• 제목/요약/키워드: surface radiation

검색결과 2,134건 처리시간 0.043초

감마선 및 Methyl Bromide처리가 배 과실의 검역해충과 품질에 미치는 영향 (Effects of Gamma Radiation arid Methyl Bromide Fumigation on Quarantine Pest and Quality of Asian Pears)

  • 권중호;강호진;조덕조;정헌식;권용정;변명우;최성진;최종욱
    • 한국식품영양과학회지
    • /
    • 제31권1호
    • /
    • pp.57-63
    • /
    • 2002
  • 배(Pyrus pyrifolia cv. Niitaka) 과실의 검역해충 사멸을 위하여 methyl bromide (MeBr) 훈증의 대체방안을 연구할 목적으로 감마선 조사의 적용가능성을 검토하였다. 배 과실에서 검역대상 해충으로 점박이응애(Tetranychus urticae Koch)와 사과응애(Panonychus ulmi Koch)가 동정되었다. 이들 해충들은 MeBr 훈증에 의해 처리 1일 후 완전 박멸되었으나, 감마선 처리에 의해서는 지효성을 보이면서 조사선량에 비례하여 사충률이 증가되었다. 과실의 호흡량은 조사선량의 증가와 MeBr 훈증에 의해 증가되었다. 과실의 과피 흑변과 과심 장해는 MeBr 처리에 의해 크게 촉진되었으며, 감마선 처리에서도 선량에 비례하여 촉진되었다. 과육경도와 표면색도는 MeBr의 영향 보다는 2 KGy 이상의 감마선 조사에 의해 과육의 연화와 표면색도의 변화가 나타났다. 적정산도는 3 kGy 조사에 의해 다소 낮았으며, 아세트알데히드 함량은 처리조건의 영향을 받지 않았으나, 에탄올 함량은 3 kGy 조사에 의해 증가되었다. 관능적 품질특성은 1 kGy 이상의 감마선 조사에 의해 유의적으로 저하되었다.

Characterization of New Avalanche Photodiode Arrays for Positron Emission Tomography

  • Song, Tae-Yong;Park, Yong;Chung, Yong-Hyun;Jung, Jin-Ho;Jeong, Myung-Hwan;Min, Byung-Jun;Hong, Key-Jo;Choe, Yearn-Seong;Lee, Kyung-Han
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2003년도 제27회 추계학술대회
    • /
    • pp.45-45
    • /
    • 2003
  • The aim of this study was the characterization and performance validation of new prototype avalanche photodiode (APD) arrays for positron emission tomography (PET). Two different APD array prototypes (noted A and B) developed by Radiation Monitoring Device (RMD) have been investigated. Principal characteristics of the two APD array were measured and compared. In order to characterize and evaluate the APD performance, capacitance, doping concentration, quantum efficiency, gain and dark current were measured. The doping concentration that shows the impurity distribution within an APD pixel as a function of depth was derived from the relationship between capacitance and bias voltage. Quantum efficiency was measured using a mercury vapor light source and a monochromator used to select a wavelength within the range of 300 to 700 nm. Quantum efficiency measurements were done at 500 V, for which the APD gain is equal to one. For the gain measurements, a pencil beam with 450 nm in wavelength was illuminating the center of each pixel. The APD dark currents were measured as a function of gain and bias. A linear fitting method was used to determine the value of surface and bulk leakage currents. Mean quantum efficiencies measured at 400 and 450 nm were 0.41 and 0.54, for array A, and 0.50 and 0.65 for array B. Mean gain at a bias voltage of 1700 V, was 617.6 for array A and 515.7 for type B. The values based on linear fitting were 0.08${\pm}$0.02 nA 38.40${\pm}$6.26 nA, 0.08${\pm}$0.0l nA 36.87${\pm}$5.19 nA, and 0.05${\pm}$0.00 nA, 21.80${\pm}$1.30 nA in bulk surface leakage current for array A and B respectively. Results of characterization demonstrate the importance of performance measurement validating the capability of APD array as the detector for PET imaging.

  • PDF

KSTAR 저온용기 내부의 헬륨라인 설치 및 검사 (Assembly and Test of the In-cryostat Helium Line for KSTAR)

  • 방은남;박현택;이영주;박영민;최창호;박주식
    • 한국진공학회지
    • /
    • 제16권2호
    • /
    • pp.153-159
    • /
    • 2007
  • KSTAR 장치의 저온 component에 헬륨을 공급하기 위한 헬륨라인은 크게 두 가지로 이루어져 있다. 냉동기에서 KSTAR 저온용기 외부까지의 트랜스퍼 라인과, 저온용기 내부의 헬륨라인이다. KSTAR 장치는 3가지 종류의 헬륨을 사용하여 각 저온 component를 냉각하는데, 초전도 자석 시스템과 버스라인에는 초임계 헬륨, 전류인입장치에는 액체 헬륨, 열차폐체에는 가스 헬륨을 공급한다. 저온용기 내부의 헬륨라인은 냉동기에서 저온용기 근처까지 연결된 배관을 저온용기 내부의 각 장치에 최단거리로 열손실 없이 설치하여 각 장치가 정상 작동하도록 하는데 그 목적이 있다. 저온용기 내부의 헬륨라인은 최대 20bar로 가압되는 운전시간 동안에 헬륨누설 없이 설치되어야 한다. 그리고 상온으로 부터의 복사열을 차단하기 위하여 다층절연제로 배관을 감싸주어야 하고 고전압 부분은 프리프레그 테잎으로 절연되어야 한다. 전기절연체는 세라믹과 스테인레스 스틸 튜브를 브레이징 접합 방법으로 연결하여 만들어진 것으론 배관과 배관, 배관과 저온 component간의 절연을 위해 사용되고, 헬륨라인과 동일하게 4.5K 초임계 헬륨온도에서 누설이 없어야 한다. 따라서 모든 전기절연체는 액체질소에 침전시켜 열충격을 가하고, 내부에 30 bar를 가압하여 진공 누설시험을 한다. 그리고 초전도 자석과 배관의 절연체로 사용되므로 15kV 고전압 절연 검사를 한다. 전기절연체의 세라믹 부분은 구조적 보강을 위하여 추가적으로 표면에 절연 작업을 한다. 현재 대부분의 저온용기 내부의 헬륨 라인은 설치 완료되어 있으며, 최종 검사가 진행 중이다.

배수갑문 운용에 따른 시화호의 수온과 염분 변화 (Impact of Seawater Inflow on the Temperature and Salinity in Shihwa Lake, Korea)

  • 최정훈;김계영;홍대벽
    • 한국지구과학회지
    • /
    • 제21권5호
    • /
    • pp.541-552
    • /
    • 2000
  • 1997년 2월부터 1998년 7월까지 총 33회에 걸쳐 시화호내 11개 정점에서 장기간 관측한 수온, 염분 자료를 이용하여 배수갑문운용에 따른 시화호의 물성변화를 파악하였다. 배수갑문을 통한 해수유통이 없었던 1997년 3월부터 1997년 6월까지 시화호내의 염분은 15psu 이하로 나타났으며, 약 11m 수심을 경계로 염분에 의한 강한 성층이 관측되었다. 배수갑문을 통한 해수유입이 시작된 1997년 7월에는 태양복사열의 증가로 표층수온이 급격히 상승하여 표층과 저층의 수온차가 약 10^{\circ}C$ 이상으로 나타났으며, 1997년 10월{\sim}$12월에는 표층에 비해 저층 수온이 상대적으로 높은 수온역전현상이 발생하였다. 1997년7월 배수갑문 개폐시기를 전 ${\cdot}$ 후로 배수갑문 내측에 위치한 정점에서 장기간 수온, 염분, 유속 및 유향을 조사한 결과, 해수유입시 수온과 염분이 대칭적인 분포를 나타내었으며, 이는 외해로부터 해수 유입시마다 저온, 고염의 해수가 시화호 내로 유입되었기 때문인 것으로 판단된다. 1998년 1월 이후에는 지속적인 배수갑문 개폐의 영향으로 시화호의 염분이 30psu 이상으로 해수화되었으며, 배수갑문 개폐 이전에 비해 성층이 크게 약화된 것으로 나타났다.

  • PDF

감마선에 의한 감귤 궤양병균의 불활성화와 감귤 궤양병 감염에 미치는 영향 (Inactivation of Xanthomonas citri subsp. citri and Effect on Infection of Citrus Canker by Gamma Irradiation)

  • 김경남;송민아;한상헌;송성준;전용철
    • 식물병연구
    • /
    • 제20권4호
    • /
    • pp.283-288
    • /
    • 2014
  • 감귤 궤양병은 Xanthomonas citri subsp. citri에 의해 발생하는 병으로서 많은 나라에서 이 병에 대해 검역을 실시하고 있다. 최근 methyl bromide의 검역 시 사용이 제한됨에 따라 감마선을 이용한 농수축산물에 대한 살균 방안이 대두되고 있다. 본 연구에서는 현탁액 형태의 감귤 궤양병균과 생과실 과피에 존재하는 감귤 궤양병균의 밀도를 감소시킬 수 있는 감마선의 선량을 알아보았다. 미생물의 밀도를 90% 감소시키는 선량인 감귤 궤양병균의 $D_{10}$ value는 현탁액과 감귤 생과실 과피에서 각각 55와 28 Gy였다. 또한 감마선을 처리한 감귤 궤양병균 현탁액을 감귤 잎에 접종하였더니 병 발생이 억제되었다. 본 연구를 통하여 감마선 처리에 의해 감귤 생과실에 존재하는 감귤 궤양병균을 박멸할 수 있다고 판단되며 본 연구 결과는 감마선을 검역에 활용하는데 가치가 있다고 생각된다.

화강암지역에 고준위 원자력 폐기물 처리에 대한 안정성 평가 (Evaluation of the Safty for the Disposal of High-level Nuclear Waste in the Granite)

  • 오창환
    • 자원환경지질
    • /
    • 제29권2호
    • /
    • pp.215-225
    • /
    • 1996
  • All the radionuclides in high-level nuclear waste will decay to harmless levels eventually but for some radionuclides decay is so slow that their radiation remains dangerous for times on the order of tens or hundreds of thousands of years. At the present time, the most favorite disposal plan for high-level radioactive waste is a mined geological disposal in which canister enclosing stable solid form of radioactive waste is placed in mined cavities locating hundred meters below the surface. The chief hazard in such disposal is dissolution of radionuclides from the waste in the groundwater that will eventually carry the dissolved radionuclides to surface environments. The hazard from possible escape of the radionuclides through groundwater can be delayed by engineered and geologic barriers. The engineered barriers can become useless by unexpected geologic catastrophe such as volcanism, earthquake, and tectonic movement and by fraudulent work such as careless construction, improperly welded canisters within the first few decades or centuries. As a result, dangerously radioactive waste which is still intensively radioactive is directly exposed to attack by moving groundwater. All the more, it is almost impossible to control repositories for times more than 10,000 years. Therefore, naturally controlled geologic, barriers whose properties will not be changed within 10,000 years are important to guarantee the safety of repositories of high-level radioactive waste. In Sweden and France, the suitability of granite for the mined geological disposal of high-level waste has been studied intensively. According to the research in Sweden and France, granites has the following physio-chemical characteristics which can delay the transportation of radionuclide by groundwater. First, the permeabilities of granites decreases as the depth increases and is $10^{-8}{\sim}10^{-12}m/s$ at depth below 300 m. Second, groundwater at depth below 300 m has pH=7-9 and reducing condition (Eh=-0.1~0.4). This geochemical condition is desirable to prevent both canister and solid waste from corrosion. Third most radionuclides are not transported by low solubilities and some radionuclide with high solubility such as Cs and Sr are retarded by absorption of geologic media through which ground water flows. Therefore, if high-level waste is disposed at depth below 300 m in the granite body which has a low permeability and is geologically stable more than 10,000 years, the safety of repositories from the hazard due to radionuclide escape can guaranteed for more than 10,000 years.

  • PDF

Production of Rapamycin in Streptomyces hygroscopicus from Glycerol-Based Media Optimized by Systemic Methodology

  • Kim, Yong Hyun;Park, Bu Soo;Bhatia, Shashi Kant;Seo, Hyung-Min;Jeon, Jong-Min;Kim, Hyun-Joong;Yi, Da-Hye;Lee, Ju-Hee;Choi, Kwon-Young;Park, Hyung-Yeon;Kim, Yun-Gon;Yang, Yung-Hun
    • Journal of Microbiology and Biotechnology
    • /
    • 제24권10호
    • /
    • pp.1319-1326
    • /
    • 2014
  • Rapamycin, produced by the soil bacterium Streptomyces hygroscopicus, has the ability to suppress the immune system and is used as an antifungal, anti-inflammatory, antitumor, and immunosuppressive agent. In an attempt to increase the productivity of rapamycin, mutagenesis of wild-type Streptomyces hygroscopicus was performed using ultraviolet radiation, and the medium composition was optimized using glycerol (which is one of the cheapest starting substrates) by applying Plackett-Burman design and response surface methodology. Plackett-Burman design was used to analyze 14 medium constituents: M100 (maltodextrin), glycerol, soybean meal, soytone, yeast extract, $(NH_4)_2SO_4$, $\small{L}$-lysine, $KH_2PO_4$, $K_2HPO_4$, NaCl, $FeSO_4{cdot}7H_2O$, $CaCO_3$, 2-(N-morpholino) ethanesulfonic acid, and the initial pH level. Glycerol, soytone, yeast extract, and $CaCO_3$ were analyzed to evaluate their effect on rapamycin production. The individual and interaction effects of the four selected variables were determined by Box-Behnken design, suggesting $CaCO_3$, soytone, and yeast extract have negative effects, but glycerol was a positive factor to determine rapamycin productivity. Medium optimization using statistical design resulted in a 45% ($220.7{\pm}5.7mg/l$) increase in rapamycin production for the Streptomyces hygroscopicus mutant, compared with the unoptimized production medium ($151.9{\pm}22.6mg/l$), and nearly 588% compared with wild-type Streptomyces hygroscopicus ($37.5{\pm}2.8mg/l$). The change in pH showed that $CaCO_3$ is a critical and negative factor for rapamycin production.

혈행화된 부분층 두개골피판을 이용한 상악골 종양 적출 환자에서의 안와하벽 재건술 증례 (Inferior Orbital Wall Reconstruction with Vascularized Partial Thickness Calvarial Bone Flap in Three Cases of Maxillary Tumor)

  • 신상호;이윤정;김준식;김남균;이경석
    • 대한두개안면성형외과학회지
    • /
    • 제10권1호
    • /
    • pp.49-54
    • /
    • 2009
  • 상악골 악성종양의 경우 적출 후 골편들을 이식해 상악동 전체를 재건하는 경우는 재발이 많아 잘 시행하지 않는다. 이러한 이유로 안와하연의 재건을 통해 안구 및 안면윤곽만을 재건하는데, 저자들이 시행한 혈행화된 부분 두께의 골이식(vascularized split thickeness calvarium)은 술기방법에 있어 골피판이 혈관경에서 쉽게 분리되는 성질이 있어 시행에 주의가 필요하고 혈관경을 포함한 temporalis muscle이 부피감을 주므로 미용상 불리한 점이 있는 반면에 골편의 높은 생존율이 보장된다는 장점과 공여부의 합병증이 적다는 장점을 가진다. 또한 술후 복시 현상이나 안구함몰이 관찰되지 않았다는 점이 합리적인 술기임을 지지해준다. 따라서 측두동맥 및 정맥을 혈관경으로 하는 혈행화된 두정골 부분층 이식술은 안와하벽을 재건하는데 있어 안전하게 시행가능 한 술기였음을 보고하는 바이다.

MOCVD로 성장한 β-Ga2O3 박막에 대한 Mg 불순물 주입 효과 (The effects of Mg impurities on β-Ga2O3 thin films grown by MOCVD)

  • 박상훈;이서영;안형수;유영문;양민
    • 한국결정성장학회지
    • /
    • 제28권2호
    • /
    • pp.57-62
    • /
    • 2018
  • 본 연구에서는 Mg acetate 수용액을 사용한 간편한 도핑방법으로 불순물을 주입하여 성장한 $Ga_2O_3$ 박막의 불순물 주입 효과에 대해 연구하였다. MOCVD 방법을 이용해 Si 기판 위에 undoped $Ga_2O_3$ 박막과 Mg-doped $Ga_2O_3$ 박막을 각각 $600^{\circ}C$$900^{\circ}C$의 성장온도에서 30분간 성장하였다. 표면 형상 분석 결과 Mg 불순물 주입에 따른 큰 차이는 확인되지 않았으며 $900^{\circ}C$에서 성장한 박막의 표면이 $600^{\circ}C$에서 성장한 박막의 표면보다 큰 거칠기를 가지고 다결정화 되는 것을 확인하였다. 광학적 특성 분석 결과, 도핑된 샘플의 경우 전체적인 발광 피크가 red shift 되었고 UV 방출 세기가 커지는 특성을 보였다. I-V 측정 결과로부터 Mg 불순물에 의해 $600^{\circ}C$ 성장 박막의 누설전류가 감소하고, $900^{\circ}C$ 성장 박막의 광전류는 증가하는 효과를 확인하였다.

$BCl_3$ 계열 유도결합 플라즈마를 이용한 사파이어 기판의 식각 특성 (Plasma Etching Characteristics of Sapphire Substrate using $BCl_3$-based Inductively Coupled Plasma)

  • 김동표;우종창;엄두승;양설;김창일
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.363-363
    • /
    • 2008
  • The development of dry etching process for sapphire wafer with plasma has been key issues for the opto-electric devices. The challenges are increasing control and obtaining low plasma induced-damage because an unwanted scattering of radiation is caused by the spatial disorder of pattern and variation of surface roughness. The plasma-induced damages during plasma etching process can be classified as impurity contamination of residual etch products or bonding disruption in lattice due to charged particle bombardment. Therefor, fine pattern technology with low damaged etching process and high etch rate are urgently needed. Until now, there are a lot of reports on the etching of sapphire wafer with using $Cl_2$/Ar, $BCl_3$/Ar, HBr/Ar and so on [1]. However, the etch behavior of sapphire wafer have investigated with variation of only one parameter while other parameters are fixed. In this study, we investigated the effect of pressure and other parameters on the etch rate and the selectivity. We selected $BCl_3$ as an etch ant because $BCl_3$ plasmas are widely used in etching process of oxide materials. In plasma, the $BCl_3$ molecule can be dissociated into B radical, $B^+$ ion, Cl radical and $Cl^+$ ion. However, the $BCl_3$ molecule can be dissociated into B radical or $B^+$ ion easier than Cl radical or $Cl^+$ ion. First, we evaluated the etch behaviors of sapphire wafer in $BCl_3$/additive gases (Ar, $N_2,Cl_2$) gases. The behavior of etch rate of sapphire substrate was monitored as a function of additive gas ratio to $BCl_3$ based plasma, total flow rate, r.f. power, d.c. bias under different pressures of 5 mTorr, 10 mTorr, 20 mTorr and 30 mTorr. The etch rates of sapphire wafer, $SiO_2$ and PR were measured with using alpha step surface profiler. In order to understand the changes of radicals, volume density of Cl, B radical and BCl molecule were investigated with optical emission spectroscopy (OES). The chemical states of $Al_2O_3$ thin films were studied with energy dispersive X-ray (EDX) and depth profile anlysis of auger electron spectroscopy (AES). The enhancement of sapphire substrate can be explained by the reactive ion etching mechanism with the competition of the formation of volatile $AlCl_3$, $Al_2Cl_6$ or $BOCl_3$ and the sputter effect by energetic ions.

  • PDF