• Journal of the Korean Institute of Gas
• /
• v.21 no.3
• /
• pp.17-25
• /
• 2017

Recently, the need of alternate energy resources is increasing due to the global warming issue. The natural gas buried in the extremely cold regions of Alaska and Siberia is of much interest these days. However, the construction standards are needed to be used in extremely cold regions. Particularly, more research work need to be carried out on the trench stability so that the safety of the workers is ensured and the damage to the construction machinery can also be reduced resulting in smaller construction period. In this study, the process for lowering of the pipelines of 30 and 40 in. diameters in the ground conditions (silt and peat) of Yakutsk, Russia was analyzed. The slopes of the ground surface were considered as $0^{\circ}$, $10^{\circ}$, and $20^{\circ}$ to be excavated in summer and winter. The analysis results show that the weight of pipelayer affects the trench stability. Numerical analysis was performed by considering the types of pipelayers, distance between the trench and pipelayer, and the distance between the pipelayers placed longitudinally along the trench. The results show that as the distance between the pipelayer and the trench decreases, the factor of safety of the slope decreases with an increase in the slope of the ground surface. When the slope of the ground surface was $20^{\circ}$, the breakout surface was anticipated to continue from the pipelayer to the trench boundary. In winter season, stability problem of the trench was not observed when the slope of the ground surface was less than $20^{\circ}$.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.19-26
• /
• 2003

The dispersion of recycled particulates in the complex coastal terrain containing Kangnung city, Korea was investigated using a three-dimensional non-hydrostatic numerical model and lagrangian particle model (or random walk model). The results show that particulates at the surface of the city that float to the top of thermal internal boundary layer (TIBL) are then transported along the eastern slope of the mountains with the passage of sea breeze and nearly reach the top of the mountains. Those particulates then disperse eastward at this upper level over the coastal sea and finally spread out over the open sea. Total suspended particulate (TSP) concentration near the surface of Kangnung city is very low. At night, synoptic scale westerly winds intensify due to the combined effect of the synoptic scale wind and land breeze descending the eastern slope of the mountains toward the coast and further seaward. This increase in speed causes development of internal gravity waves and a hydraulic jump up to a height of about 1km above the surface over the city. Particulate matter near the top of the mountains also descends the eastern slope of the mountains during the day, reaching the central city area and merges near the surface inside the nocturnal surface inversion layer (NSIL) with a maximum ground level concentration of TSP occurring at 0300 LST. Some particulates were dispersed following the propagation area of internal gravity waves and others in the NSIL are transported eastward to the coastal sea surface, aided by the land breeze. The following morning, particulates dispersed over the coastal sea from the previous night, tend to return to the coastal city of Kangnung with the sea breeze, developing a recycling process and combine with emitted surface particulates during the morning. These processes result in much higher TSP concentration. In the late morning, those particulates float to the top of the TIBL by the intrusion of the sea breeze and the ground level TSP concentration in the city subsequently decreases.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.5
• /
• pp.1-12
• /
• 2009

This research was initiated to investigate the revegetation characteristics under the seeding amount treatments of cool-season turfgrasses on the disturbed slope. 4 different seeding amounts of cool-season turfgrasses (0.0 $g/m^2$, 1.5 $g/m^2$, 3.0 $g/m^2$, 6.0 $g/m^2$) with the same seeding amounts of native woody (Rhus chinensis, Albizzia julibrissin) and herbaceous plants (Lotus corniculatus var. japonicus, Dianthus sinensis, Aster yomena) were treated with 3 replications on the experimental disturbed slope. Data such as soil hardness (mm), moisture content (%), surface coverage rate (%), the number of each germinating plant and plant height were analyzed. There were no statistic differences observed in the soil hardness and the soil moisture content while a significant difference was observed in the surface coverage rates. The surface coverage rates were higher in 3.0 $g/m^2$ and 6.0 $g/m^2$ plots compared to the rest two plots of cool-season turfgrasses. However, the emergence of native woody and herbaceous plants was relatively low in 3.0 $g/m^2$ and 6.0 $g/m^2$ plots of high seeding amounts of cool-season turfgrasses. This result indicated that high seeding amounts of cool-season turfgrasses could decrease the emergence of native woody and herbaceous plants. We concluded that 1.5 g~3.0 $g/m^2$ seeding amounts of cool-season turfgrasses was optimum level for the balanced emergence of cool-season turfgrasses, native woody and herbaceous plants in the viewpoint of the ecological disturbed slope revegetation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3C
• /
• pp.113-120
• /
• 2012

An actual slope failure was analyzed in residual soils at Jinju. Due to rainfall infiltration, the safety factor decreases in the unsaturated layers, since the effective stress and shear strength decrease. In this study, the effective stress is based on suction stress using soil water retention curve. Unsaturated properties were evaluated on soil water retention curve, hydraulic conductivity and shear strength with samples from the site. After infiltration analysis of unsaturated flow under the actual rainfall, the distribution of pore water pressure could be calculated in the slope layers. In the stress field of finite elements, an elastic analysis calculated total stress distribution in the layers and also shear stresses on the slip surface using elastic model. On the slip surface, suction stress and effective stress evaluated the shear strength. As a result, the factor of safety was calculated due to rainfall, which could simulate the actual slope failure. In particular, it was found that the suction stress increases and both the effective stress and the shear strength decrease simultaneously on the slip surface.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.193-200
• /
• 2000

Numerical analysis of slope stability is presented using slice method, static seismic analysis methods, and earthquake response analysis methods. Static seismic force is considered as 0.2g while vertical static seismic force is not considered in analysis. For earthquake response analysis, Hachinohe-wave is applied. Safety factor calculated using slice method for failure surface. Calculating methods are Bishop's method and Janhu's method. Static seismic analysis was applied using Mhor-Coulomb model and earthquake response analysis was applied using non-linear elastic model.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.526-528
• /
• 2003

There are some reports which are about measuring the discontinuity from 3D model of rock surface. To generate 3D model is mainly based on remote sensing technique like laser scanning and digital stereo photogrammetry. It is obtained the DEM of the rock slope using above techniques in this study, and examined a suitability and improvement of the photogrammetry for the rock slope by overlap the DEM. It seems that accuracy of DEM generated by photogrammetry technique is influenced by the geometry of rock and type of joint.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.129-137
• /
• 2006

In this research, we made a one and two-dimensional analysis of numerical data collected from the bend curvature of a bended river section. According to the result from the numerical analysis, the inflow ＆ output angle caused a water level deviation which increased with an increase of the flood discharge. From the water level deviation of our two-dimensional numerical model, we obtained the maximum slope of 6,67% when the inflow and output angle was 105 degrees and the flood discharge was 500 CMS. As for the right side, the differences with the one-dimensional numerical model were reduced when the angle was more than $90^{\circ}$. As for the left side the differences were reduced when the angle was more than $105^{\circ}$. For a river with more than 90 degrees bend curvature, a hydraulic experiment would be more appropriate than a numerical analysis.

• Structural Engineering and Mechanics
• /
• v.41 no.3
• /
• pp.339-348
• /
• 2012

The slope stability analysis is usually done using the methods of calculation to rupture. The problem lies in determining the critical failure surface and the corresponding factor of safety (FOS). To evaluate the slope stability by a method of limit equilibrium, there are linear and nonlinear methods. The linear methods are direct methods of calculation of FOS but nonlinear methods require an iterative process. The nonlinear simplified Bishop method's is popular because it can quickly calculate FOS for different slopes. This paper concerns the use of inverse analysis by genetic algorithm (GA) to find out the factor of safety for the slopes using the Bishop simplified method. The analysis is formulated to solve the nonlinear equilibrium equation and find the critical failure surface and the corresponding safety factor. The results obtained by this approach compared with those available in literature illustrate the effectiveness of this inverse method.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.407-418
• /
• 2003

It is necessary, in the light of the importance of long-term slope stability problem, to develop a simple method or tool which can figure out the possible failure surface resulting from weathering effect and other factors. The FBG(Fiber Bragg Crating) sensor system is used to estimate the correlations between the soil temperature and the slope behavior, and to find a failure surface in slopes effectively. This research is to seek for the correlation between the soil temperature distribution and the strain distribution of the reinforcing materials in an active zone by analyzing the data from the in-situ measurement so that the possible failure surface should be well defined based on the correlation. The zone of high temperature fluctuation can be regarded as one of the possible failure surface due to the weathering effect while the constant temperature depth of the ground, if exists, would not be relatively affected by the weathering process.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.82-91
• /
• 2009

Research was initiated to investigate vegetation characteristics of native ('Pureundle' and 'Sewon') and introduced ('Brilliant' and 'Midnight') Kentucky bluegrass (KB, Poa pratensis L.) varieties by soil-seed applying system on a cut-slope in May 17, 2008. There were no statistic differences observed in soil hardness and soil moisture content while significant differences were observed in surface coverage rate, height and disease occurrence in native and introduced KB varieties. The introduced 'Brilliant' KB was highest in the surface coverage rate from the early period of seeding to August 11, 2008. The surface coverage rate of introduced varieties were high when compared to native varieties in their early growth stage. But native varieties reached to equal surface coverage rate with the introduced varieties when three months after seeding. The height of 'Pureundle' and 'Brilliant' KBs were high compared with Midnight and Sewon KBs. 'Pureundle' and 'Brilliant' KBs were damaged by disease whereas there were no disease occurrence in 'Midnight' and 'Sewon' KBs. Probably, the disease occurrence was close related with the height of KBs not with native and introduced KB varieties. These results indicate that the growth of KB on a cut-slope are statistically affected by varieties in early growth stage of this experiment but reach equal rate between native and introduced KB varieties in three months after seeding. This growth characteristics implies the huge potential of native KB varieties seeding for cut-slope vegetation. Considering that native KB varieties are adapted to a environment and have no risk of causing disturbance to the ecosystem compared to the introduced KB varieties, the use of them as native varieties for a cut-slope vegetation can be increased.