Today's requirements for print-press runnability and print quality demand an optimised absorption and adhesion of printing ink on the paper surface. Modern coating concepts for high glossing offset grades use ultra fine pigments, whereas binder level has continuously been decreased to a minimum in recent years to achieve the highest possible sheet gloss development and for economical reasons. Both the ultra fine pigments and the reduced binder levels lead in many cases to a faster ink setting rate. On the other hand, matt paper grades use relatively coarse pigments leading to a slow ink setting compared to the high glossing papers. Both too fast and too slow ink setting properties implicate drawbacks in print quality and print press runnability. The mechanisms behind the interactions between ink and coating have been presented in many previous publications. The purpose of this study was to determine and quantify how the ink setting rate is influenced by pigment system (GCC and GCC/clay blends), latex level and latex properties in the topcoat of double coated sheet fed offset paper. The roles of binder level and type in the precoat were also assessed. The effect of calendering (temperature and pressure) was studied with one formulation. The resulting ink setting characteristics were tested using three different laboratory testing instruments. The correlation amongst the different laboratory testing methods is discussed. The results show that by varying the latex properties, the pigment system and/or latex addition level, the ink tack development of ink applied to a topcoat pigment system can be significantly influenced. It can be slowed down as often desired with ultra fine pigments or speeded up in the case of coarse pigments. There was no visible effect on the ink setting rate by using different binder systems in the precoat..
The water retention of coating colors can be accurately measured by devices such as an AA-GWR water retention meter whose principle of measurement Is based on pressure filtration of coatings under an externally applied air pressure over a certain period of time. It was hypothesized that such devices could be also used to determine the immobilization solids (IMS) of coating colors by determining a sudden drop in the rate of dewatering, that is, a sudden change in the drainage curves. To test this hypothesis, the immobilization solids of coating colors containing various thickeners and water retention additives at different levels were first accurately measured by a modified immobilization tester based on the well-known gloss drop method, and then their values were compared with those obtained by an AA-GWR water retention tester. They agreed very well and showed that the standard deviation is only 0.14% in the IMS points between both methods. This good agreement was not surprising because both test methods are based on the same end-point, that is, the immobilization solids point at which menisci begin to form at the coating surface. Theoretical considerations supporting this new method for measuring the immobilization solids of coating colors are presented and some recommendations for the test method are discussed. Also, the effect of various thickeners and water retention additives on the properties and printability of coated papers is discussed.
Today, great percentage of apparel fabrics comprise knit products. A few apparel items are almost exclusively made from knit products including sweaters, T-shirts, lingerie, and hosiery. In weft knits, intermeshing yarn traverses the fabric crosswise. The production rate of knitting machines is about four times higher than that of conventional looms iin proportion to the amount of fabric produced per unit time. Knit apparels fabrics are noted for freedom of body movement, easy-care, resilience, soft draping and quality. The appearance of fabrics is of prime importance along with tactile features such as smoothness, crispness, stiffness when we deal with the handling evaluation of the textiles. In practice, the quality and performance of fabrics judged by sighted evaluators, and it is perhaps logical, in attempting to establish an effective fabric objective measurement system. It is worthwhile to make objective measurement that correlate well with subjective evaluations made by sight and touch together. However, it often imposes difficulties to effectively measure and analyze the appearance or optical properties of the textile surface features. In this study, an attempt is made to provide a preliminary approach to the analysis of the gloss property, which is one of the optical properties of fabrics. The specimens range from 70/24 nylon 6 filament yarn knit fabric to 70/68 nylon 6 filament yarn knit fabric, the latter being finer. A few three-dimensional models based on Peirce's model of knit stitch have been proposed and material properties were given to calculate the properties. Goniophotometric measurements of the specimens were also carried out.
쌀밥 품질의 영향 요인을 규명하기 위하여 밥 짓기 과정중 밥과 밥물의 상호 관계를 분석하고, 저급의 장립종 밀양 23호의 밥맛 증진의 수단으로 새로운 밥짓기 방법을 제시하였다. 밥짓기 과정중 밥과 밥물의 높이 변화를 측정하였다. 끊는점 부근에서 밥물이 급격히 감소하고, 이어서 농축된 밥물이 밥알 표면에 엷은 피막층을 형성함을 관찰할 수 있었다. 피막 보강 물질로 찹쌀분 1,2%(W/W)를 첨가 한 후 밥짓기를 향한 결과, 피막이 크게 보강되었으며 이렇게 제조된 밥은 윤기와 외관이 향상되고 수분 함량이 증가하였으며 밥짓기중 가용성 쌀 고용분 함량의 용출을 감소시킬 수 있었다. 밥알 피막의 형성은 밥짓기의 최종단계에서 밥알의 진동과 밥물의 고형분 농도와 유관함을 보였고, 밥의 음질 결정의 중요 요소로 작용할 수 있음을 제안하였다.
UV 경화형 우레탄아크릴레이트 수지와 유기화클레이를 혼합한 후 UV를 조사하여 경화시킴으로써 폴리우레탄-클레이 나노복합체를 제조하였다. 유기화클레이로서는 Closite20A (C20A) 및 이를 실란처리하여 표면에 아크릴기를 도입한 아크릴변성 C20A를 사용하였다. XRD와 TEM 분석으로부터 제조된 나노복합체는 삽입형 나노복합체이며, 아크릴 변성시킨 C20A가 변성시키지 않은 C20A에 비해 더 잘 분산되는 것을 알 수 있었다. DMTA, 연필경도분석, PET 필름에의 부착성 시험으로부터 클레이 첨가에 의해 유리전이온도와 저장탄성률 및 연필경도가 증가하고 PET 필름에의 부착성이 향상되며, 이러한 물리적 특성의 증가는 아크릴 변성시킨 C20A를 함유한 나노복합체에서 더 크게 발현됨을 알 수 있었다. 또한, 클레이 첨가에 의해 UV경화 시 수반되는 수축을 저하시킬 수 있음을 알았다. 한편, 제조된 나노복합체는 우수한 광투과도를 나타내었으나, 광택도는 나노입자를 함유하지 않은 경우에 비해 다소 저하되었다.
에폭시의 황변 현상은 도자기 복원재에 있어 항상 발생하는 문제로 알려져 있다. 이들의 재복원을 위해서는 반드시 이 에폭시의 제거가 선행되어야 하는 바, 본 논문에서는 이의 화학적인 제거법과 그 제거제의 특성들에 대하여 논의하고자 하였다. 이 논문에서 파손되어 에폭시로 복원된 다양한 형태의 도자기들에서 에폭시의 화학적 제거에 대하여 설명하였으며 디크로로메탄(Dichloromethane)과 Dichloromethane을 기초로 한 Dimethylformamide를 이용한 용액들이 나타내는 도자기 복원에 사용된 에폭시 제거법에 대하여 설명하였다. 이들 중, 특히 Dichloromethane + Dimethylformamide 용액을 이용할 경우, 색도의 변화, 광택도의 변화, 굽힘 강도의 변화, 무게의 변화, 표면도, 박리 시간에서 매우 우수한 결과를 나타내었다. 이것은 Dichoromethane의 에폭시에 대한 팽윤 성질과 Dimethylformamide의 연화성 증진의 결과로 Dichloromethane은 에폭시와 도자기의 경계면을 팽윤시켜 박리시키면서, Dimethylformaide가 에폭시 자체의 경도를 낮춤으로 매우 약한 내부 결합을 가진 도자기라도 안정한 박리가 가능한 결과로 보인다. 또 이 용액의 직접적인 적용을 위하여 국내 대학 박물관 소장 청화백자모란문 양념단지의 재복원시의 에폭시 제거제로 이용하였으며, 매우 안정된 박리 현상을 발견할 수 있어 추후, 이를 이용하여 재 복원될 도자기 유물에 실적용할 경우, 완벽하고 안전하게 에폭시를 제거함으로 재복원될 에폭시 접착제의 제거에 충분히 이용이 가능할 것으로 사료된다.
현재 야외 철제 조형물 보존용 코팅제로 사용되고 있는 wax는 장점도 있지만 낮은 내구성 및 안정성 등의 단점으로 인한 사용상의 문제점이 노출되고 있다. 손상원인으로는 대기오염에 의한 대기가스와 산성비, 공기 중의 수분, 미세먼지, 황사 등에 의해 wax가 노화되어 코팅력이 저하되고, 이로 인해 보존처리 후 짧은 시간 내에 재 부식이 발생한다. 또한 wax의 노화로 색상변화 및 광택변화가 일어나 표면 이질감을 주기도 한다. 이러한 문제점들은 장기간 지속되어 왔으며 이를 개선하기 위한 재료의 개발이 필요한 실정이다. 이에 본 연구에서는 기존에 사용되어지고 있는 wax 코팅제들을 분석하여 각각의 특성과 용도별로 부족한 점들을 파악하여 보다 개선된 wax 코팅제를 개발하였으며, 야외 폭로실험과 인공 산성비 실험을 통해 환경 변화에 따른 표면 코팅 변화양상을 확인해본 결과 기존 재료들 보다 야외 폭로실험결과 약 4배, 인공 산성비 실험 결과 약 1.5배 이상의 우수한 부식방지 및 차단 효과를 나타내었다. 또한 색도 및 광택도, 접촉각, 박막두께 등의 물성 측정을 통해 기존에 사용되어온 wax보다 박막두께는 약 1.3 ~ 1.8배 두껍지만 고른 피막을 형성해 외부 환경으로 부터의 차단성 및 내구성이 우수하고 색도 및 광택도도 기존의 재료와 유사한 물성을 보여주어 기존에 사용되어온 wax 코팅제를 대체할 수 있는 재료로 판단된다.
미얀마 바간유적 파야톤주 사원벽화의 채색층은 다양한 요인으로 인해 손상이 발생된 상태이다. 본 연구에서는 미얀마 전통 접착제인 님(Neem) 수지를 대상으로 채색층 고착처리제로서의 적용 가능성을 확인하였다. 대조군으로 소아교와 Paraloid B-72를 선정하였으며, 원 벽화와 유사한 조건의 의사시료를 제작하여 고착제 도포 전·후 및 열화실험에 따른 변화양상을 확인하였다. 연구 결과, 님 수지는 농도가 높아짐에 따라 표면의 얼룩, 황변, 광택 등의 변화가 다른 고착제에 비해 크게 나타났으나, 4% 조건에서는 비교적 적은 변화가 확인되었다. 색도 및 광택도 역시 고착제 도포 전·후로 변화폭이 큰 것으로 확인되나, 다른 농도와 비교했을 때 4% 농도에서 낮은 경향이 확인되었다. 또한 고착강도의 경우, 님 수지의 농도가 높아짐에 따라 다른 고착제에 비해 바탕칠층 및 채색층에 대한 고착 능력이 전반적으로 우수한 점을 알 수 있었다. 따라서 환경요인에 따른 적은 표면변화, 낮은 색차 및 광택도, 우수한 고착강도의 특성들을 보았을 때 님 수지 4%의 조건에서 채색층 고착 처리제로서의 적용 가능성을 확인할 수 있었으며, 이는 향후 파야톤주 사원벽화 보존처리를 위한 기초 자료로 활용될 수 있을 것으로 사료된다.
본 연구는 한국 남부지역의 주요 조경수 가시나무(Quercus myrsinifolia), 종가시나무(Quercus glauca), 참가시나무(Quercus salicina), 동백나무(Camellia japonica), 왕벚나무(Prunus × yedoensis) 등 5수종을 대상으로 계절별 미세먼지 흡착량 및 수종별 잎 표면 미세구조와의 관계를 연구하였다. 계절별 미세먼지 흡착량 범위는 1월(31.51~110.44 ㎍/cm2), 11월 (23.20~79.30 ㎍/cm2), 5월(22.68~76.90 ㎍/cm2), 8월(9.88~49.91 ㎍/cm2) 순으로, 8월보다 1월에 54.4% 더 높은 미세먼지 흡착량을 보였다. 잎 표면에 홈이 있고 털을 갖고 있으며, 왁스층 함량이 높은 Q. salicina는 미세먼지 입자 크기별 흡착량이 높게 유지되었으며, 광택이 있고 잎 표면이 매끄러우며, 왁스층 함량이 낮은 C. japonica와 Prunus × yedoensis는 계절별 미세먼지 흡착량이 낮았다. 엽면적 크기, 기공밀도 및 기공 길이의 증가는 PM 흡착량의 감소와 관련이 있고 반면, 잎 표피 거칠기, 왁스층 함량, 기공 폭의 증가는 PM 흡착량의 증가와 관련이 있었다. 또한, 잎 표면 왁스층 함량이 증가할수록 잎 표면 PM 흡착량도 증가하였으며, PM10, PM2.5 보다는 PM0.2와 관련이 높은 것으로 확인되었다. 또한, 앞으로 개별 수종에 대한 미세먼지 저감 효율을 정량적으로 판단할 수 있는 기준을 통한 저감 수종 선발과 더불어 미세먼지 저감을 위한 숲 조성 가이드라인 또한 제시되어야 할 것으로 판단된다.
Objectives : This study was performed to approach of properties-flavours theory and the study of morphological standard in CORNI FRUCTUS. Methods : The properties-flavours theory were attempted with bibliographic method and various climate-information. The external-internal morphological standards were determined by using stereoscope and butanol series. Results and conclusion : 1. The significant analysis for the corni fructus as the properties-flavours theory, is a follow-up survey of the effect written in the official oriental medicine book. 2. The other analytic methods according to the gathering time, processing or storing system or especially nature or growth environment(altitude, temperature,. the mean moisture, and the agronomical survey) by way of the explanation of properties-flavours theory appears so many insufficiency at the many cases. 3. The external and internal characteristics according to the shape of original plant or herbal states, entirely correspond to all the literature on this subject. 4. According to the place of production, there are some different points. (l) In the external shapes, it is reasonable that if we make the basic standard of classification by the sharpness of color, the existence of gloss and the size of products. In the case of the Korean products, it shows bright and glossy color totally, but in the case of North Korea products, it shows black and lackluster. And in the case of the foreign products, it has softer body than Korea one and shows white color on the surface. (2) In the internal shapes, the Korea products has a thicker cuticle layer than the foreign one, and has fewer ca-oxalate in the parenchyma cell.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.