• 대한토목학회논문집
• /
• 제30권1C호
• /
• pp.45-51
• /
• 2010

지하철 터널 시공, 지하공간 시공, 대심도 굴착 등과 같이 도심지에서의 토목구조물 설계와 시공에 있어서 큰 어려움 중의 하나는 도심지 지반조사이다. 여러 가지 지장물, 전기 잡음, 교통 진동 등과 같은 자연적, 인위적 장애물로 인하여 어느 지반조사 기법이든지 그 결과의 신뢰성은 그리 높지 않은 상황이다. 본 연구에서는 이와 같이 현실적 요구가 높은 고품질 도심지 지반조사 기법의 개발을 목표로 하여 선행연구를 수행하였고, 일차적으로 HiRAS(Hybrid Integration of Resistivity and Surface Wave Velocities) 라고 하는 표면파-전기비저항 병합기법을 개발하였다. HiRAS 기법은 표면파 기법인 CapSASW 기법과 전기비저항 기법인 PDC-R 기법을 병합한 것으로서, 지반 매질의 강성 평가에 우수한 CapSASW 기법의 장점과, 전기잡음에 대한 내성과 지층변화 평가에 우수한 특성을 가진 PDC-R 기법의 장점을 동시에 활용하고자 한 것이다. 표면파 기법과 전기비저항 기법을 동시에 활용하는 역산해석의 측면에서는 표면파 기법의 탄성파 속도와 전기비저항 시험의 전기비저항 간의 부지고유관계를 이용하여 병합역산을 수행하는 전략을 채택하였다. 또한 HiRAS 기법 개발과정에서 부차적으로 지반매질의 포아송비 분포를 2차원으로 평가할 수 있는 성과도 도출하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.197-200
• /
• 2006

The ingress of chloride ions plays a crucial role for service life design of reinforced concrete structures. In view of durability design of concrete structures under marine environment, one of the most essential parameters is the surface chloride content of concrete. However, on the basis of the results of in-situ investigation, this value has been determining in the numerous studies on the durability design of concrete structures. Hence, it is necessary to confirm the range of the surface chloride content in order to establish a unified durability design system of concrete. This study suggests a rational and practical way to calculate the maximum surface chloride content of submerged concrete under marine environment. This approach starts with the calculation of the amount of chloride ingredients in normal sea water. The capillary pore structure is modeled by numerical simulation model HYMOSTRUC and it is assumed to be completely saturated by the salt ingredients of sea water. In order to validate this approach, the total chloride content of the mortar and concrete slim disc specimen was measured after the immersion into the artificial sea water solution. Additionally, the theoretical, the experimental and in-situ investigation results of other researchers are compiled and analyzed. Based on this approach, it will follow to calculate the maximum surface chloride content of concrete at tidal zone, where the environment can be considered as a condition of dry-wetting cycles.

• Structural Engineering and Mechanics
• /
• 제58권1호
• /
• pp.181-197
• /
• 2016

In this paper, we investigated the propagation of surface waves in a nonhomogeneous rotating fibre-reinforced viscoelastic anisotropic media of higher order of nth order including time rate of strain. The general surface wave speed is derived to study the effect of rotation on surface waves. Particular cases for Stoneley, Love and Rayleigh waves are discussed. The results obtained in this investigation are more general in the sense that some earlier published results are obtained from our result as special cases. Also results for homogeneous media can be deduced from this investigation. For order zero our results are well agreed to fibre-reinforced materials. Also by neglecting the reinforced elastic parameters, the results reduce to well known isotropic medium. It is also observed that, surface waves cannot propagate in a fast rotating medium. Comparison was made with the results obtained in the presence and absence of rotation and parameters for fibre-reinforced of the material medium Numerical results are given and illustrated graphically. The results indicate that the effect of rotation and parameters for fibre-reinforced of the material are very pronounced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.373-378
• /
• 2000

An experimental investigation on the incipience of nucleate boiling in forced flow of water is performed as a verification and extension of previous analysis. The effects of the subcooling, Reynolds number and surface curvature on the onset of nucleate boiling(ONB) in a concentric annulus flow channel with smooth inner heating surface is investigated experimentaly. Through flow visualization, the boiling phenomenon was observed directly and the experimental results were examined to find ONB heat flux. The results show that the variation of heat flux at ONB is increased linearly as the Reynolds number and subcooling are increased. The effect of surface curvature is very great specially for a small radius when radius of the inner heating tube is increased, the heat flux at ONB is almost inversely increased for the range of this investigation. It is found that the effect of convex surface curvature on ONB heat flux is very significant for a small radius.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.157-164
• /
• 1994

Finite element analysis of material deformation is successfully utilized to understand metal forming processes such as forging, extrusion and deep drawing. However, such analysis involves contact problems; a free node touches a die surface and a contact node slips along the die surface. In the present investigation, appropriate contact algorithms were developed assuming that a three dimensional surface can be divided into bilinear patches and that nodal velocities are linear during an incremental time. The algorithms were coded into a computer program and tested for a simple surface. Comparison of the test result with that obtained from a commercial code is presented and discussed.

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.51-57
• /
• 2005

Vertices terminating at free surface have been investigated extensively. Most of investigations, however, are focused on surface parallel vortices and little has been known about surface normal vortex or columnar vortex. Visualized experimental results utilizing LIF technique are discussed fur the purpose of characterization of columnar vortex interacting with a clean and a contaminated free surfaces and a solid body interface in the present investigation. The results reveal that surface tension changes due to surface contamination although bulk viscosity remains constant and eventually the behavior of a columnar vortex interacting with a contaminated free surface and a solid body interface are totally different from the clean free surface case.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 춘계학술발표회 초록집
• /
• pp.77-77
• /
• 2006

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.70-70
• /
• 2000

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.285-285
• /
• 2012

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 추계학술발표강연 및 논문개요집
• /
• pp.204-204
• /
• 1999