• 한국의류학회지
• /
• 제36권10호
• /
• pp.1050-1057
• /
• 2012

This study helps develop a cool body armor that maintains a tight-fit configuration to the body surface and evaluates the performance of newly developed body armor in a wear test. Three types of body armor were used for evaluation. One was a tight fitting body armor that was constructed to improve the degree of fit and ease of movement for Korean soldier using 3D technology. Another was ventilating body armor with attached spacers on the shoulder to reduce the thermal stress on the soldier. The third was a prevailing body armor produced by a Korean body armor company. In order to evaluate the performance of the body armor, a human wear test, a thermal mannequin test, and computational fluid dynamics (CFD) were executed. Five subjects participated in the wear test. Subjective wear sensation, total amount of sweat and dynamic change of clothing microclimate were observed during and after exercise on a treadmill; subsequently, it was found that subjects rated tight fitting body armor and ventilating body armor lighter, drier, and easier to move than the conventional body armor (p<.05). Total amount of sweat was the least in the case of ventilating body armor. The thermal resistance and vapor resistance of the ventilating body armor were improved remarkably. In addition, the skin temperature of the ventilating body armor with spacers was lower than the tight fitting body armor by at least $1^{\circ}C$ in the CFD result. It is noted that thermal-wet comfort of the 3D body armor with ventilating feature is superior to the conventional body armor, especially when the ventilating channel is not closed due to a backpack.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.652-659
• /
• 2011

항공기 IR(Infrared; 적외선) 피탐지성 감소 연구를 위해 후방동체 주위 열유동장과 IR 신호를 예측하는 시스템을 구축하였다. 아음속 무인전투기(UCAV)를 대상 항공기로 고려하여 가상 임무 설정 및 성능해석을 통해 가상 엔진을 선정하였다. 또한 각 임무를 만족시키는 노즐을 설계한 후, 고속 고온 열유동장 CFD 해석코드를 이용하여 최대 출력에서의 노즐 내부 유동을 해석하였다. 예측된 노즐 표면 및 후방 동체의 온도는 고체표면 복사 열교환 및 신호 예측코드와 연계시키는 시스템과 연동시켜 최종적으로 IR 신호를 계산하였다. IR 밴드 및 관찰 각도에 대한 IR 신호의 변화를 분석하여 IR 감소설계를 위한 정성적 정보를 도출하였다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.152-162
• /
• 2005

Coolant rubber hoses for automobile radiators can be degraded and thus failed due to the influence of contacting stresses of air and coolant liquid under the thermal and mechanical loadings. In this study, test analysis was carried out for evaluating the degradation and failure mechanisms of coolant hose materials. Two kinds of EPDM rubber materials applicable to the hoses were adopted: commonly-used ethylene-propylene diene monomer(EPDM) rubbers and EPDM rubbers with high resistance against electro-chemical degradation (ECD). An increase of surface hardness and a large reduction of failure strain were shown due to the formation of oxidation layer for the specimens which had been kept in a high temperature air chamber. Coolant ageing effects took place only by an amount of pure thermal degradation. The specimens degraded by ECD test showed a swelling behavior and a considerable increase in weight on account of the penetration of coolant liquid into the skin and interior of the rubber specimens. The ECD induced material softening as well as drastic reduction in strength and failure strain. However EPDM rubbers designed for high resistance against ECD revealed a large improvement in reduction of failure strain and weight. This study finally established a procedure for reliability analysis and evaluation of the degradation and failure mechanisms of EPDM rubbers used in coolant hoses for automobile radiators.

• 대한화장품학회지
• /
• 제25권1호
• /
• pp.37-54
• /
• 1999

분체 특성으로 매끄러운 사용감과 피부 부착력이 우수하며 판상의 체질안료보다 유동성이 큰 실리카 미립자를 제조하기 위해 실리카 조대입자의 제조와 이의 다단계 분쇄 공정을 이용하여 여러 층의 terrace를 가지고 있는 판상 체질안료의 표면과 다른 평골한 표면 상태의 평탄면을 가지는 실리카 미립자를 제조하였다 여기에서 제조된 실리카 단일 입자를 모입자로 사용함으로써 이산화티탄의 균일침전반응법에 의해 제조된 복합입자는 평탄면을 가지게 되어 유동성의 조절과 부착력의 조절에 의해 도포 층이 균일하게 형성되는 분체 특성을 가지고 있다 본 실험에서 가장 적합한 침전 반응의 조건은 요소농도가 0.2~0.3mol/$\ell$이고 황산농도가 0.3~O.4mol/$\ell$이고 황산티타닐의 농도가 0.007~0.015mol/$\ell$며, 반응온도는 60~8$0^{\circ}C$였다 이와 같은 균일 침전 반응의 조건에 따라 초미립자상 이산화티탄의 피복량과 피복된 초미립자의 입경을 제어함으로써 분체의 광학적 특성을 조절하였고, 그 결과 피부 도포 시 피부색에서 600nm이상의 장파장 영역에서 반사율을 증가시켜 강한 피부색 tone을 표현할 수 있도록 하였다.

• 농업과학연구
• /
• 제29권1호
• /
• pp.24-31
• /
• 2002

본 연구는 수출용 딸기에 대한 실용적 $CO_2$ 처리방안을 도입하여 수출단계에서 과실 품질에 미치는 영향을 조사하기 위하여 실시하였다. $CO_2$ 처리에 따른 경도 증진 효과는 과숙한 과실에서 더욱 컸으나 과실의 실제적인 경도는 미숙한 과실에서 높아 미숙과에 대한 처리 효과가 실용적인 가치가 있었다. 처리조건은 수확한 과실을 예냉실에 넣어 냉각시키고 15% 이상의 $CO_2$에 4시간 이상 노출시키는 것이 바람직 하였으며 $CO_2$ 처리의 잔류효과는 모의 선적 및 소매과정까지 유지되었다. 그러나 과숙한 과실에서는 소매과정을 부여할 때 과피면이 검붉게 변하여 상품가치를 상실하였다. 본 연구 결과에서 농가 소유의 소형 저온실을 활용하여 간편하게 $CO_2$를 처리할 수 있으므로 수출은 물론 국내 유통에서 품질 증진을 위한 수확 후 처리기술로 활용 가능성이 있었다.

• Journal of Ginseng Research
• /
• 제46권3호
• /
• pp.367-375
• /
• 2022

Background: Short-term hydroponic-cultured ginseng (sHCG), which is 1-year-old ginseng seedlings cultivated for 4 weeks in a hydroponic system, is a functional food item with several biological effects. However, the optimal extraction conditions for sHCG, and the bioactivity of its extracts, have not been evaluated. Methods: Chlorogenic acid (CGA) and ginsenoside contents were evaluated in sHCG, white ginseng (WG), and red ginseng (RG) using high-performance liquid chromatography. Response surface methodology (RSM) was used to optimize the extraction conditions (temperature and ethanol concentration) to maximize the yield of dry matter, CGA, and four ginsenosides (Re, Rg₁, Rb₁, and Rd) from sHCG. The optimal extraction conditions were applied to pilot-scale production of sHCG extracts. The expression levels of tumor necrosis factor (TNF)-α/interferon (IFN)-γ-induced thymic and activation-regulated chemokines (TARC/CCL17) were measured after treatment with sHCG, WG, and RG extracts, and the effects of their bioactive compounds (CGA and four ginsenosides) on human skin keratinocytes (HaCaTs) were evaluated. Results: CGA and four ginsenosides, which are bioactive compounds of sHCG, significantly inhibited TNF-α/IFN-γ-induced TARC/CCL17 expression. The optimal sHCG extraction conditions predicted by the RSM models were 80 ℃ and 60% ethanol (v/v). The sHCG extracts produced at the pilot scale under optimal conditions greatly alleviated TNF-α/IFN-γ-induced TARC/CCL17 production compared with WG and RG extracts. Conclusions: Pesticide-free sHCG extracts, which contain high levels of CGA and the ginsenosides Re, Rg₁, Rb₁, and Rd as bioactive compounds, may have therapeutic potential for atopic diseases.

• 한국생활과학회지
• /
• 제11권3호
• /
• pp.273-285
• /
• 2002

Three materials for sport underwear were manufactured by order for study, and among them, suitable material in order to perform an experiment on the effect of wearing was adopted. The results are as follows: The result of wearing an experimental clothes for sports manufactured as a foundation-type underwear for sports showed that if the same compositional materials were applied, laminating material had higher rate than that of others in the amount of sweat. Concerning relative humidity in clothes and the amount of sweat absorbed in clothes among the two kinds of materials which were produced by laminate, material 2(nylon+modal) was statistically exerts higher influence on the amount of sweat. The humidity in clothes keeps the optimal condition of 59.8%, and breast part showed the highest relative humidity. The material 2(nylon+modal) showed the highest comfortableness, the sense of warmth, humidity and voluminousness, and the sense of pressure. Follow-up survey revealed that in case of material 2, higher amount of sweat than that of the group objects in its early phase, and the amount of sweat varies from individuals. The temperature in clothes of folded parts of experimental clothes and maximum surface temperature was equivalent to that of average skin. With the lapse of time, the weight decreased of 11.03% in maximum, and 3.12% in minimum. The amount of change in the girth was greater in part of body frame than that of limbs, and especially, navel and waist part showed high decrease, and upper breast, breast and the largest part of abdomen showed relatively low decrease. The above experiment revealed that materials for suitable to the underwear for sports for loss of weight by an exercise should be made of doubled-nylon and modal, along with the laminate processing, which heightens the amount of sweat. Thus, wearing an experimental wear gave satisfaction in the view of the beauty of appearance as it did not discharge flowing secretion to the outside at the time of exercise.

• 한국축산시설환경학회지
• /
• 제1권1호
• /
• pp.9-19
• /
• 1995

This study was carried out to investigate the effect of sawdust bedding barn on manure handing, management labour and physiological aspect of dairy cows, and then to establish the criteria on the optimum utilization method of sawdust bedding barn. 46 tie stall barns and 49 sawdust bedding barns were surveyed to cmopare the milk productivity between two different barns, and also 5 tie stall barns, 15 sawdust bedding barns and 1 rice hull bedding barn were selected to study the utilization situation of sawdust barn in Kyung-Ki province area. The major results obtained were as follows; 1. The roof material of sawdust barn were consisted of 66% vinyl house, 23% PVC light and 11% slate and galvanum coated tin. Most of the floor structure was earth ground with the rate of the approximately 82%. 2. The average occupied area of sawdust bed per cow was 15.2 $m^2$, depth that 30 cm and the utilization period was 12 months. 3. Milk Yield was significantly higher at sawdust barn than at tie stall barn(P<0.01). Bacterial and somatic cell count in raw milk were less at the sawdust barn than in tie stall barn. However, there was not significance difference between two barns. 4. The labour hour needed to cow management in the sawdust barn was approximately 48% of that of tie stall barn. 5. The temperature and moisture content measured in sawdust bed were closely affected by seasonal ambient temperature. The skin and hair of cow were much cleaner at the PVC light roofed sawdust barn than any other roof materials. 6. The additives used for improving of fermentation did not show any effect on temperature and moisture content in sawdust bed. When the ambient temperature was $30.4^{\circ}C$, the surface temperature of measured 1 cm above the sawdust bed was $12.2^{\circ}C$ lower and the temperature of 100 cm above the sawdust bed was $2.4^{\circ}C lower under shading net facility than that of vinyl roofed one.7. The hoof length of miking cow was 7.95 cm in tie stall and 9.19 cm in sawdust barn with high significance (P<0.01). And disease occurence such as mastitis and foot-rot tended to decrease in the sawdust barn. 8. The number of total bacteria and coliform bacteria were less in the sawdust bed compared with earth ground resting area. And a parasite strongyloides papillosus was detected but without any infected cow. 9. The nitrate($NO_3N$) content in non-roofed earth ground resting area and earth ground under the sawdust bed was likely to pollute the ground water. 10. In economic point of view, rice hull bedding barn was the cheapest among different systems. And in the sawdust bedding barn PVC light + slate roofed barn was most desirable, and vinyl roofed one the least.

• 한국어류학회지
• /
• 제2권2호
• /
• pp.169-181
• /
• 1990

전북(全北) 김제군(金堤郡) 죽산면(竹山面) 죽산리(竹山里) 죽산천(竹山川)서 채집(採集) 가시납지리친어(親魚)를 사육(飼育)하던 중 1989년(年) 4월(月) 11일(日)에 인공수정(人工受精)을 시켜 난발생(卵發生), 자어(仔魚)의 발육(發育) 및 자어(仔魚)의 표피상돌기(表皮上突起)를 관찰(觀察)한 결과(結果)는 다음과 같다. 완숙란(完熟卵)의 형태(形態)는 동물극(動物極)쪽이 조금 뾰족하고 그 주위(周圍)에 둥그스럼한 3∼4개(個)의 돌기(突起)가 있으며 그 중심부(中心部)에 난문(卵門)이 있다. 난막(卵膜)은 얇으나 제리상(狀)인 점액물질(粘液物質)로 덮여 있어서 흐리고 반투명(半透明)이며 약(弱)한 점착성(粘着性)이 있다. 전장(全長) 89.40 mm인 자친어(雌親魚)로부터 배를 눌러 얻은 완숙란(完熟卵)의 크기는 $2.09{\pm}0.04{\times}1.26{\pm}0.02mm$로 한번에 평균(平均) 304립(粒)이 얻어졌다. 자어(仔魚)의 발육형태(發育形態)는 대체(大體)로 큰납지리와 유사(類似)했다. 즉(卽) 자어(仔魚)의 표피상돌기(表皮上突起)는 몸 전체(全體)의 표피상(表皮上)에 사면형돌기(斜面型突起)가 분포(分布)되었고 S자형(字型)으로 몸을 꿈틀거리는듯한 운동(運動)을 한다. 이러한 형질(形質)은 납지리, 큰납지리, Pseudoperilampus typus, Acheilognathus longipinnis등(等)과의 공유형질(共有形質)인 점(點)으로부터 이들 종(種)과 근연관계(近緣關係)에 있다고 추정(推定)된다. 또 위의 4 종중(種中) 큰납지리를 제외(除外)한 3 종(種)을 모두 추계산란형(秋季産卵型)인데 본(本) 종(種)과 큰납지리는 봄에서 초여름에 걸쳐서 산란(産卵)을 한다. 따라서 본(本) 종(種)과 큰납지리의 개체발생(個體發生)이 추계산란형(秋季産卵型)의 개체발생(個體發生)과 유사(類似)한 점(點)이 많다는 사실(事實)은 추계산란형(秋季産卵型)의 출현(出現)을 고찰(考察)하는데 매우 중요(重要)하다고 생각된다.한편 본(本) 종(種)과 큰납지리는 배기기조수(背??條數) 차리외(差異外)에도 완숙란(完熟卵)의 형태(形態) 차리(差異) 그리고 치어(稚魚)의 배기(背?)의 흑색(黑色) 반문(斑紋)이 큰납지리는 타원형(楕圓形)인데 본(本) 종(種)은 삼각형(三角形)인 점등(點等)의 형질(形質)로도 식별(識別)된다.

• 한국의류학회지
• /
• 제31권12호
• /
• pp.1700-1709
• /
• 2007

본 연구의 목적은 계절별 의복을 착용하고 쾌적한 상태를 유지하는 동안 불감체중손실과 온열 생리적 요소들간의 관련성을 살펴보는 것이다. 이를 위해 한국의 계절별 실내 환경이 인공기후실에 조성되었고 (봄/가을 환경 기온 평균 22.5, 여름 24.7, 겨울 16.8), 설문조사를 바탕으로 총 26 종의 계절별 한벌의복이 선정되었다(봄/가을 옷 8종, 여름 옷 7종, 겨울 옷 11종). 다섯 명의 젊은 여성이 피험자로 참여하였으며, 결과는 다음과 같다: 1) 불감체중손실(IL)은 봄/가을 의복을 착용한 경우 $19{\pm}5g{\cdot}m^{-2}{\cdot}hr$, 여름 옷 $21{\pm}5g{\cdot}m^{-2}{\cdot}hr$, 겨울 옷 $18{\pm}6g{\cdot}m^{-2}{\cdot}hr$으로, 겨울 환경보다 여름 환경에서 더 컸다(p<.001). 2) 호흡기를 통한 불감수분손실(IWR)은 불감체중손실과 반대의 경향을 보여 주어, 겨울옷을 입은 경우 $6{\pm}1g{\cdot}m^{-2}{\cdot}hr$, 여름 옷을 입은 경우 $5{\pm}1g{\cdot}m^{-2}{\cdot}hr$ 였다(p<.001). 3) 불감수분손실 (IW)에서 호흡기를 통한 불감수분손실이 차지하는 비중은 여름 옷을 착용한 경우 평균 28%, 겨울 의복의 경우 38%였다(p<.001). 4) 쾌적한 상태에서, 산열량 중 불감수분손실이 차지하는 비율은 봄/가을 의복을 착용한 경우 25%, 여름옷의 경우 27%, 겨울옷의 경우 23%였다. 5) 불감체중손실과 의복의 보온력 간, 그리고 불감체중손실과 피복면적 간에는 모두 약한 역상관 관계가 관찰되었다. 6) 불감체중손실은 기온, 기습, 에너지 대사, 환기량, 평균피부온도, 의복내 습도 등의 요소와 유의한 상관을 보였으나, 상관계수들은 모두 0.5 이하였다. 결론적으로, 불감체중손실과 온열 생리 요인들 간에는 약한 상관이 존재했으나, 피험자들이 온열 쾌적을 유지하는 경우 착용한 의복 종류 및 노출 기온에 상관없이 불감체중손실량은 좁은 범위를 유지했다.