• 제목/요약/키워드: surface gloss

검색결과 137건 처리시간 0.026초

The Corrosion Behavior of Anti-Graffiti Polyurethane Powder Coatings

  • Rossi, S.;Fedel, M.;Deflorian, F.;Feriotti, A.
    • Corrosion Science and Technology
    • /
    • 제17권6호
    • /
    • pp.257-264
    • /
    • 2018
  • Anti-graffiti coatings have become more important. These layers must guarantee excellent corrosion protection properties, and graffiti must be easily removable, without reducing protection and aesthetic properties. In this study, anti-graffiti and corrosion behavior of two anti-graffiti polyurethane powder coatings were studied. These layers were deposited on aluminum substrate, with two different surface finishes, smooth, and wrinkled. The action of four different removers are investigated. Graffiti were drawn on coatings by means of red acrylic spray paint. Methyl-ethyl-ketone (MEK) and a "commercial" remover were the most effective solvents, in terms of graffiti removal capability, producing limited change in aesthetical surface aspect for smooth finishing. The wrinkled surface was less resistant. Corrosion protection properties, after removal action and contact with the remover, were evaluate by electrochemical impedance spectroscopy. After approximately 5 hours, coatings were no longer protective due to formation of defects. To simulate the weathering effect, UV-B cyclic test (4 hours of UV exposure followed by 4 hours of saturated humidity at $50^{\circ}C$) were performed for 2000 hours. Gloss and color changes were measured, and electrochemical impedance spectroscopy measurements were performed after aging and graffiti removal.

패키지 광택이 제품 구매의도에 미치는 영향: 기업 친환경성 인식과 품질인식의 매개효과를 중심으로 (The Effect of Package Gloss on Purchase Intention: Mediating Role of Perceived Corporate Eco-friendliness and Perceived Quality)

  • 임혜빈;임가현;도은영;장소담;이병관
    • 감성과학
    • /
    • 제25권4호
    • /
    • pp.53-62
    • /
    • 2022
  • 본 연구는 식품 영역에서 제품 패키지의 광택이 소비자들이 인식하는 기업 친환경성과 제품 품질에 미치는 영향을 확인하고, 최종적으로 구매의도에 차이를 유발하는지 확인하고자 실시되었다. 실험 참가자들은 패키지에 광택이 도는 유광 조건과 광택이 없는 무광 조건으로 무선 할당되었으며, 케첩과 감자칩 제품을 보고 기업 친환경성 인식, 품질인식, 구매의도를 묻는 문항들에 응답하였다. 연구 결과, 소비자들은 무광 패키지 제품을 제조한 기업이 유광 패키지 제품을 제조한 기업보다 더 유기농 재료를 사용할 것이며, 더 친환경적일 것이라고 인식하였다. 또한 소비자들은 기업이 친환경적일 것이라고 인식할수록 제품의 품질을 높게 평가하였으며, 더 높은 구매의도를 보였다. 본 연구는 패키지 광택의 효과를 친환경 식품 영역에서 기업 이미지 인식에까지 확장하였으며, 패키지 광택을 이용한 친환경 마케팅 방식을 제안했다는 점에서 이론적, 실무적 의의를 가진다. 본 연구의 한계, 가능한 향후 연구 방향도 함께 논의하였다.

다중초점화상기법(多重焦點畵像技法)을 적용(適用)한 면섬유광택분석(綿纖維光澤分析) 및 면직물(綿織物)의 광택(光澤)에 관(關)한 연구(硏究) (Application of the Multi-Focusing Composite Image for the Cotton Fiber Luster Analysis and Cotton Fabric Luster Analysis)

  • 문선혜;김종준;전동원
    • 패션비즈니스
    • /
    • 제7권5호
    • /
    • pp.108-118
    • /
    • 2003
  • Surface properties, including the texture and the luster, of cotton fibers and yarns thereof play an important role in textile technology. The convolutions and the cross-sectional shape of the cotton fiber affect the fabric texture and the luster accordingly. Mercerization of the cotton fabric affects the luster, strength, and other properties of the fabric. In this study, the effect of mercerization was examined on the luster of the cotton fabric, together with the effect of polishing treatment. One of the traditional methods determining the fabric luster is the use of glossmeter or goniometric glossmeter. The use of glossmeter gives successful results in determining the gloss of rather flat and continuous surface such as plastic sheet, painted surface, or paper products. Since the textile fabrics have diverse surface structures and textures, these could be regarded as having three-dimensional surface. Such complexity imposes some difficulties for differentiating subtle surface luster properties of diverse textile fabrics. The advancement in the area of imaging technologies has enabled the micro-scale analysis of the surface textures and the fabric luster recently. Using a CCD camera, the surface luster images were taken at various incident illumination conditions. Microscale analysis, including the blob analysis, of the images could differentiate the subtle luster properties present in a group of cotton fabric samples comprising mercerized cotton fabric, non-mercerized cotton fabric, polished cotton fabric, and a 'standard' cotton fabric. The glossmeter measurement gave satisfactory but limited differentiation among the samples, whose luster differences are easily recognizable with visual observation, except for the mercerized cotton fabric sample and the non-mercerized cotton fabric. The microscale analysis of the fabric luster could, therefore, help understand the nature of diverse textile fabric luster.

The Improvement of the Opacity and Printing Strength of Fancy Paper Overlaid Plywood

  • Kuo Lan-Sheng;Perng Yuan-Shing;Wang Eugene I-Chen;Yen Chen-Fa;Kao Tsuen-Han
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
    • /
    • pp.91-98
    • /
    • 2006
  • The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

  • PDF

pH Effects of Electroless Ni Plating on ABS Plastics

  • Song, T.H.;Lee, J.K.;Ryoo, K.K.;Lee, Y.B.
    • Corrosion Science and Technology
    • /
    • 제3권1호
    • /
    • pp.26-29
    • /
    • 2004
  • Metal plated plastics are becoming more prevalent in materials of communication parts. A new technique MmSH is a process of injecting plastics to produce innovated physical properties compared to the conventional injection process. This study involves two ways of coating plastics Ni by electroless plating and varying bath and plasma treatment for improved adhesion strength between plating layer and surface. MmSH injection processed ASS with plasma treated after neutralization showed a superior adhesion force and a gloss and rate of deposition when it was in pH 7.5. On the other hand, conventional injection processed ASS was in pH 6.5.

Lake Red C 안료의 표면적과 용매함량이 인쇄잉크의 물성에 미치는 영향 (Effect of surface area of Lake Red C pigment and solvent contents in inks on the physical properties of printing inks)

  • 김종래
    • 한국인쇄학회지
    • /
    • 제15권1호
    • /
    • pp.17-30
    • /
    • 1997
  • In this work, we have investigated the printability such as print through and str-off of domestic newspapers. Nine kinds of domestic newspapers Hansol, Deahan, Sinho, Hanla and Sepung, were tested by IGT printability tester, and studied using maximum ink requirement method. We obtained the datum of printability parameters such as maximum ink requirment of paper Ymax, printing density D, print through, set-off and gloss. The results of this test showed that a choice of the fillers on the newspaper had an effect on print through, set-off and density of newspapers in the maximum ink transfer point.

  • PDF

광택노출콘크리트의 현장 기술 (In-situ Application of Glossy Architectural Concrete)

  • 정태웅;이현희;하재담;강창운
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
    • /
    • pp.836-839
    • /
    • 1999
  • Glossy architectural concrete means high qulity concrete which develops marble-like gloss on the surface of concrete. In spite of many benefits of architectural concrete to R.C. structure such as appearance of natural stone, saving of envelope materials and reduction of building weight, the failure of in-situ application of architectural concrete by the absence of knowledge on the physical properties and form work for it can often be found in Korea. This study is to offer the basic materials on the mix proportion, vibrating, curing and treatment of concrete result from the mock up test and in-situ application of architectural concrete to embody high quality architectural concrete in Korea.

  • PDF

한지의 인쇄적성 향상 (Printability Improvement of Hanji)

  • 현경수;김민중;이명구
    • 펄프종이기술
    • /
    • 제37권4호통권112호
    • /
    • pp.52-59
    • /
    • 2005
  • Most of printing paper market today have been occupied by western paper and some machine-made Hanji used don't show the characteristic advantages for traditional hand-made Hanji. Although hand-made Hanji has an aesthetic and qualitative value, it has limited uses because of poor printability as printing paper. Unlike western paper, conventional Hanji cannot be used as Printing paper because it is impossible to make the clear formation of printed dot and to develop a high level of sizing and picking problem occurs during printing. Improvements of physical and optical properties such as roughness, smoothness, air permeability, contact angle, opacity, and paper gloss as well as sizing level were accomplished through internal and surface sizing and calendering, which made the paper better suited for printing and decreased problems during printing.

머신비전을 이용한 업쇼버 로드의 표면검사 시스템 개발 (Development of Inspection System for Surface of a Shock Absorber Rod using Machine vision)

  • 김성진;이성철
    • 한국산학기술학회논문지
    • /
    • 제15권6호
    • /
    • pp.3416-3422
    • /
    • 2014
  • 쇼크 업쇼바의 로드는 피스톤부 중심에 위치하여 왕복운동을 담당하는 부분으로 표면의 불량(찍힘)이 있을 경우 감쇠력에 대한 차이로 제품 성능을 제대로 발휘하는데 문제 발생의 요인이 되고 있다. 로드표면은 열처리 상태로 표면 광택으로 인하여 쉽게 불량이 표시되지 않으며, 작업자가 육안으로 로드의 이물질 및 찍힘, 기포 검사를 진행함으로써 눈의 피로도가 높아지고, 작업자 육안에 의존하기 때문에 제품의 검사 품질이 일정하지 않다. 본 연구에서는 제품의 원통 형상을 고려하여 라인스캔카메라를 이용한 머신비전 영상처리 기법으로 0.3mm이상의 표면의 불량을 검출하고, 검사단계에서 발생할 수 있는 표면 불량을 최소화하기 위한 전 공정 자동이송 및 양불 제품의 혼입을 방지하는 자동검사 시스템 개발에 대한 연구를 수행하였다. 표면검사 시스템 개발로 작업자의 육안 검사에 의존하고 있던 쇼크업쇼버 로드의 표면에 대한 정밀 검사시스템 구축으로 품질검사 기준을 확보하고 표준화된 검사로 신뢰도가 향상되었다.

Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing

  • Sen, Nazmiye;Tuncelli, Betul;Guller, Gultekin
    • The Journal of Advanced Prosthodontics
    • /
    • 제10권4호
    • /
    • pp.271-278
    • /
    • 2018
  • PURPOSE. The purpose of this in vitro study was to evaluate the effect of abrasive toothbrushing on the surface properties of monolithic computer-assisted design and computer-assisted manufacturing (CAD/CAM) materials stored in food-simulating liquids (FSLs). MATERIALS AND METHODS. Fourty-eight disk-shaped test specimens of each material (Paradigm MZ100/PMZ, Lava Ultimate/LU, Vita Enamic/VE, and Vita Mark II/VMII) with a diameter of 10.0 mm and a thickness of $3.0{\pm}0.05mm$ were prepared. Specimens were divided into 4 subgroups (n=12) and stored in air, distilled water, 0.02 M citric acid, or 75% ethanol/water solution for 7 days at $36.5^{\circ}C$. Then, the specimens were brushed in a multi-station brushing machine under a vertical load of 2.0 N for 3 hours. Surface gloss (GU), roughness (Ra), and hardness (Vickers [VHN]) were measured after storage and brushing simulation. The data sets were statistically analyzed with 2 and 3-way ANOVAs followed by the Tukey's post-hoc comparisons (${\alpha}=.05$). RESULTS. Statistically significant difference was found among the materials concerning the results of surface properties. VMII showed the highest VHN, while PMZ produced the lowest. Storage in FSLs significantly affected the VHN of PMZ and LU. VMII showed the lowest Ra and highest GU irrespective of FSLs and of abrasive toothbrushing. VE, LU, and PMZ produced significant decrease in GU and increase in Ra after toothbrushing. CONCLUSION. Surface properties of monolithic CAD/CAM restorative materials were differently affected by the storage media and abrasive toothbrushing.