• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.709-717
• /
• 2002

In the apparel industry, the technology has been advanced rapidly. The use of 3D scanning systems fur the capture and measurement of human body is becoming common place. Three dimensional digital image can be used for design, inspection, reproduction of physical objects. The purpose of this study is to develop a method that drafts men's basic bodice pattern from scanned 3D body surface shape data. In order to pursue this purpose the researchers developed pattern drafting algorithm. The 3D scanner used in this study was Cyberware Whole Body Scanner WB-4. The bodice pattern drafting algorithm from 3D body surface shape data developed in this study is as follows. First, convert geometric 3D body surface data to 3D polygonal mesh data. Second, develop algorithm to lay out 3D polygonal patches onto a plane using Auto Lisp program. The polygon meshes are coplanar, and the individual mesh is continuously in contact with next one The bodice front surface shape data in polygonal patches form was lined up in bust and waist levels. The back bodice was drafted by lining up the polygonal mesh in scapula, chest, and waist levels. in the drafts, gaps between polygons were formed into the darts.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.3 s.153
• /
• pp.248-257
• /
• 2007

Turbulent flows around a sailing yacht hull were calculated using CFD technique. Grid system was generated by using Gridgen package and Fluent package was used to calculate flows around a 30ft-class yacht hull designed by MOERI. The drafts at starboard and port sides of a yacht. when the hull was heeled, were determined by adjusting the same displacement in the generated grid system. Pressure distribution on the sailing yacht hull was obtained and the changes of drag and side force by heel and leeway variation were shown. The flow calculations have been carried out both with and without free surface, and keel and rudder were included for both cases. It was found that the calculated results with free surface gives better agreement with experiments than those without free surface, although there are still a room for the improvement in correct prediction of forces.

• Journal of Fashion Business
• /
• v.5 no.2
• /
• pp.49-65
• /
• 2001

This thesis aims to reveal the unsatisfactory unfitting factors in the tight collars of adult males' dress shirts for the purpose of improving neck-collar fitness. For this study, nine adult males were chosen as the subjects. When the subjects erected their necks upright, the researcher conducted an experiment, using the direct anthropometrical measuring method and the gypsum method by turns, in order to understand neck shapes by way of right-neck lateral flection, left-neck lateral flection, neck flection, neck extension, right neck rotation, and left neck rotation. And then, the propriety of allowances from body surface alteration was verified by analyses through the measurement of wearing comfortableness and clothing pressure in two sorts of ready-made dress shirts, which had different allowances. The consequences of this study are as follows: 1. In length alteration to movement, a decrease was found in the opposite (and an increase in the identical) directions of right-neck lateral flection, left-neck lateral flection, and neck flection movements. Also, when the subjects shook their heads, an increase was seen by 0.42$\sim$0.63cm in neck girth, 0.31$\sim$1.12cm in 3cm-above-the-neck base girth, and 1.16cm in neck extension of 3cm-above-the-neck base girth. 2. As a result of the drafts of surface measurement, the alteration ratios of dimensions and vertical length dropped in the identical directions of the movement, but grew in the opposite directions. A reverse change was shown in horizontal length. The rough widening gaps for making drafts were 0.7cm in front left and right, and 0.2cm in back left and right of 3cm-above-the-neck base girth. On the whole, the space was about 1.8cm, while there was no significant variation between the upright stationary test and the movement test. 3. There were important differences between the two kinds of ready-made dress shirts (Type A: 1cm allowance in neck girth; Type B: 2cm allowance) in clothing pressure and wearing comfortableness. That is, Type A had higher pressure and more uncomfortable sense of wearing. In other words, as clothing pressure and wearing comfortableness are negatively related to each other, Type A's greater clothing pressure led to worse wearing comfortableness.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2001.05b
• /
• pp.1133-1138
• /
• 2001

The focus of this paper is on the numerical investigation of obliquely incident wane interactions with a system composed of full submerged and floating dual buoy/vertical-flexible-membrane breakwaters placed in parallel with spacing. The fully submerged systems allow surface and bottom clearances to enable wave transmission over and under the system. The problem is formulated based on the two-dimensional multi-domain hydro-elastic linear wave-body interaction theory. The hydrodynamic interaction of oblique incident waves with the combination of the rigid and flexible bodies was solved by the distribution of the simple sources (modified Bessel function of fille second kind) tat satisfy the Helmholz governing equation. Using this computer program, the performance of various dual systems varying buoy radiuses and drafts, membrane lengths, clearances. spacing, mooring-lines stiffness, mooring types, water depth, and wave characteristics is thoroughly examined. It is found that the fully submerged and floating dual buoy/membrane breakwaters call, if it is properly tuned to the coming waves, have good performances ill reflecting the obliquely incident waves over a tilde range of wave frequency and headings.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.8
• /
• pp.1125-1136
• /
• 2000

Fitness of clothes becomes a major concern in apparel industry. Development of basic patterns will enhance the fitness of clothes. But there are few slacks patterns for the middle-high school girls. So girls had difficulties to buy ready-made clothes of good fit. To solve this problem, it is necessary to develop basic slacks patterns. The purposes of this study was to develop basic slacks patterns based on the analysis of lower body types. 4 girls were selected among 402 anthropometric measurement subjects who are 13 to 15 year-old for the wearing tests. The result of this study can be summarized as follows; 1. Analysing the replicas of lower body surface by using gypsum method, slack patterns were developed. 2. Wearing test by the sensory evaluation showed that the developed slacks pattern was estimated more highly than existing patterns in the items of the comfort of front crotch and back crotch. 3. Wearing test by moire topography method represented that garment silhouette of developed slacks pattern was estimated more highly and garment space of waist, hip were significantly different among patterns.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.3
• /
• pp.33-38
• /
• 2012

The aim of this experimental study was to analyze the effect of the shape parameters and chamber pressure of a land-based oscillating water column (OWC) in regular incident waves. The magnitude of the free surface elevations inside the chamber was measured in a two-dimensional wave tank for various chamber skirt drafts and bottom slope angles. The surface elevations were also measured under both open chamber and partially open chamber conditions. From these measurements, the optimum shape of the OWC device could be predicted for the maximum wave energy conversion efficiency. It was found that the resonance frequency of the OWC system associated with incident waves moved toward the long wave region with increments of the draft of the chamber skirt and bottom slope. The behavior of the free surface elevation inside the chamber was also found to be dependent on the chamber pressure.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.4
• /
• pp.245-252
• /
• 2020

Wave run-up is an important phenomenon that should be considered in ocean structure design. In this study, the wave run-up of a surface-piercing circular cylinder was calculated in the time domain using the three-dimensional linear and fully nonlinear numerical wave tank (NWT) techniques. The NWT was based on the boundary element method and the mixed Eulerian and Lagrangian method. Stokes second-order waves were applied to evaluate the effect of the nonlinear waves on wave run-up, and an artificial damping zone was adopted to reduce the amount of reflected and re-reflected waves from the sidewall of the NWT. Parametric studies were conducted to determine the effect of wavelength, wave steepness, and the draft of the cylinder on the wave run-up of the cylinder. The maximum wave run-up value occurred at 0°, which was in front of the cylinder, and the minimum value occurred near the circumferential angle of 135°. As the diffraction parameter increased, the wave run-up increased up to 1.7 times the wave height. Furthermore, the wave run-up was 4% higher than the linear wave when the wave steepness was 1/35. In particular, the crest height of the wave run-up increased by 8%.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.63-77
• /
• 1992

The purpose of this study is to improve clothing construction by analyzing form variation of upper trunk & upper arms with the use of plaster cast. Experimental research was performed by plaster gypsum method. The subjects were males between age 21 and 25, classified Standard somatotype by their bust size and Rorher Index. Arm movements were consisted of 5 types(0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 135$^{\circ}$, 180$^{\circ}$) to each vertical motion in front. The statistical analyses used in this study were mean, standard deviation, repeated mesure design. The result obtained from this study were as follows; 1. As a result of investigating into the rate of the expantion and contraction of basic body-surfact-lines, the side seam length showed the maxium rate of expantion in 180$^{\circ}$ degrees, the shoulder length showed the maxium contraction in the same degrees. 2. The variation of the upper part of the body form by increasing the upper limb motions, shoulder point was moved to be the inside or upside. And the anterior armfit point, posterior armfit point and armfit point were moved to upside. The form of the armhole-line in Drafts of a body surface was differently changed by increasing the movements. 3. Increasing the upper limb motions, the height of sleeve cap decresed and width of the sleeve decreased but girths of the sleeve cap was not show consistant change.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.11-21
• /
• 2001

The focus of this paper is on the numerical investigation of obliquely incident wav interactions with a system composed of fully submerged and floating dual buoy/vertical-flexible-membrane breakwaters placed in parallel with spacing between two systems. The fully submerged two systems allow surface and bottom gaps to enable wave transmission over and under the system. The problem is formulated based on the two-dimensional multi-domain hydro-elastic linear wave-body interaction theory. The hydrodynamic interaction of oblique incident waves with the combination of the rigid and flexible bodies was solved by the distribution of the simple sources (modified Bessel function of the second kind) that satisfy the Helmholz governing equation in fluid domains. A boundary element program for three fluid domains based on a discrete membrane dynamic model and simple source distribution method is developed. Using this developed computer program, the performance of various dual systems varying buoy radiuses and drafts, membrane lengths, gaps, spacing, mooring-lines stiffness, mooring types, water depth, and wave characteristics is thoroughly examined. It is found that the fully submerged and floating dual buoy/membrane breakwaters can, if it is properly tuned to the coming waves, have good performances in reflecting the obliquely incident waves over a wide range of wave frequency and headings.