• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.154-162
• /
• 2015

As there is no case study with current status, measurements or description on the state of actual site of rural area only, the delivery of actual conditions about such an area is significantly limited. The purpose of this study is to pinpoint issues with housing conditions of low-income family with disabled members in the rural area. For such a purpose, 25 households of disabled people have been visited for interview, on-site research and survey, of which results are summed up in this paper as following: First, average monthly income of such family turned out to be KRW 480,000, most of which is from the government subsidy. High ratio of such families has resided in a house with average size of approximately 56m2 for about 24 years. Secondly the most needed maintenance work with top priority was for the toilet, and many of the interviewees expressed their discomfort about small size of their bathrooms and inconvenient facilities therein. Thirdly, most of such houses had too high thresholds that posed danger and inconvenience. Such thresholds had average height of 13cm, which can be considered as completely inconsiderate of disabled users. Fourth issue was that these people needed safety handle that will enable them to stand up or to be in the standing posture in the living room and bedroom where they spend most of their time. Fifthly, they wanted finishing materials with waterproof functionality as well as replacement of finishing materials and wallpaper which were too old and caused hygiene issues. As these issues represent, current housing for disabled people in the rural area turned out to be poor and risky space rather than the place where difficulty of individual situation can be resolved or their disability can be complemented. Thus it can be determined that now is the time to arrange the solutions for such housing difficulties and to establish customized housing plan to ensure safety and convenience.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.4
• /
• pp.109-115
• /
• 2004

Dust scattering is one of the major problem for the residents living nearby construction field with construction noise and vibration. The dust scattering may inflict a considerable damage to psychological, spiritual discomfort to neighboring peoples. Therefore, the trouble of residents living nearby construction field have been increasing. Nevertheless, in our country, adequate guidelines for the dust scattering are not yet established because of the lack of basic data and insufficient research works. In this point, this study has researched its level of damage by conducting of the interview-survey which utilizing of questionnaire-paper asking for those staffs and workers to answer in the construction field, in order to grasp the damage extent of the actual condition effect and response against scattering dust in construction field. As the result, the occurring rate of dust scattering was appeared high compare with other constructing processes, due to utilization of construction equipment that operating at the fundamental basic construction stage, and it was turned out that presently the proper countermeasure and training against scattering dust in the construction site is insufficient. As for the solution mean against that, it is considered that with the better operation of construction site such as the installation of facilities for occurrence-restraint of dust scattering, frequent sprinkling of water, use of thermostat-covers, as well as those methods to be minimized of the occurrence of dust scattering must be contrived through the education for an attention how to use of construction equipment and training at the site.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.172-181
• /
• 2004

The purpose of this study was to develop functional lab gowns in the view of safety and work efficiency. As the first step of this study, we surveyed on satisfaction rates, preferences and inconvenience items in regard of lab gowns. The data was obtained from 138 graduate students specialized in science and 113 medical students. Respondents answered that the first purpose of wearing lab gown was to protect body from danger. Wearing frequency followed with ‘always’, ‘as possible as’, and then ‘sometimes’. Forty-five percentage of respondents answered that they didn't wear lab gowns often in summer because of hot weather. The contaminated or damaged parts of lab gowns followed with cuffs, abdomen, thigh, lower part, and then chest. Washing frequency followed with ‘once a month’, ‘once per six months’, and then ‘more than once a week’ There were significant differences in normal wearing frequency, wearing frequency by season and washing frequency due to major. There were no significant difference by sex and major in all questions. In regard of the protective capacity of current lab gowns, most respondents answered that ‘It's normal’(60%), ‘It's enough’(21%), so that they didn't show much dissatisfaction. Forty-three percentage of respondents were not satisfied with cuffs. Respondents answered that the cuffs were in danger and inconvenient because of broad cuffs. In regard of color, preference for white were high and followed with ivory, light sky, light green. and then light pink. Materials of current lab gowns were cotton/polyester or polyester 100%. Sixty-eight percentage of respondents were satisfied with that and others were not. The reasons for dissatisfactions were as follows; those materials were not protective to chemicals thoroughly enough. Cotton/polyester materials were heavy. Wearing sensation of polyester 100% was not good.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.254-260
• /
• 2007

Trichloroethylene(TCE) is widely used as a degreasing solvent in workplaces. TCE is primarily toxic to the nervous system, however, systemic disorder like Stevens-Johnson syndrome has been recently reported in small-scale factories, where the government has had limited information of chemical use. A survey was performed to investigate the actual condition of using TCE and to provide practical information to occupational health service agencies and professionals. This survey was carried out on 103 factories out of 430 factories which were conducted periodic work environment measurement for TCE. Degreasing was the most popular reason for using TCE in Korea, which reached to 94%. TCE was also used as a solvent for rubber in the coating or molding process, and adhesives in the bonding process. Metal fabrication was the most common as 23%, followed by assembling automobile parts (17%), and machinery (12%). Workers exposed to TCE during full-shift were 52% while 48% were exposed during short period of the shift or intermittently. Manual or semi-automatic work occupied 87% while automatic work was just 13%. Though automatic work by a closed system was generally lower exposed to TCE, compared to manual work, it can cause a high exposure when the maintenance system is improper. Semi-automatic work especially like open-top degreasing process can cause a high exposure when local exhaust system with condensing and refrigerating coils in the degreaser does not work well. In conclusion, the survey showed nationwide status of TCE exposure in various aspects. It can be used to monitor workplaces and workers exposed to TCE to prevent occupational diseases.

• Journal of the Korean housing association
• /
• v.27 no.5
• /
• pp.55-63
• /
• 2016

This study intended to establish a direction for the revitalization of youth culture centers by examining the current status of youth centers operated in Daejeon and how they have been used. Four youth centers in Daejeon were visited and a survey was conducted targeting 180 people using the centers. Frequency, Mean, and ${\chi}^2$ analysis were performed by using SPSS statistics package, and major research outcomes are as follows; There were 6 youth culture centers in Daejeon and showed a lower construction rate of 7.4% on the basis of 81 up, myun and dong. Most youth centers were small, around $300-500m^2$ in total floor area, and accommodated 100-200 people, and the space comprised multipurpose hall, cafeteria, open space, club space, multimedia space, information service room, and guide booth. There were no sports spaces among the target facilities. So, it has created the need for physical activity space to promote health & development. Most users visited centers with their friends and simply to use the facilities, and the satisfaction with the facilities was relatively high at 4.32. The role of the local community and financial support of the government is required to activate the youth culture. Also, for the role of youth culture center, it was suggested that the youth culture center should develop program which corresponds with the level of the youth and boast the interest of the youth.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.180-181
• /
• 2009

This paper is to find the priority of logistics technology development per each field by AHP(Analytic Hierarchy Process) for policy establishment of logistics technology, finding of logistics technology projects. And study on the use actual condition between Consumer and developer in Logistics Technologies. For this study, Survey for logistics technology concerning user's demand and the developer's logistics technology development. And Gap analysis between user and developer in logistics technology development.

• Korean Journal of Social Welfare Studies
• /
• v.48 no.3
• /
• pp.117-143
• /
• 2017

This study empirically analyzed the factors that intensify the unequal distribution of relational goods through the decomposition of relational gaps and the actual condition of relational goods. The results of the analysis are as follows. First, the average time for forming a relationship with family members or others is 158 minutes in 24 hours a day. Second, tobit regression analysis showed that relational goods time increased as they were employed, more family members, and ownership of their home. On the other hand, relational goods decreased when they were female, double-working, aged, divorced, and increased working time. The increase in household income decreased family relational goods, but increased the time with others. Based on the results of this analysis, this study proposed reduction of working time as a way to increase the happiness by sharing the relationship with meaningful people.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6659-6668
• /
• 2014

This study examined the actual condition of the cultural welfare system for the disabled. The survey was completed by 21 public and private museums at a cultural welfare center in Gangwon-do, Yongwol-gun, specialized for museums only between 1 June and 31 July 2014. The study scale questions were analyzed by field surveys in cultural welfare centers and interviewing the museum directors. The results were as follows. First, there were cultural welfare service effects on the controlling culture, art and leisure activities for the disabled. Second, cultural enjoyment improved the quality of life and life satisfaction of the disabled. This study provides a database to improve policy regarding environmental construction, various program developments, visiting performance system development, and supplement and financial support for the disabled audience as a member of society.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.136-145
• /
• 2018

Companies that have suffered serious labor shortages are relocating their factories abroad where they can solve this problem by increasing the employment of foreign workers. Construction sites also employ foreign workers to supplement the scarce manpower, and the demand for foreign workers has been gradually increasing over time. Recently, based on discussions on whether or not to introduce foreign workers, the policy on the input of foreign workers into domestic construction sites has been shifted to exploring the actual input conditions and efficient management methods. In this study, we investigated the current status and input situation of foreign workers at the construction sites of the target area, analyzed the problems they posed from the manager's viewpoint, and derived a method of improving the utilization of foreign workers at construction sites. In order to proceed with this study, we surveyed the actual situation of the construction sites, which consisted mainly of foreign workers and domestic workers (managers), by investigating the construction sites, and conducted 1: 1 interviews to ensure the reliability of the survey. The data obtained from the survey were analyzed using the SPSS analysis program, and the response rate was analyzed for each item. As a result, various problems, such as institutional problems, communication problems, and quality deterioration due to malfunction, appeared. Therefore, this study derives an improvement plan for the efficient utilization of foreign workers by improving the institutional level related to their language education, wages and employment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1739-1744
• /
• 2010

The calculation method using the numerical model developed is currently one of the mose required method to predict sediment transport and bed changes in the rivers. Specially, it is real condition that is applying as it is a single sediment transport equation and sediment transport mode mostly without verification process with field data. The sensitivity analysis and calibration process considering the different sediment transport equations and sediment transport modes should be performed for the accurate bed change prediction of the specified study reach using the a model. Through its process, the optimum sediment transport equation and mode for the study reach should be defined. In this study, bed changes for the actual river are computed using the CCHE2D model allowed to select various sediment transport equations and modes. The bed change sensitivity analysis with different ranges of river flow discharge through its process, the optimum sediment transport equation and mode for the study reach should be defined. The bed change simulation with the actual hydraulic condition and the modeling results are compared with the field survey results.