• 한국주거학회논문집
• /
• 제10권1호
• /
• pp.75-84
• /
• 1999

The purpose of this study is to identify the characteristics of the thermal environment, and to analyze the relationship between the thermal reactions and the skin temperatures in the lying position in the radiant floor heating system. The results are as follows: 1) The globe temperature was nearly equal to the operative temperature in the room. 2) The floor surface temperature and the globe temperature were 26.4$^{\circ}C$ and 23.6$^{\circ}C$, respectively when the whole body temperature was at neutral point. 3) The mean temperature of the six skin parts was 31.3$^{\circ}C$ (cold thermal environment); 34.1$^{\circ}C$ (neutral thermal environment); 35.1$^{\circ}C$ (hot thermal environment).

• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.635-643
• /
• 2011

This study was investigated to evaluate the physiological responses on T-shirts manufactured with selected functional materials by body parts which were selectioned on the distribution of sweating and temperature change. Seven healthy men in twenties were participated in a climate chamber of $27{\pm}0.5^{\circ}C$ and $50{\pm}1%RHC$. Three kinds of T-shirts named 'D1', 'D2' and 'Poly' were used as experimental clothings. Four kinds of functional materials of quick absorbing/drying were used in all section in 'D1', but two kinds of functional materials used partially in 'D2'. 'Poly' T-shirts used only polyester. In an experimental schedule of 90 minutes, which were consisted of 'Rest', twice of 'Exercise' and twice of 'Recovery' periods, the subjects walked on a treadmill with 60% of $VO_2max$. As a physiological responses, the microclimate temperature, surface temperature(skin, clothing) and sweat rate were measured. Temperature regulation was kept well in 'D1' rather than other T-shirts. The quick absorbing/drying T-shirts showed its performance well as the exercise goes on the second half. With these results in mind, 'D1' will be more effective for long hours exercise such as climbing rather than short hours exercise.

• 대한본초학회지
• /
• 제22권2호
• /
• pp.45-50
• /
• 2007

objectives: We investigated the moisturizing and cooling effects of the cosmetic product with Scrophularia Buergeriana, Poria Cocos, Lonicera Japonica, Portulaca Oleracea and Ginko Biloba extract on human skin by using non-invasive instrument. Methods: We measured physiological effects after volunteers(female, n=5) applied the cosmetic product containing the extract of oriental herbs. The forearm skin moisturization was measured with $Corneometer^{\circledR}$ CM825 after 15min, 3hr, and 6hr. The forearm skin surface roughness was with Scanning electron microscopy after 15min, and 6hr. The face skin temperatures cooling and microcirculation effects were measured with ThermaCAMTM PM525 and LDl-Periscan PlM II after 15min, and 30min. Results: The forearm skin moisturization was imcreased 108% after 15min. The forearm skin surface roughness was decreased significantly after 15min. The face skin temperatures were cooling down to $30.7^{\circ}C$. The face skin microcirculation effect was normalized time-dependently. Conclusions: We concluded that cosmetic product containing the extract of Scrophularia Buergeriana, Poria Cocos, Lonicera Japonica, Portulaca Oleracea and Ginko Biloba had a moisturization effect and improving the surface roughness, temperature and microcirculation on the human skin.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.28-34
• /
• 2013

For the senses of beauty and texture, internal components of small passenger cars are manufactured by texturing plastic with drawplate but those of deluxe passenger cars are manufactured by bonding pre-embossed skin to the surface of drawplate. As the pre-embossed skin is bonded at high temperature and pressure, the pattern of skin is distorted. The corner part is hardened and its dimension tolerance is changed by resulting in the increase with its defective rate. This study provides the method to design and manufacture the door trim track by vacuuming the non-patterned skin to upper-side drawplate which forms the pattern of descending skin. It is pressed to the plastic product with hot-press method and the damage of bossed-pattern is prevented. Valuation in this study has been done by analyzing, designing and experimenting method.

• 한국어류학회지
• /
• 제23권2호
• /
• pp.145-149
• /
• 2011

인위적 수온변화에 의한 미꾸라지 피부의 점액세포 반응을 확인하기 위해 고온($32^{\circ}C$)과 저온($4^{\circ}C$)에 적응시킨 실험군의 표피조직을 실온($18^{\circ}C$)의 대조군 집단과 비교 분석하였다. 그 결과, 고온적응 설험군에서는 대조군과 유의한 차이를 보이지 않았으나, 저온적응 실험군에서는 등, 체측, 후두부의 점액세포 수와 크기가 현저하게 증가하는 경향을 보였다(P<0.01). 또한 저온적응 실험군의 수온을 증가시켜 상온에서 재 적응시킨 결과에서도 피부 정액세포의 수와 크기가 현저히 감소하는 경향을 보였다(P<0.01). 따라서 미꾸라지 피부의 점액세포가 저온에 매우 민감하게 반응하는 양상은 어류의 조직학적 환경지표로서 유용할 것으로 여겨진다.

• 한국의류학회지
• /
• 제32권7호
• /
• pp.1129-1136
• /
• 2008

The gaiter is one of the personal protective equipments worn in various industrial sites. This study was performed on humans to investigate the physiological strain of wearing gaiters and to compare control gaiters that are currently on the market and new gaiters that are developed for alleviating heat stress. Experiments were conducted in a climatic chamber of WBGT $30.0\pm0.7^{\circ}C$ under five differed experimental conditions: None, Control A, Control B, New A, New B. The results were as follows. The temperature inside gaiters was significantly lower in both New A and New B than in both Control A and Control B and the difference between news and controls was 1$^{\circ}C$ (p<.01). The humidity inside gaiters in both New A and New B were higher than that in Control A, and lower than that in Control B (p<.01). The outermost surface temperature of the gaiter was the lowest in None and it increased in the following order: New B < New A < Control A < Control B. Mean skin temperature was higher by 0.14$^{\circ}C$ in wearing gaiters than in no gaiters. Skin temperatures in lower body were lower in Control than in New and skin temperature in upper body were higher in Control than in New (p<.01). Local sweat rate, total weight loss and subjective sensations did not show a significant difference according to the gaiters. It was concluded that wearing gaiters affected distribution of skin temperature and local sweat rate.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.74-77
• /
• 2004

Porous membranes were prepared via thermally induced phase separation (TIPS) of (ethylene-co-vinyl alcohol) (EVOH)/glycerol mixtures. The liquid-liquid (L-L) phase boundaries are shifted to higher temperature when the ethylene contents in EVOH increase. Moreover, the kinetic study proved that the growth of droplets formed by the general liquid-liquid (L-L) phase separation obeyed a power-law scaling relationship in the later stage of spinodal decomposition (SD). A new phase separation mechanism was presented, in which the L-L phase separation could be resulted from the crystallization. The hollow fiber membranes were prepared. The membranes showed asymmetric structures with skin layer near the outer surface, the larger pores just below the skin layer and the smaller pores near the inner surface. The effect of ethylene content (EC) in EVOH, cooling water bath temperature and take-up speed on membrane performance was investigated.

• 한국생활과학회지
• /
• 제12권5호
• /
• pp.747-754
• /
• 2003

The actual clothing conditions were surveyed to diagnose clothing condition of Korean female in the view point of the adaptation to the thermal environment according to seasonal changes. Then, clothing microclimate, physiological responses, and subjective sensation were investigated through wearing trials on human body in climatic chamber based on the results from the survey. Factors to evaluate validity of clothing condition were clothing weight, clothing microclimate, physiological response of human body, and subjective sensation. The results were as follows: 1. Clothing weight per body surface area of the season was $856g/m^{2}$, $439g/m^{2}$ in summer, $630g/m^{2}$ in fall, and $1184g/m^{2}$ in winter. Cold - resistance of Korean female in office was superior to Japanese, inferior to residents of rural areas of Korea, and similar to male in office. However, in heat - resistance, female in office was inferior to residents of rural areas of Korea. 2. In spring, fall, winter, clothing microclimate temperature was a little higher than that in summer. Therefore, it was not a desirable wearing condition even though the clothing microclimate was comfortable zone. 3. Mean skin temperature of female in office was including within the range of Winslow's comfortable zone, but the range of comfortable zone in mean skin temperature of female was more narrow than Winslow's. Thus, it has problem for female to adaptation to thermal environment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.977-980
• /
• 2004

Metalworking fluids (MWFs) are fluids used during machining and grinding to prolong the life of the tool, carry away debris, and protect the surfaces of work pieces. These fluids reduce friction between the cutting tool and the work surface, reduce wear and galling, protect surface characteristics, reduce surface adhesion or welding and carry away generated heat. Workers can be exposed to MWFs by inhaling aerosols (mists) and by skin contact with the fluid. Skin contact occurs by dipping the hands into the fluid, splashes, or handling workpieces coated with the fluids. The amount of mist generated (and the resulting level of exposure) depends on many factors. To reduce the environmental pollution wastes and the potential health risks associated with occupational exposures to MWFs, it is required to establish optimum MWFs supply method and condition with minimum quantity in all over the mechanical machining field including high-speed type heavy cutting process.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1703-1711
• /
• 2000

Microstructural morphology of molded composites of thermotropic liquid crystalline polymer(LCP) and polyamide 6 (PA6) has been studied as a function of epoxy fraction. Injection-moulding of a thin composite plaque at a temperature below the melting point of the LCP fibrils by suing the extruded LCP/PA6 pellets produced multi-layered structures: 1) the surface skin layer with thickness of 65-120 ym exhibiting a transverse orientation, 2) the sub-skin layer with an orientation perpendicular to the surface skin, i.e. in the flow direction, 3) the core layer with arc-curved flow patterns. Similar microstructural orientations were observed in the respective layers for the composite plaques with different fractions of epoxy.