the degree of late enophthalmos using preoperative orbital volume. The purpose of this study is to investigate the correlation between the orbital volume ratio (OVR) with final enophthalmos and the palpebral fissure, and to find the OVR that induced 2 mm of enophthalmos in unilateral unoperated blowout fractures. Methods We retrospectively reviewed the medical records of 38 patients and divided them into 3 groups, determined by the fracture location. The relationships between the OVR and both the degree of enophthalmos and the palpebral fissure ratio (PFR) were assessed and, in particular, the OVR that induced 2 mm of enophthalmos was sought. Results Enophthalmos increased in proportion to the OVR, and there was a highly significant correlation between the increase in the OVR and the degree of enophthalmos (P<0.05). On the other hand, there was no correlation between OVR and PFR (P>0.05). The OVR that induced 2-mm enophthalmos was 112.18%. Conclusions The final degree of enophthalmos can be estimated by the preoperative measurement of OVR. Preoperative measurements of OVR can be used as quantitative values to predict the final degree of enophthalmos in pure blowout fractures.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.265-271
• /
• 2021

The pattern of the tree's internal swelling depends on many causes. Since it is difficult to detect these various causes of swelling with a general method, if the state of swelling for a long time cannot be confirmed, serious damage to the trees may occur due to enlargement of the swelling area. In the method of acquiring a tree tomography image, an impulse passing through the tree is generated by tapping the sensor with a rubber mallet, and the moving speed is recorded. In this paper, to measure cracks, cavities, and swelling due to physical damage, we developed a 3D viewer that can know the internal state of a tree using a tree cross-section image acquired from Arbotom to determine the degree of swelling inside the tree. Based on this, we tried to present data that can be referred to when surgical operation of trees is required. In order to acquire a tomographic image of a tree, 6 sensors were attached to the three Yangpala and Maple trees, and a 1 m-long tree was measured using the Arbotom program, and a 3D image was implemented through the 3D Viewer created using MATLAB. In addition to simply acquiring images, the cross-sectional length and volume of the tree were measured. In the actually produced 3D Viewer, the length of the part where the swelling of the maple tree occurred was 33.12 cm, and the swelling of the yangpala tree was measured as 21.41 cm. The volume of the maple tree was measured to be 78.832 ㎤. As a result of comparing the cross-sectional image of the Arbotom and the 3D image, the same result as the real aspect of the tree was obtained, so it can be judged that the reliability of the manufactured software is also secured, and data to be applied to the surgical tree operation through the created Viewer is provided. It is believed that the damage will be minimized.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2007

In this study, the sulfonated ion exchange fiber was synthesized by $Co^{60}\;{\gamma}-ray$ radiation-induced graft copolymerization. Degree of grafting (DG) increased with increasing the total dose and showed the highest value at 50 v/v% styrene monomer. And also, the degree of sulfonation (DS) increased with increasing the DG and reaction temperature. DS showed the maximum value at 20 min. Ion exchange capacity and swelling ratio of ion exchange fibers increased with increasing the DS and their maximum values were 4.76 meq/g and 23.5%, respectively. Ammonia adsorption increased as increasing the ammonia concentration and ion exchange capacity and remained constant over 10 cycles.