• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.480-485
• /
• 2020

The extended Maxwell-Wagner polarization model is employed to describe the ER behavior of the conducting particle ER suspensions, and solutions to the equation of motion are obtained by dynamic simulation. The simulation results show the nonlinear ER behavior (Δτ∝Eⁿ, n≈1.5) of the conducting particle ER suspensions. The response point, where shear stress reaches steady-state, is the point where stable break-up and rebuild of the chain-like structure of particles reaches. Also, it shows the minimum of shear stress, which corresponds the start-up of random particle configuration. The shear stress reaches plateau as particle volume fraction increases.

• YAKHAK HOEJI
• /
• v.50 no.2
• /
• pp.78-83
• /
• 2006

VISA and VRE are the main causes of surgical infection, urinary tract infections and bacteremia in hospitals. In this study; we selected VISA (Vancomycin Intermediate resistant Staphylococcus aureus) and VRE (Vancomycin Resistant Enterococcus) isolated from the clinical isolates. One of the isolated strains indicated the high resistance to severel anti-biotics (Vancomycin, Teicoplanin, Mupirocin, Synercid, Ciprofloxacin, Gentamicin, Lincomycin, Cefotaxim, Meropenem). Antimicrobial activity of Bifidobacterium spp. against VISA and VRE were measured. About $10^4$ cells of VISA or VRE were mixed with 1,5 and 9 ml of Bifidobacterium and the final volume was adjusted to 10 ml with brain heart infusion (BHI) broth. The cell suspension was incubated for 3, 6, 9, and 24 hr, serially diluted and then plated on BHI agar plate. As numbers of Bifidobacterium were increased viable cell count of VISA and VRE decreased. The strongest antimicrobial activity of the Bifidobacterium was observed after 9hr incubation in any mixture, almost completely inhibiting the growth of VISA and VRE.

• Korea-Australia Rheology Journal
• /
• v.16 no.4
• /
• pp.175-182
• /
• 2004

Colloidal coating solution was prepared to enhance the hydrophilic property of the film surface. Water and ethanol were used as the dispersion media and (glycidoxypropyl) trimethoxysilane (GPS) as a binder in the colloidal silica coatings. Ethylene diamine was added to the colloidal silica solution as the curing agent. The colloidal silica solution was regarded as a hard-sphere suspension model with low volume fraction of the silica particles. Rheological properties of the silica suspensions modified with GPS have been investigated as a function of pH and concentration. The acidic solution showed high viscosity change by fast hydrolysis reaction and adsorption of the organic binders on the surface of silica particles. However, the hydrolysis was slow at the basic condition and the binders combined with themselves by condensation. The viscosity change was smallest at pH 7. The viscosity increased with the curing time after adding ethylenediamine, and the increase of viscosity at low pH was higher than that at high pH. The hydrophilic properties of the coating film were investigated by the contact angle of water and film surface. The smallest contact angle was shown under the strong acidic condition of pH 2.

• Applied Biological Chemistry
• /
• v.34 no.1
• /
• pp.21-25
• /
• 1991

Twenty-six japonica and 19 Tongil type milled rices were grouped based on water uptake rate at $23^{\circ}C$ and interrelationships between starch properties and hydration group were investigated. There were no significant differences in relative crystallinity, transmittance increase rate of 0.1% starch suspension and soluble amylose between japonica and Tongil type rices. The gel volume of starch n 3M KSCN solution of Tonsil type rice starch was significantly higher than that of japonica one. However, no correlations were observed between starch properties and hydration groups.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.915-924
• /
• 2016

After a severe accident to the nuclear reactor, the in-vessel retention strategy is a key way to prevent the leakage of radioactive material. Nanofluid is a steady suspension used to improve heat-transfer characteristics of working fluids, formed by adding solid particles with diameters below 100nm to the base fluids, and its thermal physical properties and heat-transfer characteristics are much different from the conventional working fluids. Thus, nanofluids with appropriate nanoparticle type and volume concentration can enhance the heat-transfer process. In this study, the moving particle semi-implicit method-meshless advection using flow-directional local grid method is used to simulate the bubble growth, departure, and sliding on the downward-facing heating surface in pure water and nanofluid (1.0 vol.% $Al_2O_3/H_2O$) flow boiling processes; additionally, the bubble critical departure angle and sliding characteristics and their influence are also investigated. The results indicate that the bubble in nanofluid departs from the heating surface more easily and the critical departure inclined angle of nanofluid is greater than that of pure water. In addition, the influence of nanofluid on bubble sliding is not significant compared with pure water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.98-103
• /
• 1994

Some quality characteristics of tofu prepared with soyprotein isolate (SPI) were investigated to study the effects of various ratio of coagulants mixture and addition of oil, sucrose and dextrin. The tofu was prepared by addition of coagulants into the boiled SPI suspension and compression. The results showed that the mixed coagulants of CaCl $_2$-GDL(50 :50) and CaSO$_4$-GDL(25 :75) resulted the highest volume yield of 4.23g/g SPI among the various ratios of CaCl$_2$-CaSO$_4$, CaCl$_2$-GDL and CaSO$_4$-GDL. The water holding capacity(WHC) expressed as the area of water absorbed on filter paper was relatively high for those tofu coagulation with CaCl$_2$-GDL(75 : 25) and CaSO$_4$ -GDL(75 : 25). Addition of sucrose or oil-sucrose (1 : 1) decreased the yield wihle WHC was improved. Their addition also caused less hard and cohesive tofu which was coagulated by CaCl$_2$-GDL(75 : 25) and CaSO$_4$-GDL(75 : 25).

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1682-1686
• /
• 2004

A slit-flow apparatus with laser diffraction method has been developed with significant advances in ektacytometry design, operation and data analysis. In the slit-flow ektacytometry (or laser-diffractometry), the deformation of red blood cells subjected to continuously decreasing shear stress in slit flow is measured. A laser beam traverses a diluted blood suspension flowing through a slit and is diffracted by RBCs in the volume. The diffraction patterns are captured by a CCD-video camera, linked to a frame grabber integrated with a computer, while the differential pressure variation is measured by a pressure transducer. Both measurements of laser-diffraction image and pressure with respect to time enable to determine deformation index and the shear stress. The range of shear stress of 0 ${\sim}$ 35 Pa and measuring time is less than 2 min. When deforming under decreasing shear stress, RBCs change gradually from the prolate ellipsoid towards a circular biconcave morphology. The Deformation Index (DI) as a measure of RBC deformability is determined from an isointensity curve in the diffraction pattern using an ellipse-fitting program. The advantages of this design are simplicity, i.e., ease of operation and no moving parts, low cost, short operating time, and the disposable kit which is contacted with blood sample.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.847-852
• /
• 2007

This study investigated an efficient method for the extraction of astaxanthin from the red yeast Xanthophyllomyces dendrorhous. The extraction process comprised three steps: 1) cultivating the yeast; 2) treating the yeast culture suspension with microwaves to destroy the cell walls and microbodies; and 3) drying the yeast and extracting the astaxanthin pigment using ethanol, methanol, acetone, or a mixture of the three as the extraction solvent. Ultimately, various treatment tests were performed to determine the conditions for optimal pigment extraction, and the total carotenoid and astaxanthin contents were quantified. A frequency of 2,450 MHz, an output of 500 watts, and irradiation time of 60 s were the most optimum conditions for yeast cell wall destruction. Furthermore, optimal pigment extraction occurred when using a cell density of 10g/l at $30^{\circ}C$ over 24 h, with a 10% volume of ethanol.

• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.84-89
• /
• 1996

This study carried out batch and continuous experiments using calcium hydroxide as neutralization agent and immobilization media for removing the ethylene glycol in the pretreated polyester weight loss wastewater. The $TCOD_{Mn}$ concentration in the treated wastewater using culture of iramobilization and suspension for the synthetic wastewater were found as 650mg/l and 1,250mg/l after 48hours, respectively. SVI(Sludge Volume Index) and $TCOD_{Mn}$ concentration were 74 and 73mg/l at optimum F/M ratio, 1.32kg-TCO $D_{Mn}$ /day. kg-MLVSS. The $TCOD_{Mn}$ concentration and removal efficiency were 213mg/l and 93.5% by continuous experiments in the air-lift bioreactor, respectively. The $TCOD_{Mn}$ concentration was 82mg/l, and also the MLVSS concentration was 2,550mg/l, when the volumetric loading rate was 3.04kg-$TCOD_{Mn}/m^{2}$ day for real polyester weight loss wastewater.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.19-23
• /
• 2022

We have been developing a magnetic separation device that can be used in low magnetic fields for paramagnetic materials. Magnetic separation of paramagnetic particles with a small particle size is desired for volume reduction of contaminated soil in Fukushima or separation of iron scale from water supply system in power plants. However, the implementation of the system has been difficult due to the needed magnetic fields is high for paramagnetic materials. This is because there was a problem in installing such a magnet in the site. Therefore, we have developed a magnetic separation system that combines a selection tube and magnetic separation that can separate small sized paramagnetic particles in a low magnetic field. The selection tube is a technique for classifying the suspended particles by utilizing the phenomenon that the suspended particles come to rest when the gravity acting on the particles and the drag force are balanced when the suspension is flowed upward. In the balanced condition, they can be captured with even small magnetic forces. In this study, we calculated the particle size of paramagnetic particles trapped in a selection tube in a high gradient magnetic field. As a result, the combination of the selection tube and HGMS (High Gradient Magnetic Separation-system) can separate small sized paramagnetic particles under low magnetic field with high efficiency, and this paper shows its potential application.