• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.147-158
• /
• 2008

In this study, fermentation characteristics of waste agricultural and forest biomass for production of heat energy were focused to be used in agricultural farm households. The purpose of this study was focused on seeking practical utilization of agricultural and forest biomass wastes in agricultural farm households in the form of thermal energy by means of simple fermentation process. Fermentation process was performed in terms of different raw-materials and their mixture with different ratios. Urea, lime, and bioaids were added as fermenting aids. Moisture contents of fermenting substrates were adjusted to 55~65%. In order to optimize the fermentation process various factors, such as raw-materials, moisture contents, amount of fermenting aids, and practical measurement of hot-water temperature during fermentation were carefully investigated. The optimum condition of fermenting process were obtained from hardwood only and hardwood: softwood (50 : 50) beds. In case of hardwood only the highest temperature was recorded between 60 to $90^{\circ}C$ the lowest temperature was determined to more or less $40^{\circ}C$ and the average temperature was ranged to $50{\sim}60^{\circ}C$ and this temperature ranges were maintained up to 20~30 days. The optimum amount of additives were estimated to ca. 15 kg of urea, 20 kg of bioaids, and 10 kg of lime for 1 ton of substrate. To reach the highest temperature the optimum moisture content of fermenting substrate was proved to 55% among three moisture content treatments of 45%, 55% and 65%. The temperature of hot-water tank installed in fermenting bed of hardwood : grass (50 : 50) showed very different patterns according to measuring positions. In general, temperatures in the mid- and upper-parts of substrate piling were relative higher than lower and surface parts during 45-day fermentation process. The maximum temperature of fermenting stage was determined to $65^{\circ}C$, minimum temperature, more or less $40^{\circ}C$, and average temperature was $60^{\circ}C$. The water temperature of tank exit was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. It could be concluded that fermentation process of waste agricultural and forest biomass produces a considerable amounts of heat, averaging about $50{\sim}60^{\circ}C$ for maximum 3 months by using the heat exchanger (HX-helical type).

• Korean Journal of Plant Taxonomy
• /
• v.31 no.3
• /
• pp.283-309
• /
• 2001

Acer pictum complex (A. pictum Thunb. ex Murray with varieties, A. okamotoanum Nakai, A. truncatum Bunge) in eastern Asia causes frequent difficulty in identification. One hundred twenty five specimens from A. pictum complex of China, Korea and Japan and A. cappadocicum var. sinicum of China were compared to investigate patterns of intra- and interspecific variation and to evaluate a recognition of several species as well as many varieties using 22 characters for morphometric analysis. The first three PCA accounted for 59% of the total variance. No strong discontinuities existed among taxa with respect to fruit and leaf characters. Much overlap among all taxa occurred the central region of the scatter diagram. Many characters appeared to show some clinal variation with changes from east of China to Japan through Korea. This was true not only when all species as considered as a single taxon, but when characters of individual taxa were compared with geography. As one considers a path from the western part of the ranges to areas to the east, the leaves become larger in most respects and become increasingly many lobed (five to seven or nine). In general, there was a tendency toward larger nutlet with smaller wing in the area toward northeast of China (=A. truncatum), while in the east of ranges (Island Ullung-do), plants were larger with respect to characters of fruit and leaves (=A. okamotoanum). The morphological differentiation between A. okamotoanum and Japanese and Korean individuals of A. pictum was not considered sufficient to warrant recognition of either specific or varietal status and should be treated as con specific under A. pictum var. mono. Since the lectotype of Acer pictum had minute hairs uniformly on the under surface of leaves(A. pictum var. pictum), the glabrous type of A. pictum was called A. pictum var. mono as Ohahsi suggested. The univaraite analysis (the mean and maximum/minium of nutlet size and wing/nutlet length ratio) indicated geographical differentiation of northeastern populations, A. truncatum, was distinctive, but Korean individuals of A. truncatum showed an affinity between Chinese individuals of A. truncatum and Korean individuals of A. Pictum var. mono. The current results, together with qualitative character, trunk features, justify subspecific status for this taxon. The previous varieties of A. mono in Korea were indistinguishable from typical form of A. Pictum var. mono on the basis of the wing angle and nutlet size, rejecting continued recognition of these taxa as distinctive varieties. Therefore, it is recommended that only one polymorphic species of A. pictum be recognized in addition to three varieties.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.339-350
• /
• 2003

The purpose of this study was to investigate the micro-implant height and anterior hook height to prevent maxillary six anterior teeth from lingual tipping and extruding during space closure. We manufactured maxillary dental arch form, bracket and wire, using the computer aided three-dimensional finite element method. Bracket was $.022'{\times}.028'$ slot size and attached to tooth surface. Wire was $.019'{\times}.025'$ stainless steel and $.032'{\times}.032'$ stainless steel hook was attached to wire between lateral incisor and canine. Length of hook was 8mm and force application points were marked at intervals of In. Four micro-implants were implanted on alveolar bone between second premolar and first molar. The heights of them were 4, 6, 8, 10mm starting from wire. We analyzed initial displacement of teeth by various force application point applying force of 150gm to each micro-implant and anterior hook. The conclusions of 4his study are as the following : 1. When the micro-implant height was 4m and the anterior hook height was 5mm and below, anterior teeth were tipped lingually. When the anterior hook height was 6mm and above, anterior teeth were tipped labially. 2. When the micro-implant height was 6mm and the anterior hook height was 6mm and below, the anterior teeth were tipped lingually. When the anterior hook height was 6m and above, the anterior teeth were tipped labially. But lingual tipping of anterior teeth decreased and labial tipping Increased when the micro-implant height was 6mm, compared with 4mm micro-implant height. 3. When the micro-implant height was 8mm and the anterior hook height was 2mm, the anterior teeth were tipped lingually. When the anterior hook height was 3mm and above, labial tipping movement of the anterior teeth increased proportionally. 4. When the micro-implant height was 10mm and the anterior hook height was 2mm and above, labial tipping of the anterior teeth increased proportionally. 5. As the anterior hook height increased, aterior teeth were tipped more labially. But extrusion occurred on canine and premolar area because of the increase of wire distortion. 6. Movement of the posterior teeth was tipped distally during maxillary six anterior teeth retraction using micro-im plant because of the friction between bracket and were Based on the results of this study, we could predict the pattern of the tooth movement according to position of micro-implant and height of anterior hook. It seems that we can find the force application point for proper tooth movement in consideration of inclination of anterior anterior teeth, periodontal condition, overjet and overbite

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.226-237
• /
• 2005

Purpose : Extensive defect of oral and maxillofacial area is usually reconstructed with composite flap including skin paddle. However, if the defects are lined with only skin components, the mucosa's role in mastication and texture are not restored. Furthermore, stiffness and hair-growing prevent denture rehabilitation and good oral hygiene. This study was performed to overcome the disadvantages of composite soft tissue flaps including the skin and to make a model for myo-mucosal flaps. Materials and methods : Buccal mucosa sized $0.5\times1.0\;cm^2$ from New Zealand rabbit (around 1.5kg) was harvested and cultivated by the modification of Rheinwald and Green's keratinocyte culture method. Cultured mucosa was grafted on the fascia of latismus dorsi as form of mucosal sheet. After 7, 10, 14 days, the myomucosal flap was excised and evaluated under light microscope with H & E and immunohistochemical staining. As control group, harvested buccal mucosa from rabbit was transplanted to gracilis muscle(n=6). Results : From 7 days after prelamination, the basal layer of the grafted mucosa resembled that of normal mucosa. As control group, transplanted mucosa had original shape but there's slight inflammatory reaction. Prelaminated mucosa has 19.8$\pm$4.59 cell layers and some samples have more than 20 layers. The expression rate of PCNA was relatively strong (42.9%$\pm$14.1) at the basal layer of grafted mucosa and the laminin was found at the basal layer. On the contrary, prelaminated mucosa at 10 days showed moderate expression rate of PCNA(32.4%$\pm$4.62). We found the mucosal layer was somehow disappeared and there is strong inflammatory reaction. After 14 days prelamination, the grafted oral keratinocytes were almost disappeared and expression of PCNA was not observed. Conclusion : We can make 75 fold large mucosal($3850mm^2$) sheet from small samples of mucosa $(50mm^2)$. Epithelial sheet that grafted on the fascia of muscle underwent differentiation and proliferation. But after 10, 14 days, there was strong inflammatory reaction and the grafted mucosa was destroyed from surface layer. In rabbit model, transfer of fascio-mucosal flap should be done from 7 to 10 days after prelamination.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.187-201
• /
• 2008

Objective: The aim of this study was to determine whether cortical punching stimulates the expression of matrix metalloproteinase-1, -8, and -13 in orthodontic tooth movement in rats. Methods: A total of 32 male sprague-dawley rats at 15 weeks old were divided into two groups of 16 rats each, to form the tooth movement with cortical punching (TMC) group and tooth movement only (TM) group. A total of 20 gm of orthodontic force was applied to rat incisors to cause experimental tooth movement. Cortical punching was performed on the palatal side near the central incisor with a 1.0 mm width microscrew in the TMC group. The duration of tooth movement was 1, 4, 7, and 14 days. Results: Measurements of the mRNA expression were selected as the means to determine the identification of expression of MMP-1, -8, and -13. In the TMC group, the expression of collagen type I was greater than that of the TM group from day 4 to day 14. Expression of TIMP-1 in the TM group was greater than that of the TMC group in the pressure side of PDL and alveolar bone cell at day 4. In the TMC group, TIMP-1 was expressed at the osteoclast, but not at the tooth surface of the TM group at day 14, Maximum induction of the mRNA of MMP-1 was observed on day 4 in the TMC group, but it was observed on day 7 in the TM group. MMP-8 mRNA of the TMC group was twice greater than that of the TM group at f days. In the TMC group, maximum induction of MMP-13 mRNA was observed on day 1. Conclusions: These findings suggested that cortical punching can stimulate remodeling of PDL and alveolar bone connective tissues during experimental orthodontic tooth movement in rats.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.62-73
• /
• 2000

Purpose: Esophageal cancer patients have a difficulty in the intake of meals through the blocked esophageal lumen, which is caused by an ingrowth of cancer cells and largely influences on the prognosis. It is reported that esophageal cancer has a very low survival rate due to the lack of nourishment and immunity as the result of this. In this study a new radioactive stent, which prevents tumor ingrowth and restenosis by additional radiation treatment, has been developed. Materials and Methods: Using ${\ulcorner}HANARO{\lrcorner}$ research reactor, the radioactive stent assembly ($^{166}Ho$-SA) was prepared by covering the metallic stent with a radioactive sleeve by means of a post-irradiation and pre-irradiation methods. Results: Scanning electron microscopy and autoradiography exhibited that the distribution of $^{165/166}Ho\;(NO_3)$ compounds in polyurethane matrix was homogeneous. A geometrical model of the esophagus considering its structural properties, was developed for the computer simulation of energy deposition to the esophageal wall. The dose distributions of $^{166}Ho$-stent were calculated by means of the EGS4 code system. The sources are considered to be distributed uniformly on the surface in the form of a cylinder with a diameter of 20 mm and length of 40 mm. As an animal experiment, when radioactive stent developed in this study was inserted into the esophagus of a Mongrel dog, tissue destruction and widening of the esophageal lumen were observed. Conclusion: We have developed a new radioactive stent comprising of a radioactive tubular sleeve covering the metallic stent, which emits homogeneous radiation. If it is inserted into the blocked or narrowed lumen, it can lead to local destruction of the tumor due to irradiation effect with dilatation resulting from self-expansion of the metallic property. Accordingly, it is expected that restenosis esophageal lumen by the continuous ingrowth and infiltration of cancer after insertion of our radioactive stent will be decreased remarkably.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.140-147
• /
• 1985

This experiment was conducted in the field to investigate the effects of mulched condition on nutrient's mineralization and its mobility as affected by environmental changes (soil moisture and soil temperature) in the plow layer. 1. Nitrogen mineralization was faster owing to the prevention of evaporation and the increase of soil temperature in the poly ethylene mulched plot. As a result, nitrate form of nitrogen was much earlier available for plant in mulched plot than in non mulched plot. 2. Available $P_2O_5$ content in the plow layer was kept highest in the fertilized zone (10-20 cm depth) regardless of difference between mulched and non mulched condition, and was nearly constant without showing difference between planting and non planting of tobacco due to the lower availability of phosphorus by tobacco. 3. Potassium applied in the plow layer was remained a large quantity until the latter growth stage resulting in the lower recovery of potassium by tobacco. 4. Mineralized nutrients such as $NH_4-N$, $NO_3-N$, and K in the plow layer of mulched plot were transported from the fertilized layer (10-20 cm depth) and accumulated to the surface layer (0-10 cm depth) as the growing time goes by, but those in non mulched plot were distributed to the deeper layer. 5. Mobility of available nutrients in the plow layer was If order as $NO_3-N$ $$\geq_-$$ $NH_4-N$ > K > available $P_2O_5$. 6. Leaching degree of mineralized nutrients in the mulched plot was much lower than in the non mulched plot.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.64-84
• /
• 2002

These studies were conducted to evaluate the Properties of lactic acid Producing bacteria(LAB), isolated from broiler and laying hens cecum and select the optimum strains to improve the performance, environment of poultry house, immunity, and intestinal microflora of broiler and laying hens. In experiment I , 23 LAB strains were isolated from broiler and laying hens cecum as a colony form. Six strains were selected by acid tolerance, bile salt tolerance, viability, enzyme release, antagonism, and antibiotics susceptibility. In Experiment II, selected LABs from Ex. 1 were conducted to investigate the effects of feeding various Lactobacillus on performance, nutrients digestibility, intestinal microflora, villi development and observation of epithelium surface, blood chemicals and fecal noxious gas of broiler chicks. One thousand eighty one day old broiler chicks were fed into Lactobacillus crispatus avibrol(LCB), Lactobacillus reuteri avibro2(LRB), Lactobacillus crispatus avihen1(LCH), and Lactobacillus vaginalis avihen2(LVH) at the level of 10$^4$ and 10$\^$7/cfu/g diet. Weight gam of chicks fed Lactobacillus tended to increase from the first week and was higher from 50 to 100g in Lactobacillus treatments than control. Feed intake and feed conversion were not statistically different of all treatments. Dry Matter digestibility of Lactobacillus treatments was prone to improve compared to that of control, but was not significantly different. Protein and Ca digestibility were also tended to improve in Lactobacillus treatments relative that of control. Lactobacillus treatments showed improved tendency in crude ash and fat compared to those of control, whereas phosphorus digestibility was not consistency. Nutrients digestibilities of bird fed LCH were superior to those of other treatments, It showed significantly higher in Ca and P digestibility than control(P〈0.05). Total Lactobacillus spp. of birds fed various Lactobacillus was significantly higher in illeum for five weeks(P〈0.05), but was not different at cecum. Yeast was thought to be not completely attached to intestinal lumen for one week. However, total number of yeast was significantly increased in cecum and illeum of three weeks old chicks (P〈0.05). The number of anaerobes exhibited to tendency the increase in Lactobacillus treatments from one week old of age at both ileum and cecum.