• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.985-990
• /
• 2002

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.573-578
• /
• 2003

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface

• Journal of the Korean Society of Costume
• /
• v.52 no.8
• /
• pp.109-122
• /
• 2002

This study is to understand cotton Tyeollik construction of the middle Chosun Period through the reconstruction of tyeoilik which was excavated from lady kim's tomb (from sooncheon). The form of excavated Tyeollik classified into two types by the location of waistline. The structure of excavated tyeollik classified into three types by the construction(one-layer, two-layer, cotton/quilt) The form type change according to the period. The change of the form type has the close relation structure type in the tyeollik. Cotton-tyeollik belongs to the form of the front time. The construction of cotton tyeollik is similar with the one-layer Tyeollik Exception the construction of git(collar) and the size and direction of the fold. The surface pattern is composed of two-pieces but the liner is one-piece in the Git(collar). and In The size of fold surface is o.2-o.3cm, and liner is 0.5-0.8cm. The direction of fold in the liner is the contrast with the surface.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.969-972
• /
• 2008

This study investigated the effect of the fundamental condition such as release agent, form conditions and types to the surface of concrete with aluminum form on the various temperatures. On the observation with the naked eyes, coated plywood and aluminum form without a scratch showed similar result, and the surface quality of the concrete with aluminum form was gradually decreased corresponding to the increase of the temperature.For the surface roughness, there is no remarkable tendency according to the temperature. However, the difference in accordance with release agent occurred.As void on the surface corresponding to the various temperature, the micro voids ranged $0.1{\sim}1mm$ were increased corresponding to the increasing temperature, so it was confirmed that the chemical reaction wae accelerated. And the voids of the other range also increased. the fundamental condition such as release agent, form conditions and types

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.6-7
• /
• 2021

Although the development of free-form architectural technology continues, it consumes a lot of money and time due to the one-time formwork and the difficulty of maintaining quality due to manual work. To this end, in this study, a shape connection technique was proposed and verified to improve the limitations of implementing the curved surface of the existing lower multi-point press. In order to improve the accuracy of the shape, a curved surface was implemented using a silicon cap and a silicon plate. As a result of the error analysis of the shape, a small value of less than 3 mm was found. This study can implement more accurate curved surfaces than conventional technologies and produce high-quality free-form panels.

• Journal of Periodontal and Implant Science
• /
• v.31 no.2
• /
• pp.451-463
• /
• 2001

Following the extensive use of implant, the incidence of peri-implantitis increases. Guided bone regeneration has been used for the optimal treatment of this disease. Because implant surface was contaminated with plaque and calculus, cleaning and detoxification were needed for the reosseointegration when guided bone regeneration was performed. Various mechanical and chemical methods have been used for cleaning and detoxification of implant surface, air-powder abrasive and oversaturated citrate were known to be most effective among these methods. However, these methods were incomplete because these could not thoroughly remove bacteria of implant surface, moreover deformed implant surface. Recent studies for detoxification of the implant surface using laser were going on, $CO_2$ laser and Soft Diode laser were known to be effective among these methods. The purpose of this study was to obtain clinical guide by application these laser to implant surface. 15 experimental machined pure titanium cylinder models were fabricated. The $CO_2$ laser treatment under dry, wet and hydrogen peroxide condition or the Soft Diode laser treatment under Toluidine blue O solution condition was performed on the each of models. Each groups were examined with SPM and SEM to know whether their surface was changed. The results were as follows : 1. Surface roughness and surface form weren't changed when $CO_2$ laser was usedunder dry condition(P>0.05). 2. Surface roughness and surface form weren't changed when $CO_2$ laser was used under wet condition(P>0.05). 3. Surface roughness and surface form weren't changed when $CO_2$ laser was used under hydrogen peroxide condition(P>0.05). 4. Surface roughness and surface form weren't changed when Soft Diode laser was used under toluidine blue O solution condition(P>0.05). From the result of this study, it may be concluded that the $CO_2$ laser having relatively safe pulse mode and the Soft Diode laser used with photosensitizer can be used safely to treat peri-implantitis.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.2
• /
• pp.124-131
• /
• 2008

This paper presents the analysis of resistance performance and bow waves for the resistance-minimized hull form of small fishing boat by using numerical simulations and model tests. The resistance-minimized hull form is developed from an original hull form which is selected from existing small fisher boats in our country. In order to estimate the resistance performance for the original and the developed hull form, several numerical simulations and model tests are carried out. Marker and Cell(MAC) method and Marker-Density method are adopted to simulate the free-surface bow waves around advancing hull surface. The results of numerical simulations are compared with the model tests in towing tank. The results show that the resistance performance of the resistance-minimized hull form is improved than that of the original hull form. The results of this study will be a good guide to the hull form development of small fishing boats in future.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.3-10
• /
• 1990

Hull form can be described numerically by two approaches, one is to describe a hull form with a set of curves("curve approach"), and the other is to describe it with surfaces directly("surface approach"). This paper describes the numerical definition scheme of hull form using curve approach method which defines the hull form by a set of curves consisting of 2-dimensional transverse section curves and 3-dimensional longitudinal curves. A set of curves in the hull form definition scheme is described by the modified cubic spline which modified the general parametric cubic spline in order to ensure a very smooth curvature distribution within the curve segment even though a curve segment has large tangent angle at its end points. Illustrative examples are given showing the application of the method to represent the hull form of SWATH ship and oceanographic research vessel. Also, examples for hull form transformation are shown by using this method connected with transformation technique.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.43-52
• /
• 1998

This study was to analyze properties of the foot form through a development figure of the surface area by factor analysis, cluster analysis, and reglation analysis. This study was performed 71 college women between 19 adn 23 years old residing in Pusan urban area. The result was as follows; 1. There are four factors selected by factor analysis. The 1st factor signifies the surface area of the toe. The 2nd factor signifies the surface area between Metatarsal circumfer-ence and Tarsal circumference. The 3rd factor signifies the surface area between Toe circumference and Metatarsal circumference. The 4th factor signifies the surface area between Heel-ankle circumference. 2. There are three clusters selected by fast cluster. Cluster 1 : The foot size, most parts of foot surface area and total foot surface area are relatively small to other clusters, but the surface area between Metatarsal circumference and Tarsal circumference is relatively large to other clusters. Cluster 2 : The foot size, all parts of foot surface area and total foot surface area are relatively large to other clusters as Cluster 1, but the surface area of the sole of the heel and the ankle is relatively large to other clusters. 3. Total surface area of the foot=-274.94+24.01* Foot lengh+9.28*Metatarsal circumference.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.77-84
• /
• 2007

As a life cycle of product bas shortend, Rapid prototypiug has come into the spotlight to shortened the time of producint a prototype. But It followed in laminated directivity and of the prototype production which is decided the interference which Beccuase of invisible rough surface, some inferences have occured during an assembly hour. Consequently, This study on rapid prototyping has parameter to determine surface roughness and surface form precision of total shape. In order to improve Surface form precision, it can control parameters which are Laminate Height, Layer Hatch Overcue, Fill Cure Depth. In addition, we found the parameter which have a deep effect on surface roughness among various parameters, and then, tried to reduce the interference that can be occurred by surface roughness during assembly.