• Journal of Forest and Environmental Science
• /
• v.28 no.4
• /
• pp.268-277
• /
• 2012

Among the domestic softwoods, technical value of Pinus koraiensis small diameter logs which have comparatively low applicability was evaluated and sensitive characteristics and physical characteristics were investigated and analyzed for examining if it can be utilized as the interior decoration material. For the sensitive characteristics of Pinus koraiensis, wood figure, wood grain, wood color and odor were evaluated and for the physical characteristics, growth-ring width and latewood percentage, abrasion, density, shrinkage, swelling, absorption, roughness and hardness were evaluated. Then, the possibility to be developed as the interior decoration material was found. As the result of evaluating sensitive characteristics and physical characteristics of domestic Pinus koraiensis, wood figure, wood grain, color and scent clearly were judged to have excellent visual factor as the interior decoration material. And, physical characteristics were also judged to be excellent, so it is judged to be developed as the interior decoration material. Therefore, as the result of various forms of design pattern with domestic Pinus koraiensis small diameter logs, several patterns of interior decoration can be developed by characteristics of each side and colors of heartwood and sapwood. And, in the future, it can be applied to furniture design or interior decoration material for the proper use. Especially, it is considered to contribute to wood applying industry through the study on the quality of domestic small diameter logs which have low applicability.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.5
• /
• pp.539-547
• /
• 2015

To investigate dimensional responses of wood under dynamic temperature condition, poplar (populous euramericana Cv.) specimens, 20 mm in radial (R) and tangential (T) directions with two thicknesses of 4 and 10 mm along the grain, were exposed to cyclic temperature changes in square wave between $25^{\circ}C$ and $40^{\circ}C$ at 60% relative humidity (RH) for three different cycling periods of 6 h, 12 h and 24 h. R and T dimensional changes measured during the cycling gave the following results: 1) Transverse dimensional changes of the specimens were generally square but at an opposite phase and lagged behind the imposed temperature changes. The phase lag was inversely correlated with cycling period, but positively related to specimen thickness, while the response amplitude was directly proportional to cycling period, but in a negative correlation with specimen thickness. 2) The specimens showed swelling hysteresis behavior. The heat shrinkage coefficient (HSC) became greater as cycling period increased or specimen thickness decreased. 3) Dimensional changes of the specimens produced deformation accumulation during repeated adsorption and desorption. The deformation accumulating ratio decreased with an increase in cycling period and specimen thickness. 4) Wood suffered 1.5 times as many dimensional changes per unit temperature variation as per unit humidity variation, and this deformation behaved even more seriously under static condition.

• Geomechanics and Engineering
• /
• v.6 no.2
• /
• pp.139-151
• /
• 2014

Mudstone is a very common rock that, when in contact with water, can exhibit considerable volume change and breakdown. This behavior of mudstone is frequently encountered in geotechnical engineering and has a considerable influence on infrastructure stability. This is particularly important in the present work, which focuses on mitigating the harmful properties of mudstone. The samples studied are of Permian Age mudstone from Shandong Province, China. Modification tests using organic silicone additive material were carried out. The mechanisms of physical properties modification of mudstone were comparatively studied using corresponding test methods, and the modification mechanism of organic silicone additive material acting on mudstone was analyzed. The following conclusions were drawn. The surface texture and characters of mudstone changed dramatically, surface character turns from hydrophilic to hydrophobic after organic silicone additive material modification. The changes in the surface character indicate a reduction in the water sensitivity of mudstone. After modification, the shape of porosity and fracture of mudstone changed unremarkable, and the total and free expansion ratios decreased obviously, whereas the strength increased markedly.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.1-7
• /
• 2003

Anatomical and physical characteristics of damaged wood by forest fire and sound wood of Pinus densiflora were examined. Granular substances were found in resin canals, epithelial cells and ray parenchyma cells of damaged wood, but the other distinctive marks of wood structure in damaged wood were not observed. Damaged wood showed slightly higher relative crystallinity in outermost growth ring than sound wood. Green moisture content and water absorptions both in tangential and radial sections of damaged wood were lower than those of sound wood. There were no significant differences in shrinkage, swelling and basic density between damaged and sound woods.

• Geomechanics and Engineering
• /
• v.33 no.6
• /
• pp.625-633
• /
• 2023

The volume changes associated with moisture or suction variation in expansive soils are of geotechnical and geoenvironmental design concern. These changes can impact the performance of infrastructure projects and lightweight structures. Assessment of unsaturated function for these materials leads to better interpretation and understanding, as well as providing accurate and economic design. In this study, expansive soils from different regions of Saudi Arabia were studied for their basic properties including gradation, plasticity and shrinkage, swelling, and consolidation characteristics. The unsaturated soil functions of saturated water content, air-entry values, and residual states were determined by conducting the tests for the entire soil water characteristic curves (SWCC) using different techniques. An attempt has been made to provide a prediction model for unsaturated properties based on the basic properties of these soils. Once the profile of SWCC has been predicted the time and cost for many tests can be saved. These predictions can be utilized in practice for the application of unsaturated soil mechanics on geotechnical and geoenvironmental projects.

• Korean Journal of Animal Reproduction
• /
• v.13 no.3
• /
• pp.141-148
• /
• 1989

The effects of seeding method and optimum time for freezing embryos according to the developmental stages on embryo survival rates after rapid freezing were determined using the FDA-test. The summarized results are as follows : 1. In the rapid freezing of embryos, the sucrose added medium together with Co-seeding or non-seeding showed the FDA scores of 4.67 and 4.20, respectively, but, raffinose addition obtained FDA scores of 4.27 and 3.97. 2. The developmental stage of embryos at freezing was most critical on the survival of embryos after thawing. Higher FDA scores were obtained in the order of blastocyst stage(4.94), morula stage(3.82) and ealy stage(2.65) in sucrose added medium. The same trend was observed in the raffinose added medium with an order or 4.91, 4.47 and 2.32. 3. Microscopic study of embryo before freezing and post-thawing indicated that the embryo showed shrinkage within 5 minutes after the embryo was transfer to the freezing medium. When thawed embryo was tranfered to the dilution medium, swelling of the embryo was observed and there after it reshrank indicating the removal of cryoprotectant from the embryo. The size of the embryo recovered to the original state when it was moved into a PBS-solution.

• Journal of the Korean Home Economics Association
• /
• v.25 no.4
• /
• pp.9-18
• /
• 1987

This study is conducted to investigate the influence of addition of quarternary ammonium salt(cetyl trimethyl ammonium bromide: CTAB) when polyester(PET) fabric is treated with sodium hydroxide(NaOH), depending on experimental variables such as CTAB concentration, NaOH concentration, time & temperature, and the change in physical & chemical properties of alkaline-hydrolyzed PET fabrics depending on their weight loss. The results are as follows: 1. By adding CTAB in aqueous NaOH, the weight loss of PET fabric is increased remarkably and until the concentration of CTAB is reached at its cmc, and the higher the concentration of CTAB are, the more weight loss on PET fibrics are. 2. The addition of CTAB in aqueous NaOH is most effective at lower NaON concentration(2%) among various NaOH concentration, on increasing the amount of weight loss, while there are almost similar results through various treatment time and temperature. 3. As the amount of weight of weight loss on PET fabric is increased, the increase of void space in the PET yarn, of softness & dyeability of PET fabric and the decrease of tensile strength are found. On the other hand, the moisture regain shows a little increase by alkaline-hydrolysis on PET fabric while vertical absorption test & water retention value are not sufficiently sensitive to distinguish between the hydrophillicity of untreated and treated PET fabric. The shrinkage of PET fabric is induced by swelling in hot aqueous NaOH regardless of NaOH concentration & addition of CTAB.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.428-434
• /
• 2015

In this study, we received each wood plastic composites (WPC) from three manufacturers. These WPCs were evaluated regarding their physical and mechanical properties of both before and after accelerated weathering by ultraviolet (UV) irradiation. The total time of exposure of the WPCs to UV irradiation was 1800 h. The water absorption, volumetric swelling and shrinkage of WPCs did not affected by UV irradiation. Among the mechanical properties, there was no significant differences in bending strength and screw withdrawal resistance of UV treated WPCs compared with those of reference WPCs. However, surface hardness of WPCs showed decrease under UV irradiation. Stereoscopic microscopy observation revealed deterioration of the surface layer polymer in all weathered WPCs by UV. Exposure of the WPCs to UV irradiation caused decomposition and disappearance of the polymer layer. From this result, we can estimate that damage of polymer by UV led to a decrease in the surface hardness of the WPCs. The wood flours retained original shape after accelerated weathering by UV irradiation.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.5-14
• /
• 2002

In this study, stress-deformation characteristics of buried pipe are studied. A numerical model, i.e., Egg-Cam Clay is introduced for the analysis of soft clay. Cam Clay model has a difficulty in analyzing soft clay that has two properties of shrinkage and swelling. Egg-Cam Clay model is modified format of Cam Clay model. In addition, Mohr-Coulomb model using finite element method is employed to verify effects of the geogrid, EPS geofoam. Stress deformation of several cases of pipe and other reinforcemnt material combinations are analyzed. Geofoam and geogrid have positive effects on the deformation characteristics.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.4
• /
• pp.45-58
• /
• 1987

This study was carried out to improve the physical and mechanical properties of Pupulus alba $\times$ glandulosa treated by the heat and compression. The results obtained were as follows. 1. The specific gravity of the wood was conspicuously increased by the lincreasing of pressing level. 2. The shrinkage of the wood was increased. by the increasing of pressing level. The radial shrinkage was 6.41-8.81%, the tangential shrinkage was 8.98-19.81 %, and the longitudinal shrinkage was 1.46-1.91 %. Comparing to the untreated stock, the rate of increase was 48.7-104.4% in radial direction. 1.7-124.4% in tangential direction and 60.4-109.9% in longitudinal direction, respectively. 3. The rate absorption of 30% compressed stock was Similar to that of untreated stock. but the rate of absorption of 40 % or more compressed stock was increased highly. 4. The thickness swelling of the wood was not changed in radial direction at pressing level, but was conspicuously increased in tangential direction under the pressing level of 40% and 50%. 5. The heat and compression treatment affected on the mechanical properties of the wood. The longitudinal compressive strength was increased under the pressing level of up to 40%, but was decreased under the pressing level of 50%. The bending strength was not changed under the compression percentage of up to 30%, but was decreased under the pressing level of 30% or more. And, the absorbed energy in impact bending was increased to 128% under the pressing level of up to 30%, but was decreased under the pressing level of 30% or more. Conclusionly, the mechanical properties of the wood was improved by the heat and compression treatment, but the strength of the wood was decreased under the pressing level of a certain level or more(in this study, pressing level of 30% or more). This was because of the wood deterioration due to the deformation(shrinkage, crack, failure) of wood tissues induced by the heat and compression treatment, the heat analysis of wood components induced by the heating, and the drop of the degree of polymerization.