• 한국해양학회지:바다
• /
• 제17권4호
• /
• pp.225-242
• /
• 2012

이 연구는 인공위성 고도계로 관측한 해수면 높이 자료를 이용하여 동해 표층해류를 생산하고, 동해 전체 영역에 대하여 동시성 있는 표층해류 분포를 동해 해류 정보 사용자에게 제공하기 위한 최초의 시도이다. 동해 전 영역에서 인공위성 고도계와 연안 조위관측소의 해수면 높이 자료를 동시에 얻을 수 있으므로 준실시간으로 넓은 해역에 대하여 동시성 있는 표층 지형류의 산출이 가능하다. 산출된 동해 표층 지형류로부터 주요 해류의 위치와 세기 그리고 중규모 이상의 소용돌이 발달 양상을 살펴볼 수 있다. 따라서 이들 해류의 이름과 평균적인 위치를 알 수 있도록 동해 해양지명에 대한 명칭과 위치를 기술하고, 개념적인 해류도를 제시하였다. 동해 해류정보가 실제 실용화될 수 있도록 인공위성 고도계 자료를 이용하여 산출한 지형류의 월 계절 연도별 해류 분포 예를 들고, 각 해류 분포를 설명하였다. 또한 시 공간적으로 변화하는 동해 표층해류 분포 형태를 객관적으로 분류하기 위하여 16년(1993~2008년)간의 표층해류 자료를 경험직교함수(Empirical Orthogonal Function, EOF)를 이용하여 분석하였다. EOF분석 제1모드(mode)는 주로 한국 동해안을 따라 북쪽으로 흐르는 동한난류와 야마도분지 남서부 시계방향 순환의 강화 또는 약화를 나타냈다. 제2모드는 동한난류가 동해 남부를 가로지르며 사행하는 정도를 나타냈으며, 해류 사행의 파장은 약 300 km이었다. 제1모드와 제2모드가 모두 해류의 연간 변동성을 나타냈으며, 제1모드와 제2모드의 시간계수에 따라 동해 표층해류 분포를 관성 경계류 패턴(pattern), 대마난류 패턴, 사행 패턴, 외해분지류 패턴으로 분류할 수 있다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.465-470
• /
• 2002

For measuring friction-factor of artificially-roughened surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. the measurement of leakage and pressure distribution through round-hole pattern specimen with different hole area is described and a method is discussed for determining the friction-factor experimentally. Results show that the friction-factor of the round-hole pattern surfaces is bigger than that of smooth surface and increases as increasing the hole area. A empirical friction factor model for round-hole pattern surface is defined as the Moody's friction factor formula.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1085-1088
• /
• 2001

The process of styrofoam pattern that has been used for material of press die pattern depends chiefly on handwork. Laser manufacturing system developed to increase precision and efficiency of process that is also able to convert the design easily. Applying the RP(rapid prototyping) concept reversely, the unnecessary part of section is vapored away by heat source of laser beam after converting 3-D CAD model into cross-sectional shape information. Laser beam is line-scanned in plane specimens to measure the depth and width of cut, surface roughness, cross-sectional shape as converting laser power, scanning speed, cutting gas pressure. With these basic data, plane surface, inclined surface, hole, outer contour trimming process is experimented and optimum condition are obtained. In plane and inclined surface experiments, 15W laser power and 50mm/s scanning speed make superior processing property and 30W, 10mm/s make processing efficiency increase in trimming process. With these results, simple patterns were manufactured and the possibility of applying laser manufacturing system to styrofoam pattern was convinced.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.119-126
• /
• 2006

The finishing process of die requires the processing technique of a height efficiency and precision. Because the precision of die gives the quality of goods the influence directly. The hydro-static polishing device employs the hydro-static axis and is able to polish the structure of complex picture under the constant pressure and is got constant surface roughness at all polished plane. Therefore, In order to polish precision sculptured surface, it was used the hydro-static polishing device. Polishing device's polishing characteristic is estimated by polishing conditions which are size of abrasive, material of tools. And, because the surface quality of workpiece depends on polishing pattern which relates to motion of abrasive grain. The polishing characteristic according to polishing pattern was evaluated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.655-667
• /
• 2017

The results of a numerical study on the performance of a propeller operating near a free surface are presented. The numerical simulations were performed for the various advance coefficients and the submergence depths of the model propeller. The effects of the model propeller size were investigated using two different model propeller sizes for all cases. The wave pattern of the free surface and the flow structure around the propeller as well as the hydrodynamic characteristics of the propeller were investigated through simulation results. The thrust and torque fluctuated and the trajectory of the tip vortex was distorted due to the interaction with the free surface. The wave pattern of the free surface was related to the tip vortex of the propeller. The decreases in thrust and torque at the small model propeller were greater than those of the large model propeller. The reduction rate of the thrust and torque increased with the advance coefficient.

• 대한인간공학회지
• /
• 제24권2호
• /
• pp.85-91
• /
• 2005

To understand the basic relationship between 3D curved surface model and 2D pattern, simplified torso model was generated by commercial CAD program (IDEAS). 3D torso model was then divided into different blocks and unfolded into a flat pattern as in ordinary works of clothing item design. As results, 2D pattern development of different part of 3D torso model was attempted and analyzed mathematically. It was found that different height, radius and tangent slope of 3D blocks resulted in different 2D pattern. The relationships between the shape parameters of 3D torso blocks and those of 2D patterns were analyzed using regression equations. Direct way of drawing a 2D pattern of corresponding 3D torso block was also illustrated for the convenience of pattern making using conventional measurements of upper/ lower radii and height of 3D torso block.

• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.35-45
• /
• 2012

The development of digital media made the change of architectural paradigm from tectonic to the surface and pattern. This means the transition to the new kind of materiality and the resurrection of ornament. This study started as an aim to apply biological pattern to architectural design from the new perception of pattern. Architectural patterns in the early era appeared as ladders, steps, chains, trees, vortices. But since 21st century, we can find patterns in nature like atoms and molecular structures, fluid forms of dynamics and new geometrical pattern like fractal and first of all biological patterns like viruses and micro-organisms, Voronoi cells, DNA structure, rhizomes and various hybrids and permutations of these. Pattern became one of the most important elements and themes of contemporary architecture through the change of materiality and resurrection of ornament with the new perception of surface in architecture. One of the patterns that give new creative availability to the architectural design is biological pattern which is self-organized as an optimum form through interaction with environment. Biological patterns emerge mostly as self-replicating patterns through morphogenesis, certain geometrical patterns(in particular triangles, pentagons, hexagons and spirals). The architectural application methods of biological patterns are direct figural pattern of organism, circle pattern, polygon pattern, energy-material control pattern, differentiation pattern, parametric pattern, growth principle pattern, evolutionary ecologic pattern. These patterns can be utilized as practical architectural patterns through the use of computer programs as morphogenetic programs like L-system, MoSS program and genetic algorithm programs like Grasshoper, Generative Components with the help of computing technology like mapping and scripting.

• 화약ㆍ발파
• /
• 제37권2호
• /
• pp.1-13
• /
• 2019

본 연구에서는 도심지 발파에서 형성되는 분할 단면의 변형을 확인하기 위해 Visual FEA 유한요소 프로그램으로 발파 단면을 모델링하여 발파 기폭 패턴에 따른 최대주변형률을 분석하였고, Visual FEA 유한요소 프로그램으로 분석된 분할 단면과 현장 발파로 형성된 분할 단면을 비교하였다. 결과적으로, 발파 기폭 패턴에 따라 분할 단면에서 최대주변형률의 차이를 나타냈고, 전산해석과 현장 발파에서 분할 단면이 유사한 파형 형태를 보이는 것으로 확인되었다.

• 복식문화연구
• /
• 제29권6호
• /
• pp.904-921
• /
• 2021

The aim of this study was to develop a body type suitable for adult men aged from their 20s to their 40s and to present a method of drafting related patterns. To this end, the somatic surface pattern data from previous studies were used. The research method involved drafting torso patterns for each type by setting and distributing the ease to the somatic surface pattern. Appearance evaluation was performed with virtual clothing. Then, the torso pattern for each body type was completed and presented as a draft method. SPSS was used for data analysis in this study. The research results are as follows. Types 1, 2, and 3 were set to 7%, 6%, 5%; 7%, 6%, 4%; and 6.5%, 7%, and 6% for chest, waist, and hip circumference measurements, respectively. The ratio of front to back was 50%:50%, 50%:50%, and 50%:50% of the spare for each body part for Type 1; 70%:30%, 50%:50%, and 60%:40% for Type 2, and 60%:40%, 70%:30%, and 60%:40% for Type 3. A tight-fit torso pattern for each body type suitable for adult males in their 20s to 40s was drafted, which was modified and supplemented through the evaluation of the first and second virtual wear. Considering the practicality of this approach, for generalization of the patterns, the items of the pattern were converted into a drafting method and presented as a draft method.

• 한국생활과학회지
• /
• 제18권2호
• /
• pp.397-406
• /
• 2009

A Study on the Development of Brassiere Pattern for Elderly Women The purpose of this study is to develop functional and sensible brassiere for elderly women. For this purpose, 6 elderly women(aged between 65 and 69) were sampled to be measured for their body sizes and tested for their bressiere wearing. he results were as follows; 1. In order to develop the basic patterns of elderly women's bressieres, 90B size was selected and then, their bressiere fitting was tested. The foundation pattern of the size 90A was proved for the body by the wearing tests. Each angle and length of the parts on the basic line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plastic mold(photo.2), the cup of brassiere pattern were applied to the body surface shell(photo.4), and full side stretch-wings were applied to 13% reduced body size. The design pattern of elderly women's brassiers were characterized by a round wired as well as a full cup(3piece) embracing the entire breasts. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items(fig. 6). The experimental brassiere was covering the whole breasts to cope with change according to breasts loosing. It was designed to support the breasts firmly.