• 제목/요약/키워드: suspended particles

검색결과 352건 처리시간 0.028초

익산시의 부유먼지에 관한 연구 (Studies on the Total Suspended Particulates in Iksan City.)

  • 전병영
    • 환경위생공학
    • /
    • 제14권4호
    • /
    • pp.158-164
    • /
    • 1999
  • This study was carried out to investigate total suspended particulates (TSP) in Iksan area collected by nine stages Anderson air sampler and High volume air sampler from Jul. 1996 to Jul. 1998.The results are as follows1. The average of TSP concentration to be collected by Anderson air sampler and High volume air sampler in Iksan city are $59{\mu}g/m^3$, $67{\mu}g/m^3$. It was below the level of environmental standard. 2. The average of TSP concentration by measured method are HVAS > AS > Gov. 3. The average of TSP concentration on seasonal change are higher spring than winter. It were $65.5{\mu}g/m^3$ of Spring, $57{\mu}g/m^3$ of Summer, $52.5{\mu}g/m^3$ of Fall, $61{\mu}g/m^3$ of Winter. 4. Particle size 3istribution of atmospheric particulate was divided into two groups, coarse group was made by particles larger than $1.1-2.1{\mu}m$ in diameter and fine groups smaller than $1.1-2.1{\mu}m$ in diameter. about 50% of total suspended particle measured by Anderson air sampler during the sampling period was coarse particle.

  • PDF

역삼투 공정 파울링 지표로서 SDI(Silt Density Index)의 적합성 검증 (Verification of Silt Density Index (SDI) as a fouling index for reverse osmosis (RO) feed water)

  • 김수한;김충환;강석형;이원태;임재림
    • 상하수도학회지
    • /
    • 제25권4호
    • /
    • pp.489-495
    • /
    • 2011
  • Silt Density Index (SDI) has been used as a fouling index for reverse osmosis (RO) processes for decades. In order to decrease RO fouling, feed water should meet SDI standard, which was used to select a proper pretreatment system for RO processes. However, SDI is supposed to be sensitive only to particles larger than 0.45 ${\mu}m$ in terms of diameters while nanoparticles and dissolved organic matter can be potent foulants for RO processes. Our study started from the suspected performance of SDI as a RO fouling index. SDI data from pilot plants located world wide including South Korea were collected and analyzed. Suspended partcle concentration (i.e., turbidity and particle counts), and dissolved organic matter concentration (i.e., dissolved orgnaic carbon (DOC) concentration) data were also collected and compared to SDI values of same water samples. We found that SDI values were not only affected by suspended particle concentration but also by dissolved organic matter concentration. Therefore SDI can be used as a reasonable fouling index for RO feed water because the main foulants for RO processes are suspended particle and dissolved organic matter.

수질화학 조성이 수자원환경에서의 미세 부유입자 응집 거동에 미치는 영향 연구 (Investigation of the effect of water chemistry on biologically mediated flocculation in the aquatic environment)

  • 최정우;이병준
    • 한국수자원학회논문집
    • /
    • 제50권11호
    • /
    • pp.715-723
    • /
    • 2017
  • 생체고분자물질은 수자원환경에서 점토, 미생물, 바이오매스 등 부유입자들을 응집시키고, 침전, 퇴적시키는 역할을 한다. 본 연구는 다양한 수질화학 조건이 생체고분자물질에 의한 부유입자 응집에 미치는 영향을 파악하고자, 수질화학 조건을 제어하여 응집실험을 수행하였다. 각 응집실험은 이온강도, 2가 양이온 농도, 휴믹물질 분율이 제어된 실험조건에서 Kaolinite 현탄액에 생체고분자물질인 Xanthan Gum을 주입하여 수행하였다. 수체가 가지는 응집능은 응집체 크기 및 잔류 고형물 농도를 측정을 통하여 평가하였다. 본 연구에서, 이온강도 증가는 점토입자 및 생체고분자물질 간 정전기적 반발력을 감소시키고 생체고분자물질이 점토입자 간 가교를 형성하여 응집을 증대시킨 것으로 파악되었다. 이온강도가 0.001에서 0.1 M NaCl로 증대될 경우, 응집을 증진시켜 응집체 크기는 약 3배 이상 증대되고 부유고형물농도는 약 2.5배 이상 저감되었다. 또한, 2가 양이온이 수체에 존재하는 경우, 점토입자-생체고분자물질 혹은 생체고분자물질 상호 간 가교를 형성하여, 즉 점토-$Ca^{2+}$-고분자 또는 고분자-$Ca^{2+}$-고분자 가교를 형성하여, 생체고분자물질에 의한 부유입자 응집을 증대시켰다. 수체에 $Ca^{2+}$가 낮은 농도라도 존재할 경우, 응집을 크게 증진시켜 부유고형물농도가 원 주입농도에 비하여 20배 이상 저감되는 것으로 나타났다. 하지만, 휴믹물질이 존재하는 경우, 점토입자 표면에 흡착되어 점토입자의 정전기적 반발력을 증대시켜 생체고분자물질의 흡착을 방해하고 응집을 감소시켰다. 수체에 휴믹물질이 존재할 경우, 응집을 저감시켜 부유고형물농도는 저감되지 않고 원 주입농도와 유사하게 나타났다. 본 연구의 결과는 수자원환경에서 부유입자 및 퇴적물 거동을 이해하고 수질 및 퇴적물에 대한 최적 관리 방안을 도출하기 위한 기초 자료로 활용될 수 있으리라 기대된다.

새만금간척 퇴적과정에 관한 연구(II) -새만금간척 시행 후를 중심으로- (A Study of Sedimentation Processes of Saemangeum Reclamation(II) - A Study of Sedimentation Processes after Saemangeum Reclamation -)

  • 신문섭
    • 한국농공학회지
    • /
    • 제44권5호
    • /
    • pp.33-40
    • /
    • 2002
  • The purpose of this study is to find the variation of sedimentation patterns after Saemangeum reclamation. Residual flow after Saemangeum reclamation was calculated prognostically from the observed water temperature and salinity data in May 1992 by the Marine Development Institute of Gunsan National University and wind data which were obtained from spring 1969 through winter 1977 by the Kunsan Meteorological Observatory. Three dimensional movements of injected particles due to currents, turbulence and sinking velocity are tracked by the Euler-Lagrange method. When suspended sediments with the size of soil grain of 30 ㎛ are injected in the Sinsi drainage sluice, their dispersion range of sediment is around Gogunsan islands. When suspended sediments with the size of soil grain of 200 ㎛ are injected in the Garyeok drainage sluice, their dispersion range of sediment was around the Garyeok drainage sluice and Byeonsan coastal area.

Performance Analysis of a Hydrodynamic Separator for Treating Particulate Pollutants in Highway Rainfall Runoff

  • Yu, Jianghua;Yi, Qitao;Kim, Young-Chul
    • Environmental Engineering Research
    • /
    • 제14권4호
    • /
    • pp.262-269
    • /
    • 2009
  • This study examined the separation characteristics of particles in the rainfall runoff from paved roads using a ${\varphi}7.5$ cm hydrocyclone. The volume fraction and total suspended solids concentrations in the overflow and underflow from the hydrocyclone, as well as the separation efficiency were determined. The results indicated that the overflow volume increased with increasing operational pressure, but decreased with decreasing ratio of underflow outlet to inlet sizes ($D_u/D_i$), while the underflow to overflow volumes showed contrary behavior. The total suspended solid (TSS) concentration ratio between the overflow and inflow ($TSS_{over/in}$) decreased as a function of the operational pressure, while the corresponding ratio of underflow to inflow ($TSS_{under/in}$) increased. There was no visible difference in the $TSS_{over/in}$ with increasing $D_u/D_i$ ratio, but the $TSS_{under/in}$ decreased sharply. The particle removal efficiency was mainly affected by the particle size.

Distribution of Pyrethroid Insecticides in a Nursery Drainage Channel

  • Lee, Sang-Jin;Shin, Hyun-Moo
    • 한국환경과학회지
    • /
    • 제12권8호
    • /
    • pp.891-896
    • /
    • 2003
  • The objectives of this study wre to investigate the effects of two synthetic pyrethroids, bifenthrin(BF) and permethrin(PM), in runoff and to evaluate the effects of suspended solids (SS) in the transport of pyrethroid along the drainage channel. Monitoring of BF and PM was conducted with the runoffs as well as in sediments existing along the drainage channel at a nursery site located in southern California, USA. This study also suggests Best Management Practices (BMPs) to alleviage the pollution caused by heavy usage of pyrethroid insecticides at nursery sites. Due to a high affinity to solid particles of pyrethroid insecticides, the concentrations of BF and PM were proportional to the SS contents along the drainage channel. This study suggests that alleviation of pyrethroids existing in runoffs could be controlled by the removal of suspended solids in runoffs and potential implications of current drainage channels for mitigation of pesticides associated with runoffs.

오일입자 원심분리기 유동장의 수치해석적 연구 (A Numerical Study on the Flowfield of a Cyclone Separator for Oil Droplets)

  • 김상덕
    • 한국항공운항학회지
    • /
    • 제23권4호
    • /
    • pp.36-41
    • /
    • 2015
  • The cyclone separator is a simple device, which causes the centrifugal separation of materials such as droplets or particles in a fluid stream. The cyclone separator utilizes the energy obtained from fluid pressure and linear motion to create rotational fluid motion. This rotational motion leads the materials suspended in the fluid to separate from the fluid quickly due to the centrifugal force. The rotation is produced by the tangential or involuted introduction of fluid into the vessel. These materials may be droplets of fuel in blow-by gas through an engine. Droplets suspended in the feed liquid may separate according to size, shape, or density. And the change of part dimension in a cyclone separator can yield the its performance variation. The current study shows the influence of design parameters on the performance of a cyclone separator for blow-by gas.

겨울철 서울도심의 대기중 부유분진의 특성 (The Characteristics of Suspended Particulate Matters in Downtown Seoul During Winter Period)

  • 김신도;김종호;이정주
    • 한국대기환경학회지
    • /
    • 제8권2호
    • /
    • pp.105-111
    • /
    • 1992
  • The characteristics of suspended particulate matters(dust) in Seoul had been studied. The effects of various environmental factors, such as passengers, motor vehicles, wind velocity, wind direction, temperature and humidity were examined during the study period. It was shown that the dust emission occurred through the heating was the major source, and the contribution of passengers and motor vehicles was relatively negligible during the night. It was also revealed that the number concentration between $0.5{\mu}m$ and $2.0{\mu}m$ was increased due to the attachment among the dusts and mists by the increased humidity during the night. Considering the fact that the particles larger than $2{\mu}m$ take the most part of weight concentration, it was suggested that the PM-10 method which considered respirable particle as a weighting factor should be adapted in the evaluation air quality.

  • PDF

일부 주조작업장 공기중 분진 중금속 농도 (A Survey of Heavy Metal Concentrations in Casting Work Environment)

  • 김영식;김규광;한홍
    • 한국환경보건학회지
    • /
    • 제18권1호
    • /
    • pp.1-5
    • /
    • 1992
  • A study was performed to measure the heavy metal concentrations of suspended particles in iron castings during February, 1990. The heavy metal concentrations were analyzed using patricles atomic absorption spectrophotometer. The results were as fellows 1. The concentrations of suspended paticles by casting process were at furnace 4.19mg/m$^{3}$ at pouring 2.93mg/m$^{3}$ at nonferrous furnace 3.90mg/m$^{3}$, at molding 1.17mg/m$^{3}$, jung ja 2.23mg/m$^{3}$, desanding 5.42mg/m$^{3}$, sand treatment 4.82mg/m$^{3}$, finishing 1,20mg/m$^{3}$. 2. Among the total of 8 iron casting workplaces, the concentrations Fe of furnace was 0.36mg/m$^{3}$, Cu of nonferrous furnace 0.02mg/m$^{3}$, Pb of pouring 0.02mg/m$^{3}$, Cr of desanding 0.01mg/m$^{3}$ and Mn of furnace 0.03mg/m$^{3}$.

  • PDF

입자수송시스템 내 공기-입자 유동장의 압력손실 특성 해석 (Analysis of Pressure Drop Characteristics for the Air-Particle Flow in Powder Transport Piping System)

  • 이재근;구재현;권순홍
    • 한국유체기계학회 논문집
    • /
    • 제5권1호
    • /
    • pp.20-26
    • /
    • 2002
  • This study reports the analysis of the pressure drop characteristics for the air-particle flow in powder transport piping system. The pressure drop characteristics of air-particle flow in piping system is not well understood due to the complexity of particles motion mechanism. Particles or powders suspended in air flow cause the increase of the pressure drop and affect directly the transportation efficiency. In this study, the pressure drop in powder transport piping system with straight and curved pipes is analyzed for the interactions of air flow and particle motion. The total pressure drop increases with increasing of the pipe length, the mixture ratio, and the friction factor of particles due to the increasing friction loss by air and particles in a coal piping system. For the coal powders of $74{\mu}m$ size and powder-to-air mass mixture ratio of 0.667, the total pressure drop by the consideration of powders and air flow is $30\%$ higher than that of air flow only.