• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.31-35
• /
• 2011

For high efficiency of Si-cells, Si wafers were textured by the KOH and NaOH etching solution to decreas the reflectance at surfaces of the cells. The textured surfaces were shown various types such as isotropic and anisotropic depending on the etching solution. The reflectance at sample of an anisotropic form with pyramid type was lower than that of isotropic form. The surface with isotropic form of general tiny circles on the surface increased the efficiency, however, the reflectance of it was increased. The efficiency was increased on surface with low roughness.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2001년도 High Temperature Superconductivity Vol.XI
• /
• pp.27-27
• /
• 2001

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.21-27
• /
• 2015

We carry out experiments to characterize textured bearing steel with varying hole density and depth. Textured surface is believed to reduce the friction coefficient, and improve performance and wearing caused by third-body contact. We employ three lubrication regime conditions based on the Stribeck curve: boundary lubrication, mixed lubrication, and hydrodynamic lubrication. Ultrasonic machining is an untraditional machining method wherein abrasive grit particles are used. The hammering process on the work piece surface by abrasive provides the desired form. In this study, we create multi-holes on the bearing steel surface for texturing purposes. Holes are formed by an ultrasonic machine with a diameter of 0.534 mm and a depth of about 2-4 mm, and they are distributed on the contact surface with a density between 1.37-2.23%. The hole density over the surface area is an important factor affecting the friction. We test nine types of textured specimens using four times replication and compare them with the untextured specimen using graphs, as well as photographs taken using a scanning electron microscope. We use Analyzes variant in this experiment to find the correlation between each pair of treatments. Finally, we report the effect of hole density and depth on the friction coefficient.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.426.1-426.1
• /
• 2014

For high performance thin film solar cells, texturing surface, enhancing the optical absorptionpath, is pretty important. Textured ZnO:Al transparent oxide layer of high haze is commonly used in Si thin film solar cells. In this paper, novel deposition method for aluminum doped zinc oxide (ZnO:Al) on glass substrates is presented to improve the haze property. The broccoli structure of ZnO:Al layer was formed on chemically etched glass substrates, which showed high haze value on a wide wavelength range.The etching condition of the glass substrates can change not only the haze values of the ZnO:Al of in-situ growth but alsothe electrical and optical properties of the deposited ZnO:Al films.The etching mechanism of the glass substrate affecting on the surface morphology of the glass will be discussed, which resulted in variation of texture of ZnO:Al layer. The optical properties of substrate morphology were also analyzed with EDS and FTIR results. As a result, the high haze value of 85.4% was obtained in the wavelength range of 300 nm to 1100 nm. Furthermore, low sheet resistance of about 5~18 ohm/sq was achieved for different surface morphologies of the ZnO:Al films.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권2호
• /
• pp.20-23
• /
• 2008

[ $La_2Zr_2O_7$] (LZO) buffer layers were deposited on biaxially textured Ni-W substrates by chemical solution deposition method (CSD). In this study, the effect of $B_2O_3$ addition on texture and surface roughness of LZO films was investigated. The alkoxide-based precursor solution was employed to synthesize the precursor solution of LZO and the solution was coated on biaxially textured Ni-W substrates and subsequently annealed at $900^{\circ}C$ for crystallization. The pure LZO film without $B_2O_3$ addition showed a (222) reflection in the X-ray diffraction (XRD) profile. The intensity of (222) reflection was enhanced and more rough surface was obtained after further repetition of coating. Contrary to this, the LZO film prepared by $B_2O_3$ added precursor solution shows well-developed (400) reflection peak in the XRD profile and excellent biaxial texture (${\Delta}{\theta}=4.3^{\circ}$, ${\Delta}{\phi}=6.8^{\circ}$). The surface roughness of LZO films were also improved by addition of $B_2O_3$ even after multicoating ($R_{rms}{\sim}3.1nm$). It was shown that the LZO film with smooth surface and biaxial texture was grown on the biaxially textured Ni-W substrates with addition of $B_2O_3$ in the precursor solution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.597-598
• /
• 2010

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.115-119
• /
• 1999

Ba$_2Cu_3O_{7-{\delta}}$ (YBCO) thin films were deposited by pulsed laser deposition using differently prepared targets: One was a conventionally solid-state sintered (SSS) target and the other was a modified melt-textured grown (MTC) target. Compared with SSS targets, MTG targets showed a well-connected microstructure consisting of much larger grains and the surface was Bess roughened with the cumulative laser incidence. YBCO films deposited from MTC targets showed a denser and smoother surface of the basal film than the case of SSS targets. The investigations of ${\alpha}$-axis outgrowths in the films indicated that the deposition using MTG targets would result in a more homogeneous and stable film growth as compared to the SSS targets. Also, TEM analysis revealed that the film deposited from MTG targets had a less granular microstructure that would reduce weak-link effects in the film.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권2호
• /
• pp.5-10
• /
• 2002

Deposition condition of NiO that is one of Possible buffer layers for YBCO coated conductors was studied. NiO was deposited on textured Ni substrates by a MOCVD (metal-organic chemical vapor deposition) method. The degree of texture, and the surface roughness were analyzed by X-ray Pole figure, atomic force microscope and scanning electron microscope. The (111) and (200) textures were competitively developed , depending on an oxygen partial Pressure(PO2) and deposition temperature (Tp). The (200) textured NiO layer was deposited at Tp=450~47$0^{\circ}C$ and PO2= 1.67 Torr Out-of-Plane ($\omega$-scan) and in-plane ($\Phi$-scan) textures of the (200) NiO films were as good as 10.34$^{\circ}$ and 10.00$^{\circ}$ respectively The AFM surface roughness of NiO was in the range of 3~4.5 nm at PO2=0.91~3.34 Torr and at Tp=47$0^{\circ}C$ , and in the range of 3~13 nm at TP=450~53$0^{\circ}C$ and at PO2=1.67 Torr.

• 한국결정성장학회지
• /
• 제13권6호
• /
• pp.261-266
• /
• 2003

결정질 규소를 이용한 태양전지의 제조에 필요한 texture 식각 공정에 초음파를 적용하였다. 이 결과 $60^{\circ}C$에서 초음파를 적용하여 식각된 규소 기판으로 제조된 태양전지의 광전변환효율이 기존의 방식대로 $70^{\circ}C$에서 초음파 없이 식각된 규소 기판으로 제조된 태양전지의 광전변환효율보다 높았다. 이 결과는 규소를 이용한 태양전지의 제조에 필요한 식각공정에서 초음파를 적용하면 공정 온도를 낮출 수 있고 또한 사용되는 고가의 용액을 줄일 수 있어 전체적으로 태양전지의 제조 가격을 낮출 수 있는 가능성을 보여준다.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.58-63
• /
• 2016

This study presents the dynamic characteristics of an impinging droplet on hydrophobic and hydrophilic surfaces with various texture area fractions. The flat surface was fabricated by using the drilling technique to make micro-meter hole-patterned surfaces, which shows hydrophobic textured surfaces. Moreover, the hydrophilic textured surfaces were manufactured by anodizing technique on the micro-meter hole-patterned surfaces to generate multi-layer surfaces. Impinging droplet experiments were conducted for various hole-patterned surfaces, with changing impact velocity and texture area fractions. It is observed that an anodizing technique increases wettability by decrease in hole diameter on the textured surfaces. However, micro-drilled surfaces decreases wettability because the hole diameter was so large that air can be trapped under the holes. In addition, the maximum spreading diameter decreases with the texture area fraction for the micro-drilled surfaces because of decrease in wettability.