• 한국연초학회지
• /
• 제21권1호
• /
• pp.64-69
• /
• 1999

The effect of phytohormones, light and phosphate on in vitro production of ubiquinone 10 from the suspension cultures of Nicotiana tabacum cv. Xanthi callus was investigated. The inoculum size and cultured time in the suspension culture had to be at least over 2 % of medium volume at 15 days for the excellent growth of Xanthi callus. The growth of Xanthi callus in the suspension culture was improved by addition of NAA and 2,4-D, especially NAA 1.0mg/1 alone, at the light condition. The optimal concentration of phytohormone was 0.1 mg/l 2.4-D and 1.0 mg/l NAA for productivity of ubiquinone 10 in the suspenseion of Xanthi callus. Addition of 3mM KH$_2$PO$_4$ to the medium was more effective in promoting ubiquinone-l0 formation than other concentration in the light condition. Content and production of ubiquinone-l0 in the suspension cultures of Xanthi callus were the highest at the MS media containing 0.5mg/L kinetin, 0.5mg/L 2,4-D, 1.0mg/1 NAA, 3mM phosphate and 2 % inoculum in the light.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1042-1044
• /
• 1995

This paper provides the results and analyses of investigations into porcelain suspension insulators failures on the KEPCO system. The high failure rate of suspension insulators on distribution lines has been attributed to the volume expansion of the cement, the insulation puncture breakdown of the porcelain and the power arc failure. The utility must use only the good insulators and at least reduce the insulator failure rate. So, this paper recommends that the utility make test criteria(cement expansion test, steep front-of-wave flashover voltage test and power arc test. etc) on the suspension insulators.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.111-118
• /
• 1998

Surge pressure problem at the oil return line of the hydraulic circuit of an active suspension system for passenger cars was investigated by experiments and numerical analyses. In the numerical analyses, the method of characteristics was used for simulating unsteady flow in the hydraulic system and gas discrete model was adopted for estimating gas volume variation in separated liquid column. In the experiments and analyses, effects of the physical parameters of the accumlator on smoothing surge pressure was elucidated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.74-76
• /
• 2002

The suspension insulators are subjected to harsh environment in service for a long time. Long term reliability of the insulators is required for both mechanical and electrical performances. We studied an analysing method to find out a deformation of brittle porcelain with a thermal expansion of cement for suspension insulator. These simulation analysis and experimental results show that cement volume growths affect severely to be mechanical failure ageing.

• 약학회지
• /
• 제34권5호
• /
• pp.302-310
• /
• 1990

A study has been made of the Korean bentonite aqueous suspension contrast with American bentonite by means of XRD IR swelling, gel formation and rheogram at various conditions such as concentration, temperature and pH. The Korean bentonite was identified as montmorillonite clay containig a small proprotion of crystoballite and mordenite, and its swelling power were acceptable for requirements of Korean pharmacopeia regulations though its values were not satisfied. Korean bentonite swelled to 10 times and American one did to 15 times compared to its bulkiness of powder. The rheogram of Korean bentonite suspension reveals bulged pseudoplatic flow with yield value at higher concentration and pseudoplastic flow without yield value at lower concentration. The higher the concentration, the greater were the apparent viscosity and hysteresis loop. Korean bentonite suspension showed insignificant temperature dependence on both apparent viscosity and hysteresis loop and it was more temperature dependent on viscosity but less on hysteresis loop than those of American sample. The pH dependence was so high on viscosity that apparent minimum value was near pH 7 and maximum value at pH 3 or 7. The hysteresis loop appeared minimum over the pH range 5-7 and maximum near pH 3 or 11. The Korean bentonite was inferior to the American bentonite in swelling volume, gel formation, thioxotropy, however, it would be possible to improve the quality of Korean bentonite by developing the method of purification for bentonite clay.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.

• Korea-Australia Rheology Journal
• /
• 제17권4호
• /
• pp.149-156
• /
• 2005

A simple constitutive model for viscoelastic suspensions is discussed in this paper. The model can be used to predict the rheological properties (relative viscosity and all stresses) for viscoelastic suspensions in shear and elongational flow, and the constitutive equations combine a 'viscoelastic' behaviour component and a 'Newtonian' behaviour component. As expected, the model gives a prediction of positive first normal stress difference and negative second normal stress difference; the dimensionless first normal stress difference strongly depends on the shear rate and decreases with the volume fraction of solid phase, but the dimensionless second normal stress difference (in magnitude) is nearly independent of the shear rate and increases with the volume fraction. The relative viscosities and all the stresses have been tested against available experimental measurements.

• 동의생리병리학회지
• /
• 제27권2호
• /
• pp.233-238
• /
• 2013

The development of healthy beverages are increasing by big concerns for well-being. The aim of this study is to develop cultivated wild ginseng-Kyungohkgo (CKOG) beverage using cultivated wild ginseng instead of natural wild ginseng for Kyungohkgo. To examine physiochemical properties of CKOG beverage, pH, degree Brix, acidity, Huntor color, particle size and sedimentation volume were measured. When compared with commercial KOG beverage, CKOG beverage was lower in pH, acidity, particle size and higher in sedimentation volume. In the sensory evaluation of CKOG beverage, the best recipe of healthy CKOG beverage was 20% CKOG, 5.7% honey, 0.2% citric acid and 74.1% of water. In stability testing, pH, degree Brix, acidity, Huntor color of CKOG beverage was not changed, microbes in CKOG beverage was not detected for 60 days. These results suggest that CKOG may have a possibility of development as healthy beverage.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.240-243
• /
• 2001

Recently, many automobile parts produced by semi-solid forming(SSF) process has been applied for improved weight reduction, better environmental protection and energy savings. SSF process was well developed for high volume production of light weight aluminum components. In this paper, knuckle has been manufactured with A357 by SSF and thor investigated for microstructures and mechanical properties followed by various heat-treatment conditions. It was found that the examined microstructure was equiaxed at the whole cross-section area and as a result, the mechanical properties were satisfied by 100MPa YS, 260MPa UTS and $14\%$ elongation.

• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1141-1151
• /
• 1998

An effective thermal conductivity measurement for suspensions of microparticles in oil mixture is conducted in order to evaluate the shear rate-dependence of the thermal conductivity of suspensions. Measurements are made for rotating Couette flows between two concentric cylinders. The rotating outer cylinder is immersed into a constant temperature water bath while the stationary inner cylinder is subject to a uniform heat fluff. Test fluids are made to be homogeneous suspensions, in which neutrally buoyant microparticles ($d=25{\sim}300{\mu}m$) are uniformly dispersed. The present measurements show strong shear-rate dependent thermal conductivities for the suspensions, which are higher than those at zero shear rate. The shear rate dependent thermal conductivity increases with the particle size and volume concentration.4 new model for shear rate-dependent thermal conductivity of microparticle suspensions is proposed; the correlation covers from zero shear rate value to asymptotic plateau value at moderately high shear rates.