• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 춘계학술발표회 초록집
• /
• pp.54-54
• /
• 2006

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.14-14
• /
• 2001

• Carbon letters
• /
• 제3권2호
• /
• pp.80-84
• /
• 2002

The surface treatment of C-type isotropic pitch-based carbon fiber was carried out by anodic oxidation in 5 wt% $NH_4NO_3$ electrolyte. The changes of fiber surface and carbon fiber/ABS resin composites were characterized by SEM, XPS and mechanical properties test. The oxygen functional groups on the surface, such as hydroxyl (-C-OH), carboxyl (-COOH) groups etc., increased after oxidation. Tensile strength, flexural strength and modulus of carbon fiber/ABS composites were also enhanced. However, the impact strength decreased with the improvement of the surface adhesion between CF and matrix.

• 한국안전학회지
• /
• 제26권1호
• /
• pp.15-20
• /
• 2011

This study deals with the effect of the shot peening in SCM420H planetary gears. The hardness and roughness of the gear surface can be improved by shot blast and shot peening. there in, the shot peening techniques are welcomed especially as one of the physical surface improvement methods. The two treatments are used widely, because of the qualitative analysis of shot blast and shot peening has become possible and the surface treatment can be done with little costs compared with other surface improvement methods. Therefore, this study investigates the effects of shot blast and shot peening in surface shape. The fatigue strength test at a constant stress amplitude is performed by using an electrohydraulic serve-controlled pulsating tester. And fatigue test also explained characteristics of shot blast and shot peening of planetary gears.

• 한국표면공학회지
• /
• 제36권6호
• /
• pp.475-479
• /
• 2003

In this study, to investigate the effects of 2-step shot peening at the surface of spring steel, tests are conducted on spring steel and shot peened specimens. Various tests are accomplished to evaluate mechanical properties influenced by shot peening process, and fatigue tests are also performed to evaluate the improvement of fatigue strength. And then the residual stresses are examined. The mechanical properties of material did not change so much by shot peening. However, the fatigue strength of notched specimen remarkably increased. In the case of 1-step shot peening, fatigue strength increased by about 20％ than unpeened specimen. Especially, in the case of 2-step shot peening, fatigue strength increased by about 40％, because the residual compressive stress at surface was higher than that of 1-step shot peened specimen. The fatigue strength and life are closely related to the value and position of maximum compressive residual stress by shot peening.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.128-132
• /
• 2021

본 논문에서는 표면 Texturing 방법 중 습식 에칭법을 이용하여 태양전지에 사용되는 전극의 표면을 거칠게 처리하였고, 표면 처리 후 TiO2 산화물 반도체를 사용한 염료 감응 태양전지를 제작하였다. 표면 처리된 전극을 에칭 시간에 따른 분광특성을 측정 분석하였으며, 에칭 시간에 따라 제작한 TiO2 염료 감응 태양전지의 전기적 특성을 평가함으로써 표면 처리에 따른 태양전지의 효율 향상에 관한 연구를 진행하였다. 결과적으로 전극 표면을 10분간 에칭 처리한 태양전지의 경우 기존 효율과 비교하였을 때, 약 27.46[%] 개선됨을 확인할 수 있었다.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.856-865
• /
• 1994

Cylindrical fine-ceramics, $Al_{2}O_{3}$, was lapped on its outer surface by vibrational lapping unit manufactured in the laboratory. Cylindrical lapping of fine-ceramics is necessarily be characterized and optimized because its process as other finishing methods is time-spending and, so, inefficient one, and because it is very complicated and random process affected by numerous factors in itself and in its environment. In this study, an efficient experimental approach, experimental design method, was used to analyze characteristics of the cylindrical lapping of fine-ceramics, $Al_{2}O_{3}$, and response surface methodology(RSM) to find out the optimal variables combination for the maximum improvement of surface roughness($R_a$). From the final surface roughness point of view in the given lapping conditions, a stationary point or optimal lapping conditions as well as the possible maximum improvement of surface roughness($R_a$) was predicted.

• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.63-73
• /
• 2015

본 논문에서는 원본 영상에 존재하는 가로축 방향과 세로축 방향의 단순 볼록 곡면 혹은 단순 오목 곡면 특성을 정밀하게 조사한 후, 다양한 곡면의 특성을 효과적으로 활용하여 실제 영상의 픽셀 값에 더욱 근접한 보간 값을 구하고 이를 사용하여 확대 영상을 생성하는 확대 영상의 화질 개선 기법을 제안한다. 제안 기법의 절차에 따라 구해진 보간 값은 실제 영상에 존재하는 단순 볼록 곡면, 단순 오목 곡면, 복합 곡면상의 값을 갖게 되기 때문에 실제 영상에 더욱 근접한 확대 영상을 생성할 수 있어 확대 영상의 화질이 향상된다. 제안 기법을 적용하여 확대한 영상의 PSNR 값이 기존의 기법들을 적용하여 확대한 영상의 PSNR 값보다 큰 것을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.82-92
• /
• 2021

Nakdong technique is an unfamiliar scorching treatment using an iron heated in a kiln over 1000℃. It is a typical convention in Asian countries to treat Nakdong on the surface of paulownia species. The scorching treatment changes the surface characteristics as well as the color of the wood. This study focused on the effects of functional features such as water resistance, anti-mold, anti-termite, and sound improvement because this treatment is usually used on paulownia wood-bodied musical instruments surface. It took 28'57" for Nakdong-iron treated surface to absorb a droplet of water. The absorbance time of iron treated surface was longer than that of torch treated one. There was no noticeable effect on the anti-mold test. On the anti-termite test, there was nearly 3% more mean mass loss on the torch samples than controlled and iron treated ones. In examining the sound radiation coefficient before and after Nakdong treatment, the Nakdong-iron treated surface showed an increase in the average value of 1.2 m4/kg s, which means that it has sound quality improvement. Through this research, the Nakdong technique results are expected to be used as basic-data for further research and give a practical idea for using the traditional treatment method on the wood surface.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.239-243
• /
• 1999

At Present, 200mm wafer technology is being applied for commercial fabrications of 64, 128, and 256 M DRAM devices, and 300mm technology will be evolved for 1G DRAM devices in the early 21th century, recognizing limitations of several process technologies. In particular recognition has been realized in harmful effects of surface contamination of trace metals introduced during devicing processes. Such a guide line for surface metal contamination has been proposed as 1E9 and 1E10 atoms/$\textrm{cm}^2$ of individual metal contamination for wafering and devicing of 1G DRAM, respectively, and so its measurement limit should be at least 1E8 atoms/$\textrm{cm}^2$. The detection limit of present measurement systems is 2E9 atoms/$\textrm{cm}^2$ obtainable with TRXFA(Total Reflection X-Ray Fluorescence Analysis). TRXFA is nondestructive and the simplest in terms of operation, and it maps the whole wafer surfaces but needs detection improvement. X-Ray intensity produced with synchrotron accelerator is much higher than that of conventional X-ray sources by order of 4-5 magnitudes. Hence theoretically its reactivity with silicon surfaces is expected to be much higher than the conventional one, realizing improvement of detection limit. X-ray produced with synchrotron accelerator is illuminated at a very low angle with silicon wafer surfaces such as 0.1 degree and reflects totally. Hence informations only from surface can be collected and utilized without overlapping with bulk informations. This study shows the total reflection phenomenon and quantitative improvement of detection limit for metallic contamination. It is confirmed that synchrotron X-ray can be a very promising alternative for realizing improvement of detection limit for the next generation devices.