• 한국지리정보학회지
• /
• 제1권1호
• /
• pp.99-108
• /
• 1998

국지 기상 모형의 지표 특성을 표현하기 위해 토양 구분, 식생 구분, 지표 거칠기 길이, 지표 알베도와 엽면지수가 지면 과정 모수화 내에서 처방되어야 한다. 이 연구에서는 인공위성 관측값으로부터 계절함수로 얻어진 경,위도 1도 및 1도의 엽면지수, 지표거칠기 길이, 눈이 없을 때의 지표 알베도와 상세 격자 NDVI를 지면 과정 모형에 적용하였다. 생물권과 대기권 사이, 지면과 대기 사이의 상호작용에서 이러한 인공위성 자료를 사용한 것과 사용하지 않은 것을 비교함으로써, 열, 에너지 및 수증기 속들, 지면 기온, 바람, 식생 물함유량, 비습, 강수장의 민감도가 조사되었다.

• 한국제4기학회지
• /
• 제23권1호
• /
• pp.42-53
• /
• 2009

최근 급격한 온실가스 증가에 기인하여 대기와 해양 그리고 빙권의 변화가 나타나고 또한 기온과 수분의 함량 변화에 따라서 지표 환경도 서서히 변하기 시작하는 것으로 보고되고 있다. 지표환경의 반응은 생지화학적 반응과 생물리학적 반응으로 구분 할 수 있는데, 생지화학적 반응은 기후변화에 따른 광합성이나 이와 유사한 지표환경의 변화 그리고 이에 따른 화학적인 피드백을 지칭하며 이는 대기의 온실가스 농도를 변화 시키는 역할을 한다. 생물리학적 반응은 기후변화에 따라 식생의 분포가 변하게 되고 이에 따른 태양에너지의 입사율 변화 등과 같은 물리적 반응을 나타낸다. 과거 기후변화역사에도 식생의 변화가 기후변화에 미치는 영향이 매우 컸던 경우가 있었고, 앞으로의 기후변화는 거대하고 급격하게 일어날 것으로 예측되기 때문에, 미래 기후변화의 정확한 예측을 위해서는 지표환경변화의 물리 화학적 변화를 이해하고 예측 모형에 정확히 포함시킬 필요가 있다.

• 한국유체기계학회 논문집
• /
• 제7권3호
• /
• pp.32-38
• /
• 2004

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard $k-{epsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• 한국환경과학회지
• /
• 제15권7호
• /
• pp.653-657
• /
• 2006

Based on the monthly weather report of Korea Meteorological Administration (KMA) and daily sea surface temperature (SST) data from National Fisheries Research and Development Institute (NFRDI) (1995-2004), mean heat fluxes were estimated at the port of Yeosu. Net heat flux was transported from the air to the sea surface during February to September, and it amounts to $205 Wm^{-2}$ in daily average value in May. During October to January, the transfer of net heat flux was conversed from the sea surface to the air with $-70 Wm^{-2}$ in minimum of daily average value in December. Short wave radiation was ranged from $167 Wm^{-2}$ in December to $300 Wm^{-2}$ in April. Long wave radiation (Sensible heat) was ranged from $27 (-14) Wm^{-2}$ in July to $90 (79) Wm^{-2}$ in December. Latent heat showed $42 Wm^{-2}$ with its minimum in July and $104 Wm^{-2}$ with its maximum in October in daily average value.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.11-19
• /
• 2010

A code is developed to simulate incompressible free surface flows using the Roe's flux-difference splitting scheme. An interface of two fluids is considered as a moving contact discontinuity. The continuities of pressure and normal velocity across the interface are enforced by the conservation law in the integral sense. The fluxes are computed using the Roe's flux-difference splitting scheme for two incompressible fluids. The interface can be identified based on the computed density distribution. However, no additional treatment is required along the interface during the whole computations. Complicated time evolution of the interface including topological change can be captured without any difficulties. The developed code is applied to simulate the Rayleigh-Taylor instability of two incompressible fluids in the density ratio of 7.2:1 and the broken dam problem of water-air. The present results are compared with other available results and good agreements are achieved for the both cases.

• 한국전산유체공학회지
• /
• 제12권4호
• /
• pp.7-13
• /
• 2007

Numerical analysis is carried out for combined heat transfer in an indirected NIR(Near Infrared Ray) heating chamber. Reynolds number and shapes of absorbed cylinder are known as important parameters on the combined heat transfer effects. Reynolds number based on the outer diameter of the cylinder is varied from $10^3$ to $3{\times}10^5$. Four difference heat transfer regimes are observed: forced convection and radiative heat transfer on the outer surface of the cylinder, pure conduction in the cylinder body, pure natural convection and radiation between lamp surface and inner surface of the cylinder, and radiation from the lamp. Flow and temperature characteristics are presented with iso-contour lines for the absorbed circular and elliptic cylinders to compare their differences. The convective and radiative heat transfer fluxes are also compared with different Reynolds numbers. As usual, Reynolds number is an important factor to estimate increasing convective heat transfer as it increases. The shape of absorbed cylinder results overall heat transfer rates remain unchanged.

• Nuclear Engineering and Technology
• /
• 제25권1호
• /
• pp.136-147
• /
• 1993

본 논문은 다음의 내용을 기술한다 : ⅰ) 토카막 플라즈마의 경계면을 정의하고 계산하는 폴로이달 자속의 수학적 모형을 플라즈마경계면과 등자속면이 일치한다는 사실로부터 수립한다. 따라서 플라즈마의 경계위치를 제어한다 함은 리미터 접선상의 여러 점들에서 자속값을 같게 만드는 것을 의미한다. ⅱ) 자속, 자장, 자장구배의 선형조합으로 최외각 폴로이달 등자속면을 측정하는 방법을 제시한다. 이 방법은 내부플라즈마변수를 알 필요가 없어서 폴로이달베타와 플라즈마전류분포의 변동에 따르는 수정이나 진공용기의 유도전류를 보상하지 않아도 된다. ⅲ) 플라즈마의 경계면 위치조정을 위한 궤환제어 알고리즘을 수립하고, PID 제어이론을 기초로 해당 전자장비를 제작한다. ⅳ) 본 플라즈마 제어계를 사용한 RTP토카막 실험의 결과를 논의한다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.385-390
• /
• 2003

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Wavier-Stokes equations with standard $k-{\varepsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• 센서학회지
• /
• 제22권5호
• /
• pp.346-351
• /
• 2013

We developed a one-step method for fabrication of addressable suspended SWNT films and demonstrate excellent detection performance of paraoxon based on OPH-immobilized SWNT films for environmental monitoring. For dispersed SWNT suspension, COOH-SWNT was prepared by the oxidation of carbon nanotubes using acid treatment and sonication. Suspended SWNT-film was fabricated between cantilever electrodes by dielectrophoretic force and surface tension of the water meniscus. After that, OPH were immobilized on suspended SWNT-films by nonspecific binding for enzymatic hydrolysis of paraoxon. The electrical properties of the SWNT films were measured in real time at room temperature. Structurally suspended SWNT films from substrate surface made possible rapid and highly sensitive detection of target molecules with increased convectional and diffusional fluxes of the molecules and with a large binding surface area. SWNT film FET resulted in a real-time, label-free, and electrical detection of paraoxon to the concentration of ca. $10{\mu}m$ with a step-wise rapid response time of several seconds.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3704-3710
• /
• 2021

The characteristics of the external radiation on the surface of the casks for spent nuclear fuel (SNF) storage by dry method are investigated for the case when the spatial distribution of SNF in the basket changes due to the destruction of the fuel rod claddings. The surface areas are determined, where the changes in fluxes of neutrons, produced by ²⁴⁴Cm actinide, and γ-quanta, produced by long-lived isotopes, are maximum in the result of the decrease in the height of the SNF area. Concrete (VSC-24) and metal (SC-21) casks are considered as examples. The procedure of periodic measurement of the dose rate of neutrons or γ-quanta at the specified points of the cask surface is proposed for identifying the fuel rod cladding destruction. Under normal operation, the decrease in the dose rate produced by neutrons as the function of SNF storage duration is determined by the half-life of ²⁴⁴Cm, and for γ-quanta - by the half-lives of long-lived SNF isotopes. Consequently, a stepwise change in the dose rate of neutrons or γ-quanta, detected by the measurements, as compared to the previous one, would indicate the destruction of the fuel rod claddings.