• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.458-465
• /
• 2011

Characteristics of nearshore surge intensity were investigated by analyzing the tide data at 20 tidal stations. Statistical analysis of the surge data show that surge heights at the western coast are far greater than those at southern and eastern coasts, implying that each coast has its own classified characteristics. Surge height data greater than 30 cm were chosen and their intensities were calculated, and then, typhoon-induced surges were separated. The results show that while surge intensity at the western coast is conspicuous in winter due to the monsoon, it is conspicuous in summer due to the typhoon at other coasts. EOF analysis show that the 1st eigenvector at the western coast is prominent, which is considered to be consistent with above mentioned results.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.4
• /
• pp.292-301
• /
• 2012

The rise in sea surface temperature (SST) as a global warming enhance overall typhoon activity. We assumed that there exist thermodynamic limits to intensity that apply in the absence of significant interaction between storms and their environment. The limit calculations depend on SST and atmospheric profiles of temperature and moisture. This approach do appear to provide resonable upper bounds on the intensities of observed storms and may even be useful for predicting the change in intensity over a long period time. The maximum storm intensities was estimated through the global warming scenarios from IPCC-AR4 report over the North-East Asia. The result shows stronger intensities according to scenarios for increase of carbon dioxide levels. And storm surge simulations was performed with the typhoons which were combined route of the typhoon Maemi (2003) and intensity as climate change scenarios. The maximum increase of storm surge heights was shown about 29~110 cm (36~65%) regionally. Especially at Masan, the result of simulated maximum surge height exceed the 200 years return period surge.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.68-75
• /
• 2010

Recently, the intensity and frequency of typhoons have been on the increase due to unusual weather phenomena and climate change. In particular, on September 13, 2003, typhoon MAEMI (0314) caused heavy damage in the provinces of Busan and Gyongnam, but also provided an opportunity to perform a variety of studies on storm surge. According to investigation reports on the damage resulting from typhoon MAEMI, the areas where coastal inundation occurred were located in reclaimed land under coastal development. In this study, through an image data analysis of historic and present day typhoons affecting Masan, we found that the inundation damage areas corresponded to reclaimed lands. Therefore, using the area around Busan, including the southeastern coast of Korea where typhoons lead to an increased storm surge risk, we performed a storm surge/inundation simulation, and examined the inundation effect on reclaimed land due to the intensified typhoons predicted for the future by climate change scenarios.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.287-292
• /
• 2008

The applicability of stainless steel type 316N to the PZR surge-lines of OPR1000 and APR1400 is investigated. So far, strainless steel type 347 has been used for the OPR1000 surge-lines. The degree of improvement in the leak-before-break(LBB) and component design margin is evaluated when stainless steel type 347 is substituted by type 316N. For the study, the tensile and J-R tests on type 316N and type 347 stainless steels were performed at 316 and the microstructure of both types was examined. Stainless steel type 316N shows the higher values on the stress-strain curves, J-R curves and stress intensity, Sm, compared to those of type 347. Therefore, stainless steel type 316N ensures the higher LBB and component design margins. As a result, this study shows that stainless steel type 316N could substitute type 347 for the surge-lines of OPR1000 and APR1400.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2009

Linear-tracked typhoons were simulated to investigate the effect of parameter sensitivity at Gyeongnam coastal zone. To do this, appropriateness of the linear-tracked MAEMI(0314) was tested and 175 scenarios were simulated on the basis of virtual MAEMI. The results show surge heights are relatively large at Masan and Tongyeong, and it can be attributed to topographical effects. At Masan, 2.5 m-surge height is probable with the same intensity but slightly different track from the real typhoon MAEMI. At the other stations, surge heights induced by real MAEMI are nearly same as the maximum heights of the virtual typhoons, which indicates the real track of the typhoon MAEMI was almost the most severe one. Surge heights caused by the barometric effect are higher than those by the wind effect, and the former effect shows the maximum at the eye of typhoon.

• Journal of Welding and Joining
• /
• v.29 no.2
• /
• pp.34-39
• /
• 2011

Nickel-based austenitic alloys such as Alloy 82 and 182 had been employed as the weld metals in nuclear power plants (NPPs) due to their high corrosion resistance as well as good mechanical properties. However, since the 2000s, the occurrence of primary water stress corrosion cracking has been reported in conjunction with these alloys in domestic and oversea NPPs. In the present work, we assumed an imaginary crack at the inner surface of a surge nozzle weld that had previously experienced the outside repair welding, and constructed its finite element model. Finite element analysis was performed with respect to the heat transfer, and then to the residual stress for obtaining the total applied stress distributions. These stress distributions were finally converted to the stress intensity factors for estimating crack growth rate. From the comparison of crack growth rate curves for the cases of no repair welding and outside repair welding, it was found that the outside repair welding did not exhibit negative effect on the crack growth for the surge nozzle under consideration in this work; in both cases, the cracks stopped growing before they became the through-wall cracks.

• Journal of Wind Energy
• /
• v.14 no.4
• /
• pp.50-56
• /
• 2023

With the abnormal weather phenomena caused by global warming, the frequency and intensity of lightning strikes are increasing, and lightning accidents are becoming one of the biggest causes of failures and accidents in offshore wind turbines. In order to secure generator operation reliability, effective and practical measures are needed to reduce lightning damage. Because offshore wind turbines are tall structures installed at sea, the possibility of direct lightning strikes is very high compared to other structures, and the role of surge protection devices to minimize damage to the electrical and electronic circuits inside the wind turbine is very important. In this study, a varistor, which is a key element for a class 1 surge protection device for direct lightning protection, was developed. The current density was improved by changing the varistor composition, and the distance between the electrode located on the varistor surface and the edge of the varistor was optimized through a simulation program to improve the fabrication process. Considering the combined effects of heat distribution, electric field distribution, and current density on the optimized varistor surface, silver electrodes were formed with a gap of 0.5 mm. The varistor developed in this study was confirmed to have an energy tolerance of 10/350 ㎲, 50kA, which is a representative direct lightning current waveform, and good protection characteristics with a limiting voltage of 2 kV or less.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.838-849
• /
• 2017

This paper proposes penalty factor equations that take into consideration the weld strength over-match given in the classified form similar to the revised equations presented in the Code Case N-779 via cyclic elastic-plastic finite element analysis. It was found that the $K_e$ analysis data reflecting elastic follow-up can be consolidated by normalizing the primary-plus-secondary stress intensity ranges excluding the nonlinear thermal stress intensity component, $S_n$ to over-match degree of yield strength, $M_F$. For the effect of over-match on $K_n{\times}K_{\nu}$, dispersion of the $K_n{\times}K_{\nu}$ analysis data can be sharply reduced by dividing total stress intensity range, excluding local thermal stresses, $S_{p-lt}$ by $M_F$. Finally, the proposed equations were applied to the weld between the safe end and the piping of a pressurizer surge nozzle in pressurized water reactors in order to calculate a cumulative usage factor. The cumulative usage factor was then compared with those derived by the previous $K_e$ factor equations. The result shows that application of the proposed equations can significantly reduce conservatism of fatigue assessment using the previous $K_e$ factor equations.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2434-2439
• /
• 2008

This paper was studied on the cavitation instability of a Solution Pump Inducer in an absorption chiller-heater. Inlet pressure of LiBr and rotational speed at nominal mode are 2,800 Pa and 3,500 rpm respectively. Due to the marginal operation of available NPSH, the cavitation performance of the inducer is critical for the stable operation without the deterioration of head performance. In the study, cavitation performance and its mode of instability was investigated experimentally. Water was used as the working fluid and the test inducer was scaled up as 1.75 times for detail measurements and flow visualization. Inlet pressure was controlled by a vacuum pump. This research focused on types of cavitation instability and phenomena to investigate the possibility of harmful damage due to cavitation instability. Casing wall pressure and instantaneous inlet pressure was measured to observe the unsteady flow characteristics. Through the visualization and spectrum analysis of pressure, the occurrence region and intensity of asymmetric cavitation and cavitation surge are analyzed in the test inducer.

• Journal of the Korean earth science society
• /
• v.27 no.3
• /
• pp.302-312
• /
• 2006

This study has investigated the effect of Arctic Oscillation (AO) on cold surge through atmospheric circulation and heat source analysis for the past winters from 1979 to 2004. The number of occurrence of cold surge in the negative AO phase is about 14.3% larger than that in the positive AO phase. The number of occurrence of cold surge per a month in the negative (positive) AO phase is about 1.33 (1.05), respectively, indicating that the negative AO phase has about 26.6% larger occurrence than the positive AO phase. It means that the cold surge has occurred frequently in particular months with the negative AO phase. And it also shows that surface temperature in the negative AO phase is about $0.6^{\circ}C$ lower than in positive AO phase. As a result of the analysis for the difference of heat source according to the intensity of AO, it shows that surface air temperature around the Korean peninsula in the negative AO phase is more lower than in positive AO phase by the intensification of cold advection term. However, heat source term cancels out the cooling effect by cold advection term, indicating that it suppresses the decrease in surface air temperature. It results in a small difference of $0.6^{\circ}C$ in surface air temperature between the positive and negative AO phase in spite of the significance of atmospheric circulation change.