• 상하수도학회지
• /
• 제18권5호
• /
• pp.588-597
• /
• 2004

In this research, we investigated the variation of transmembrane pressure and permeate water quality with pre coagulation and sedimentation with iron based coagulant and chlorination of feed water for PVDF (polyvinylidene fluoride) based MF membrane filtration. NaCIO was fed to the membrane module with dosage of 0.5mg/L and maintained during filtration. To observe the effect of raw water, three types of raw and processed waters, including river surface water, coagulated water and coagulated-settled water, were applied. In case of river surface water, the transmembrane pressure increased drastically in 500 hours of operation. On the contrary, no significant increase in transmembrane pressure was observed for 1,200 hours of operation for coagulated water and coagulated-settled waters. The turbidity of permeate was lower than a detection limit of equipment for all raw waters. The removal efficiency of humic substances of coagulated water and coagulated-settled water was approximate ten times of that of surface river water. And, the removal efficiency of TOC and DOC was approximate two times of that of surface river water. From the results of plant operation, stable operation was maintained at $0.9m^3/m^2{\cdot}day$ filtration flux through the combination of pre-coagulation and pre-chlorination. However, the water quality of permeate was the best when pre-coagulation-sedimentation process was combined with pre-chlorination.

• 접착 및 계면
• /
• 제8권3호
• /
• pp.1-8
• /
• 2007

폴리우레탄 폼 소재에 평판형 플라즈마 전처리 방식을 적용시켜 접촉각 및 접착력을 향상시켰다. 플라즈마 반응기의 최적의 반응조건을 조사하기 위해서 반응가스(질소, 아르곤, 산소, 공기), 가스의 유량(30~150 mL/min), 그리고 반응시간(0~30초) 등을 변화시켜 전처리하여 진공식 플라즈마 방식과 비교 검토하였다. 처리 후 소재의 표면 변화는 SEM과 ATR-FTIR을 이용하여 측정하였다. 폴리우레탄 폼에서 질소의 유량이 100 mL/min이고 반응시간이 10초일 때 접촉각의 저하에 따른 가장 좋은 접착력의 결과를 보여 주었다. 결과적으로 평판형 플라즈마 조작 방식에 의한 처리로 폴리우레탄 폼의 접촉각과 접착박리강도가 개선되었음을 확인하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.39-46
• /
• 2000

In pulp and papermaking process, enzymatic treatment of pulp fibres has been a topic of increasing interest in last decade. Lots of patents, papers and research reports were published on the application of enzymes in the fields of enzymatic bleaching, deinking, slime control, pitch control, waste water treatment and fibre modification. Cellulase and hemicellulase are the principal enzymes used for the modification of fibre property. This study was carried out for determinating the behaviors of enzyme to pulp fibres. A commercial enzyme, Denimax BT which is consisted with cellulase and hemicellulase, was treated to the kraft pulp produced from domestic hardwood mixtures. Results were mainly concentrated on the behaviors of freeness, drainability and fines content of fibres, and physical properties of paper with enzyme treatment. The freeness levels and dewatering ability were developed, and the fines contents were decreased. The creation of fines were controlled by the method of pre-enzyme treatment prior to fibre beating. The mechanical strength of paper, like tensile, burst, tear strength and folding endurance, were remarkably improved by the pre-enzyme treatment.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.598-607
• /
• 2004

In this study, the effects of two pre-treatment processes were observed prior to membrane filtration: pre-coagulation and pre-ozonation. To compare the effect of two above-mentioned pre-treatments, we adopted the four schemes: first one is direct membrane filtration of river surface water, second one is membrane filtration after pre-coagulation, third one is membrane filtration after pre-ozonation and fourth one is membrane filtration after pre-coagulation and pre-ozonation. There are two exceptional characteristics in applied processes. One is the usage of the MF membrane which has high ozone resisting characteristic. Therefore, ozone resides in membrane module during filtration. The other is adoption of Jet Mixed Separator (JMS) as coagulation-sedimentation process. The change in transmembrane pressure and permeate water quality were also examined. As a result, considering the filtration performance efficiency and permeate water quality, the process composed of filtration with combination of both pre-coagulation and pre-ozonation was proved most effective. The improved efficiency was due to the reduction of loading rate of fouling inducing materials to membrane module by coagulation process as well as variable reactions, such as degradation, particle destabilization and coagulation, occurred by residual ozone in membrane module. The additional effect of pre-coagulation before pre-ozonation is suppression of AOC, one of the by-products induced by ozonation. Therefore, combination of pre-coagulation and pre-ozonation is the effective process to overcome the major de-merit of ozonation i.e. by-products formation.

• 마이크로전자및패키징학회지
• /
• 제27권1호
• /
• pp.37-43
• /
• 2020

Fan-out wafer level packaging (FOWLP) 재배선 적용을 위한 Ti 박막과 WPR 절연층 사이의 계면 신뢰성을 평가하기 위해, O₂ 플라즈마 전처리 및 후속 열처리 시간에 따라 90° 필 테스트를 진행하였다. O₂ 플라즈마 전처리 시간이 증가 할수록 계면 접착력이 감소하다가 유지되는 거동을 보였으며, 이는 과도한 O₂ 플라즈마 전처리가 WPR 절연층 내의 C-O-C 또는 C=O 결합을 끊어 WPR 표면이 손상을 받아 계면 접착력이 저하된 것으로 판단된다. 또한 O₂ 플라즈마 전처리를 30초 진행한 시편을 150℃ 후속 열처리 진행한 결과, 계면 접착력이 0시간에서 24시간까지는 감소하였으나, 100시간까지 유지되는 거동을 보였다. 이는 고온에 취약한 WPR 절연층이 과도한 열처리로 인해 손상되어 계면 접착력이 급격히 감소하다가 유지되는 것으로 판단된다. 따라서, 절연층 소재에 대한 최적의 플라즈마 전처리 조건을 확보하는 것이 FOWLP 재배선의 계면신뢰성 향상을 위한 핵심요소임을 알 수 있다.

• 한국표면공학회지
• /
• 제37권5호
• /
• pp.289-295
• /
• 2004

A dense palladium-nikel (Pd-Ni) alloy composite membrane has been fabricated on microporous nickel support mixed with submicron/micron nickel powder instead of mesoporous stainless steel support. Plasma treatment process is introduced as pre-treatment process instead of HCI activation. Pd-Ni alloy composite membrane prepared by electro plating was fairly a uniform and dense surface morphology. The membrane was characterized by permeation experiments with hydrogen and nitrogen gases at temperature 773 K and pressure 2.2 psi. The results showed that hydrogen ($H_2$) permeance was 27 ml/$\textrm{cm}^2$ㆍatmㆍmin and hydrogen/ nitrogen ($_H2$$N_2$) selectivity was 8 at 773 K.

• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.85-92
• /
• 2017

PURPOSE. The aim of this study was to evaluate the effect of tooth surface pre-treatment steps on shear bond strength, which is essential for understanding the adhesive cementation process. MATERIALS AND METHODS. Shear bond strengths of different cements with various tooth surface treatments (none, etching, priming, or etching and priming) on enamel and dentin of human teeth were measured using the Swiss shear test design. Three adhesives (Permaflo DC, Panavia F 2.0, and Panavia V5) and one self-adhesive cement (Panavia SA plus) were included in this study. The interface of the cement and the tooth surface with the different pre-treatments was analyzed using SEM. pH values of the cements and primers were measured. RESULTS. The highest bond strength values for all cements were achieved with etching and primer on enamel ($25.6{\pm}5.3-32.3{\pm}10.4MPa$). On dentin, etching and priming produced the highest bond strength values for all cements ($8.6{\pm}2.9-11.7{\pm}3.5MPa$) except for Panavia V5, which achieved significantly higher bond strengths when pre-treated with primer only ($15.3{\pm}4.1MPa$). Shear bond strength values were correlated with the micro-retentive surface topography of enamel and the tag length on dentin except for Panavia V5, which revealed the highest bond strength with primer application only without etching, resulting in short but sturdy tags. CONCLUSION. The highest bond strength can be achieved for Panavia F 2.0, Permaflo DC, and Panavia SA plus when the tooth substrate is previously etched and the respective primer is applied. The new cement Panavia V5 displayed low technique-sensitivity and attained significantly higher adhesion of all tested cements to dentin when only primer was applied.

• 대한한의학방제학회지
• /
• 제27권4호
• /
• pp.285-297
• /
• 2019

Objectives : The purpose of this study is to analyze effectiveness of herbal medicine treatment on Dry Eye Syndrome. Methods : We analyze medical records of 114 patients who visited Indara oriental medical clinic for dry eye syndrome. Patients were treated with acupuncture and Inmok-tang, and the ocular surface disease index was evaluated before and after treatment. Results : Analysis of 114 medical records showed a significant decrease in the pre-treatment and post-treatment ocular surface disease index, and a statistically significant positive correlation between the duration of Inmok-tang administration and the change in the ocular surface disease index. Conclusions : Herbal medicine treatment with Inmok-tang reduces the Ocular Surface Disease Index, an indicator of subjective symptoms of dry eye syndrome.

• 에너지공학
• /
• 제23권3호
• /
• pp.191-197
• /
• 2014

콘덴싱 보일러에 이용되는 공기 예열 열교환기에서의 열전달을 향상시키기 위해 전열면에 플라즈마 표면처리가 응축열전달에 미치는 영향에 대하여 연구하였다. 연구 결과 표면처리를 한 친수성 평판이 원판보다 약 10%의 열전달 증진을 보여주었다. 원판과 친수처리 평판에서 측정한 응축 열전달 계수를 Shah 상관식과 비교해 본 결과 Shah 상관식이 원판에서 측정한 응축 열전달 계수를 10% 오차 범위로 잘 예측하는 것으로 나타났다. 따라서, 원판을 이용한 공기예열 열교환기를 설계할 때 Shah 상관식이 이용될 수 있음을 본 연구에서 알 수 있었다.

• 폴리머
• /
• 제32권5호
• /
• pp.433-439
• /
• 2008

고분자 소재에 평판형 플라즈마 전처리 방식을 적용시켜 polyurethane foam(density : 0.27)과 rubber (butadiene rubber) 소재 표면의 접촉각 및 접착력을 향상시켰다. 플라즈마 반응기의 최적의 반응조건을 조사하기 위해서 전처리기류(질소, 아르곤, 산소, 공기), 기류의 유량($30{\sim}100\;mL/min$), 그리고 전처리 시간($0{\sim}30\;s$) 등을 변화시켜 전처리하고 polyurethane foam의 경우 진공식 플라즈마처리 방식과 상호 비교하였다. 분위기 기류인 $N_2$의 유량을 100 mL/min로 설정 후 polyurethane foam은 10 s, rubber는 3 s 동안 전처리 했을 때 가장 높은 접착박리강도를 나타내었다. 전처리 후 소재의 표면 변화는 SEM과 ATR-FTIR을 이용하여 측정하였다. 결과적으로 평판형 플라즈마 조작 방식에 의한 처리로 소재 표면의 젖음성과 접착박리강도가 개선되었음을 확인하였다.