한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
/
pp.784-791
/
2000
To improve the uniformity of slurry spreading and to reduce the odor problem, a hose slurry spreader was developed, which spread the slurry near to the surface of the soil. First, the uniformity of slurry spreading was investigated. The best result of 8.1 % CV was obtained at the rotor speed of 250 rpm than any other speeds for the swine slurry, which contains 13.6% of dry matter. In case of dairy cattle slurry, which contains 8.2% of dry matter, the uniformity has the best result of CV 7.2% by high rotor speed of 330 rpm. A high speed of rotor has built a sufficient pressure in the distributor and discharged a uniform quantity of slurry through the hoses. Therefore, in practical use one should work with rotor speed over 300 rpm to maximize the uniformity of slurry spreading. Second, odor test was done with the swine slurry. While the conventional spreader shows ∑ value 440, the hose slurry spreader and its combination of disk harrow show ∑ value 258 and 184 respectively. With the air dilution sensual test and a 3-point odor bag, the conventional spreader shows 66.9 or 35.4 point and by the hose slurry spreader is 9.7 or 11.1 point. So, the developed spreader was found to have a greater effect on the reduction of odor problem. Finally, it is recommended to spread certain amount of the slurry for paddy field equivalent to the chemical fertilizer based on the N-content. It means 22 tons of swine slurry per ha. Since most of the livestock farms possess less arable land, a system of linking farms is necessary to utilize the slurry crossover the farms. The cost of slurry utilization including filling, transport spreading and brokerage is 3200-6800 Won/㎥ in accordance with the transport distance.
우리나라 국민의 연간 진단용 방사선 검사 건수는 매년 증가하고 있으며, 특히 의료 피폭의 절반이상을 차지하는 CT검사에 대한 각별한 주의가 요구된다. 본 연구에서는 현재 CT검사 중 가장 많은 부분을 차지하는 두부 CT에서 CT Number, Noise, Uniformity를 유지하면서 수정체 부분의 입사표면선량(ESD)을 줄이기 위해, 현재 사용하고 있는 Bismuth 차폐체와 Aluminum 6mm, Silicone 22mm를 비교 실험하였다. 실험 결과 IOML에 평행한 나선형 scan과 고식적 scan에서 차폐체를 사용하지 않을 때의 선량보다 각각 Bismuth 26.41%, 17.52%, Aluminum 18.24%, 9.39%, Silicone 19.47%, 14.39% 감소되었다. 물의 CT Number, Noise, Uniformity 항목에서 Bismuth 차폐체의 경우 팬텀영상 검사 기준을 초과하였으며, Aluminum, Silicone의 경우는 기준내에 포함되었다. 화질의 변화를 줄이면서 차폐의 효과를 보고자 할 때 가공성이 좋고 구입하기 쉬운 Silicone을 이용한 차폐체가 도움이 되리라 생각한다.
시료중의 방사능 분포를 영상으로 획득할 수 있는 2차원 디지털 방사선 검출기인 Imaging Plate(IP) 검출기는 주로 산업용 라디오그라피, 의료진단, X-선 회절실험 등에서도 광범위하게 사용되고 있다. 본 연구에서는 IP 검출기의 여러 종류의 방사선에 대한 높은 감도 우수한 공간 분해능, 넓은 선형범위와 스크린의 높은 균질성을 이용하여 시료중의 방사능을 측정할 수 있는 가능성에 대해 조사하였다. 먼저 IP 검출기를 이용하여 면적선원의 표면균질도 측정에 적용하였다. 상용 기준 면적선원$(^{241}Am)$의 방사능 분포에 대한 영상을 얻어서 표면 균질도를 비 파괴적이고 신속하게 측정하였다. 다음으로 IP 검출기를 극저준위 방사능 측정에 적용하여 방사능 측정가능성에 대해 연구하였다. 이를 위해 IP 검출기의 스크린 균질도, 배경방사선 차폐효과, 선형범위 조사, fading 시간을 조사하였다. 극저준위 방사능 측정을 위해 감자 바나나 무 당근에 포함되어 있는 $^{40}K$ 자연방사능을 선택하여 측정하였다. 기준선원을 사용하여 IP 효율교정을 수행하였다.
벨 디스크(Bell disc, 오토마이저 Atomizer)를 사용한 회전식 도장기술은 뛰어난 도료 전달효율, 도장 패턴 및 입자크기의 균일성, 스프레이 건 방식에 비해 적은 압축공기 사용량 등의 장점이 있다. 또한 회전식 분무기는 모든 페인트 재료에 적용할 수 있고 자동차 연속도장 같은 대규모 도장이 필요한 환경에 적합하다. 도장기기의 성능과 밀접하게 관계된 도장품질은 벨 디스크 표면설계에 따른 액적 크기와 균일성에 의해 결정된다. 따라서 이번 연구는 도료의 점성, 밀도, 표면친화도 등의 염료 특성이 고려된 작동하는 벨 디스크의 회전수, 직경, 표면의 각도, 무화시의 박막두께에 대한 모델링을 시행하여 표면설계 방법의 기초를 수립하였다.
Establishing and maintaining optimum lamp operating temperature is critically important in backlight systems for large area displays. The information presented in this paper is based upon work completed for a tiled 37.5" AM LCD, plus projections for a 37.5", 42" & 50" monolithic display. Due to the size of the units, a requirement for highly collimated light and a requirement for high brightness, >550 nits at the display surface, significant wattage is required which generates high heat levels in the backlight display assembly and potentially, at the display rear surface. Uniformity of illumination becomes an important element in the system design because of the large area involved.
Electroless Ni and Cu platings were conducted on $B_4C$ and SiC. In the electroless Ni plating, the deposition rate on $B_4C$ was higher than on SiC. However, the electroless Cu deposition occured with high deposition rate regardless of the carbide substrates used in this study. Uniformity of the deposits was better in the electroless Cu deposition than in the electroless Ni deposition. In the topographies of the electroless depositions, Ni deposits have grown as colony, whereas Cu deposits have grown as fine individual grains.
시뮬레이션을 활용하여 ABS 수지상의 전해도금에서 음극 보조물에 의한 도금 두께 변화를 관찰하였다. 분극 실험 및 효율 측정실험을 통하여 시뮬레이션 입력 데이터를 산출하였으며, 음극 보조물은 제품형상에 따라 최적으로 설계되어야 도금 두께 균일화가 가장 높은 것을 시뮬레이션을 통하여 알 수 있었다. 시뮬레이션을 활용하여 설계되어진 음극 보조물을 실제 제품에 적용한 결과 음극 보조물을 적용하기 전에 비하여 도금 두께균일성이 증가하였고, 그로 인하여 표면 크랙현상이 개선되었다.
In order to suppress the current crowding in light emitting diodes (LEDs) grown on sapphire substrate, the effect of nonuniform contact resistivity between TME layer and p-GaN layer on the LED surface was theoretically investigated. The analysis results showed that current crowding occurring around p-electrode could be considerably improved, which in turn would be helpful to improve the electrostatic discharge (ESD) characteristic.
플라즈마 밀도, 전자 온도, 쉬스 전압이 플라즈마 디웨팅으로 나노 분말 어레이를 제작할 때에 끼치는 영향을 연구하였다. 플라즈마 변수를 조절하여 기판에 입사하는 이온 충돌 에너지가 높은 조건에서는 디웨팅 시에 홀이 상대적으로 많이 생성이 되어 균일한 구리 나노 분말이 생성되었고, 반대의 경우에는 디웨팅 시 홀이 적게 생성되어 크고 작은 나노분말이 혼재해 있는 불균일한 구리 나노 분말 어레이가 형성되었다. 따라서 이온 충돌 에너지를 조절하면 구리 나노 분말의 균일도를 조절할 수 있다.
반도체 웨이퍼 패키지 공정에는 솔더 범프용으로 주석-은 합금 도금액이 사용되어 왔다. 최근, 주석-은 도금 피막중의 은 함량의 불균일성, 불용성 양극의 사용에 의한 전압 상승. 은의 도금 치구에의 석출, 리플로 후의 보이드의 형성 등의 문제로 인하여 주석 단독 금속 도금에 의한 범프 형성이 실용화되었다. 본 연구에서는, 범프용 주석 도금액에서의 전류밀도, 금속이온의 농도, 유리산의 농도 및 첨가제의 농도가 범프 두께 균일성에 미치는 영향을 조사하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.