• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.398-405
• /
• 2014

Salt accumulation at soil surface is one of the most detrimental factors for crop production in reclaimed tidal land. This study was conducted to investigate the effect of capillary barriers beneath the soil surface on dynamics of soil salts at coarse-textured reclaimed tidal land. A field experiment was conducted at Saemangeum reclaimed tidal land for two years (2012-2013). Capillary barriers ($3.5{\times}12m$) were treated with crushed-stone, oyster shell waste, coal briquette ash, coal bottom ash, rice hull and woodchip at 40-60 cm depth from soil surface. Silage corn (Zea mays) was cultivated during the experimental period and soil salinity was monitored periodically. Soil salinity was significantly reduced with capillary barrier compared to that of control. Oyster shell waste was one of the most effective capillary barrier materials to control soil salinity at Saemangeum reclaimed tidal land. At the first growing season capillary barrier did not influence on corn growth regardless of types of the material, but plant biomass and withering rate of corn were significantly improved with capillary barrier at the second growing season. The results of this study showed that capillary barrier was effective on the control of soil salinity and improvement of corn growth, which indicated that capillary barrier treatment can be considered one of the best management practices for stable crop production at Saemangeum reclaimed tidal land.

• 한국지구과학회지
• /
• 제26권8호
• /
• pp.828-835
• /
• 2005

본 연구는 남한강 중류의 좌안에 분포하는 하성 고위면의 지형특성과 그 단구퇴적층을 모재로 발달한 토양특성을 밝히는데 있다. 조사토양인 적색토는 토양의 형태적, 물리 화학적 및 점토광물의 특성으로 보아 적색토로 분류된다. 토양특성과 고위면의 지형적 특성으로 보아 본 적색토는 제4기의 현재와는 다른 생물 기후환경차에서 탈규산화 작용과 적색토화 작용에 의하여 생성된 고적색토로 사료된다.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1514-1519
• /
• 2009

400nm 파장을 방출하는 GaN LED를 제조하여, n-GaN층과 p-GaN층의 위에 있는 ITO층 표면에 패턴을 만들어 광 추출 효율을 향상시켰다. 추가적으로, n과 p패드 아래와 칩의 바닥면에 각각 광반사 금속을 설치하였다. 광 추출 효율은 20mA에서 n-GaN의 텍스쳐링에 의해 20% 증가되었고 ITO의 텍스쳐링에 의해 18% 증가되었다. 표면 처리가 않된 LED와 비교해서 n-GaN와 ITO를 함께 표면 텍스쳐링 했을때의 광 추출 효율은 20mA에서 32% 증가되었다.

• 한국토양비료학회지
• /
• 제47권4호
• /
• pp.284-289
• /
• 2014

Farmers in highlands in South Korea pile up 20 to 30 cm of saprolites, mostly granite- or granite-gneiss-weathered materials, on surface of arable lands every three to five years to compensate eroded soil and sometimes to discontinue soil-borne diseases. Immediate increases of infiltration and percolation rates are expected with coarse textured saprolites while soil drainage becomes poorer in a long-term. In this study, we analyzed mineralogical characteristics and micro-morphology of plow pan to investigate processes making impermeable layers. Soil samples were collected from plow pan, usually located at approximately 20 cm soil depth and at the lower part of piled saprolites, in arable lands in Hoenggye 5-ri, Daekwanryeong-myeon, Gangwon-do (N37.7, E128.7) in which saprolites were added 2, 4, and 8 years ago; saprolites were transported from similar areas. The saturated hydraulic conductivity decreased over time. Based on soil thin section pedography, quartz and feldspar accounted for a majority of minerals. The size of feldspar decreased and macropores became filled with clay or silt particles over time, which implies that macropores were packed with particles weathered from feldspar. The X-ray diffraction (XRD) analysis indicated that intensity of feldspar decreased over time and the reverse was true for kaolinite and illite, indicating that feldspar and mica weathering induced formation of kaolinite and illite. Conclusively, deteriorated drainage by formation of impermeable layers in farms with piled saprolites was caused by accumulation of clay minerals such as kaolinite and illite in macropores; illite and kaolinite can be formed by weathering of mica and feldspar, respectively.

• Tribology and Lubricants
• /
• 제31권2호
• /
• pp.50-55
• /
• 2015

This study investigates the effects of a pattern of 200 μm dimples in a hexagonal array on tribological characteristics. A textured surface might reduce the friction coefficient and wear caused by third-body abrasion and thus improve the tribological performance. There are three friction conditions based on the Stribeck curve: boundary friction, mixed friction, and fluid friction conditions. In this experiment, we investigate the friction characteristics by carrying out the friction tests at sliding speeds ranging from 0.06 to 0.34 m/s and normal load ranging from 10 to 100 N. We create dimple surfaces for texturing by using the photolithography method. There are three kinds of specimens with different dimple densities ranging from 10% to 30%. The dimple density on the surface area is the one of the important factors affecting friction characteristics. Friction coefficient generally decreases with an increase in the velocity and load, indicating that the lubrication regime changes depending on the load and velocity. The fluid friction regime is fully developed, as indicated by the duty number graph. Fluid friction occurs at a velocity of 0.14-0.26 m/s. The best performance is seen at 10% dimple density and 200 μm dimple circle in the hexagonal array.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.7-11
• /
• 2010

단결정 실리콘 태양전지의 광학적 손실을 감소시키는 표면 텍스쳐링은 최종 셀의 효율을 향상시키기 위하여 매우 중요하다. 본 연구에서는 2-step texturing의 공정으로 기존의 텍스쳐링에서 이루어진 피라미드에 수 많은 sub-micrometer 사이즈의 구조를 형성시켰다. $AgNO_3$ 용액으로 웨이퍼 표면에 Ag코팅을 한 후, 그 웨이퍼를 다시 HF/$H_2O_2$ 용액으로 수십초 동안 식각을 거치게 된다. 결과적으로, 피라미드 위에 생성된 수 nm사이즈의 구조물들은 $AgNO_3$의 농도 및 식각 시간의 변화에 의해 그 크기와 굵기가 변화하는 것을 알 수 있었다. 웨이퍼의 표면이 2-step texturing에 의해 식각이 이루어지면 연잎의 거친 표면과 비슷해지고, 그 결과 평균 10% 이상의 반사율을 보이던 기존 웨이퍼에서 3% 이하의 낮은 반사율을 얻을 수 있었다. 이는 일반적인 텍스쳐링과 anti-reflection coating을 거친 웨이퍼의 반사율보다 낮은 결과이다.

• 한국지반공학회논문집
• /
• 제15권3호
• /
• pp.131-149
• /
• 1999

여러 연구들을 통하여 표면 거칠음 정도가 접촉면 전단력에 매우 중요함이 밝혀졌으며, 따라서 그 역할을 충분히 이해하기 위해서는 표면 거칠음 정도가 정확히 정량화 되어야 한다. 이 연구에서는 표면 형상을 정량화하기 위하여 일반적으로 사용되는 표면 거칠기 매개변수와 측정방법에 대하여 여러 참고문헌들을 검토하였다. 이것을 바탕으로 Normalized Roughness Parameter, $R_n$ (Uesugi and Kishida, 1986), Profile Roughness Parameter, $R_L$, 그리고 Surface Roughness Parameter, $R_n$(Dove and Frost, 1996)가 적합한 표면 거칠기 매개변수로 선택되었으며, 디지털 이미지 분석 시스템을 이용한 Optical Profile Microscopy(OPM) 방법을 표면 거칠음 측정방법으로 선택하였다 이 실험장비를 이용하여 일반적으로 사용되는 지오멤브레인의 표면과 표면 패턴을 대표하는, 표면이 매끄러운 것과 3가지 종류의 돌기형 HDPE 지오멤브레인을 사용하여, 전단 시험에 사용되지 않았던 지오멤브레인과 전단시험후의 지오멤브레인에 대한 표면 거칠음 정도의 정량화 작업을 수행하였다. 그 결과, $R_L과\; R_S$값은 이 연구에 사용된 지오멤브레인의 거칠음 정도를 충분한 측정범위로 표현할 수 있는 매개변수로 밝혀졌으나, $R_n$값은 충분히 표면 거칠음 정도의 차이를 표현하기에는 부족하게 매우 좁은 변화 범위를 나타내었다. 이 연구는 접촉면에서 표면 거칠음 정도가 접촉면 전단력에 미치는 영향을 조사하고자 우선적으로 표면 거칠음 정도의 정량화 작업을 연구한 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.243.2-243.2
• /
• 2016

Tungsten (W) is recently gaining attention as a potential candidate to replace Cu in semiconductor metallization due to its expected improvement in material reliability and reduced resistivity size effect. In this study, the impact of electron scattering at grain boundaries in a polycrystalline W thin film was investigated. Two nominally 300 nm-thick films, a (110)-oriented single crystal film and a (110)-textured polycrystalline W film, were prepared onto (11-20) Al2O3 substrate and thermally oxidized Si substrate, respectively in identical fabrication conditions. The lateral grain size for the polycrystalline film was determined to be $119{\pm}7nm$ by TEM-based orientation mapping technique. The film thickness was chosen to significantly exceed the electron mean free path in W (16.1 and 77.7 nm at 293 and 4.2 K, respectively), which allows the impact of surface scattering on film resistivity to be negligible. Then, the difference in the resistivity of the two films can be attributed to grain boundary scattering. quantitative analyses were performed by employing the Mayadas-Shatzkes (MS) model, where the grain boundary reflection coefficient was determined to be $0.42{\pm}0.02$ and $0.40{\pm}0.02$ at 293 K and 4.2 K, respectively.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.393-397
• /
• 2003

To investigate the effect of AIN c-axis orientation on the resonance performance of film bulk acoustic wave resonators, solidly mounted resonators with crybtallographically different AIN piezoelectric films were prepared by changing only the bottom electrode surface conditions. As increasing the degree of c-axis texturing, the effective electromechanical coupling coefficient ($\kappa$$\_$eff/)$^2$ in resonators increased gradually. The least 4 degree of full width at half maximum in an AIN(002) rocking curve, which corresponds to $\kappa$$^2$$\_$eff/ of above 5%, was measured to be necessary for band pass filter applications in wireless communication system. The longitudinal acoustic wave velocity of AIN films varied with the degree of c-axis texturing. The velocity of highly c-axis textured AIN film was extracted to be about 10200 n/s by mathematical analysis using Matlab.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.