• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.34.2-34.2
• /
• 2010

We built 7 potential extra-terrestrial planets including the full 3D Earth model with various surface types and 6 planet models, each with uniform surface characteristics. The surface types include ice, tundra, forest, grass, ground and ocean. We then imported these 7 planets into integrated ray tracing(IRT) model to compute their disk averaged spectra and to understand the spectral behavior depending on the geometrical view, illumination phase and seasonal change. The IRT computation show that the 6 planets with uniform surfaces exhibit clear spectral differences from that of the Earth. We then built a phase and seasonal DAS database for the 6 uniform surface planets and used them for parametric spectral decomposition technique to derive the Earth DAS. This computation resulted in the first potential solution to the surface type ratio of the Earth compared to the measured earth surface type ratio. The computational details and the implications are discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1295-1297
• /
• 2007

In this study, we report that the characteristics of OTFTs can be improved by the UV exposure of the surface of the synthesized photo-reactive gate insulator, and be optimized by controlling the exposure time. As a gate dielectric, the modified PVP was prepared by substituting hydroxyl group in PVP with cinnamoyl group. The synthesis details and the effects of the modified PVP on the device performance are discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.343-346
• /
• 2005

This study makes the performance evaluation of water-jet chipping through analysis of ruggedness of chipping surface. The ruggedness is mapped by 3D Laser Scanner and the results are also compared with the chipping surface by mechanical chipping. And the details of in-situ works is investigated for increasing interface adhesion between existing concrete and repairing mortar. Water-jet has good operation efficiency which is up $60m^2$ per hour when the chipping depth is 7cm and also has a large ruggedness about 1.65.

• Parasites, Hosts and Diseases
• /
• 제33권3호
• /
• pp.147-154
• /
• 1995

A new haplosplanchnid cercaria, Cercaria kuwaitae VI sp. n., was found in the prosobranch snail Cerithidea cincingulata in the Kuwait Bay Details are presented on the morphology and behavior of the cercaria and the encystment process. The new cercaria is a biocellate, distome, with a prominent single sac-like intestinal cecum extending well posterior to the ventral sucker and develops in simple sporocysts. It differs from known haplosplanchnid cercariae in the absence of finger-like processes on the tail, and the presence of V-shaped excretory vesicle extending beyond ventral sucker and the presence of cervical glands. The surface topography of the cercaria and its sporocyst is examined by scanning electron microscopy. This is the first haplosplanchnid cercaria to be described from a Cerithidea species.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.17-22
• /
• 2019

The method of electrical discharge machining (EDM), one of the processing methods based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry. This present investigation details the determination of optimum process parameter to attain the better machining performance in EDM of AISI 4340 steel with graphite as a tool electrode. The experimental combinations are planned and analyzed by Taguchi's design of experiments approach. To predict the optimal condition, the experiments are conducted by using Taguchi's L27 orthogonal array. The influence of process variables such as discharge current, pulse on and pulse off time, voltage and spark speed were investigated to control the various desired performance measures such as surface roughness. Analysis of Variance (ANOVA) has to be performed to know the magnitude of each factor. Investigations indicate that the surface roughness is strongly depend on pulsed current.

• 한국컴퓨터그래픽스학회논문지
• /
• 제8권4호
• /
• pp.1-7
• /
• 2002

본 논문에서는 3차원 인체 형상 스캔 데이터로부터 팔, 다리형상을 복원하는 방법을 제시한다. 이 방법에서는 팔, 다리 스캔 데이터의 대략적인 형상을 나타내는 기반 곡면과 자세한 세부 현상을 나타내는 displacement 맵의 이중구조로 형상을 복원한다. 팔, 다리 부분의 스캔 데이터 형상은 골격을 따라 스윕하는 타원체로 근사되며, 이 타원체 스윕을 부드럽게 감싸는 envelope 곡면으로 기반 곡면을 생성한다. 타원체 스윕의 envelope 곡면은 빠른 계산을 위해 골격을 따라 추출되는 타원의 스윕 곡면으로 근사된다. 기반 곡면에 대한 스캔 데이터 점들의 displacement는 각 단면 타원으로의 매핑을 통해 스칼라 값으로 구해지며, 다단계 스플라인 함수를 이용하여 매개화된 displacement 맵을 구성한다. 이 과정에서 복원된 형상 위의 점들은 해당하는 타원체 상으로 매핑된다. 본 방법을 통하여 팔, 다리의 간결한 형상 표현을 추출할 수 있으며, 매핑된 타원체를 이용하여 형상을 빠르고 사실적으로 변형할 수 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.1-11
• /
• 2021

Performance of a NACA 63₄-021 hydrofoil in motion under and in close proximity of a free surface for a large range of angles of attack is studied. Lift and drag coefficients of the hydrofoil at different submergence depths are investigated both numerically and experimentally, for 0° ≤ AoA ≤ 30° at a Reynolds number of 10⁵. The results of the numerical study are in good agreement with the experimental results. The agreement confirms the new finding that for a submerged hydrofoil operating at high angles of attack close to a free surface, the interaction between the hydrofoil-motion induced waves on the free surface and the hydrofoil results in mitigation of the flow separation characteristics on the suction side of the foil and delay in stall, and improvement in hydrofoil performance. In comparing with a baseline case, results suggest a 55% increase in maximum lift coefficient and 90% average improvement in performance for, based on the lift-to-drag ratio, but it is also observed significant decrease of lift-to-drag ratio at lower angles of attack. Flow details obtained from combined finite volume and volume of fluid numerical methods provide insight into the underlying enhancement mechanism, involving interaction between the hydrofoil and the free surface.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.371-378
• /
• 1996

An RF inductively coupled plasma (ICP) torch has been developed as a typical thermal plasma generator and reactor. It has been applied to various materials processings such as plasma flash evaporation, thermal plasma CVD, plasma spraying, and plasma waste disposal. The RF ICP reactor has been generally operated under one atmospheric pressure. Lately the characteristics of low pressure RF ICP is attracting a great deal of attention in the field of plasma application. In our researches of RF plasma applications, low pressure RF ICP is mainly used. In many cases, the plasma generated by the ICP torch under low pressure seems to be rather capacitive, but high density ICP can be easily generated by our RF plasma torch with 3 turns coil and a suitable maching circuiit, using 13.56 MHz RF generator. Plasma surface modification (surface hardening by plasma nitriding and plasma carbo-nitriding), plasma synthesis of AIN, and plasma CVD of BN, B-C-N compound and diamond were practiced by using low pressure RF plasma, and the effects of negative and positive bias voltage impression to the substrate on surface modification and CVD were investigated in details. Only a part of the interesting results obtained is reported in this paper.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.35-35
• /
• 2010

Understanding the mechanistic details of heterogeneous catalytic reactions will provide a way to tune the selectivity between various competing reaction channels. In this regard, catalytic decomposition of alcohols over the rutile $TiO_2$(110) surface as a model oxide catalyst has been studied to understand the reaction mechanism employing the temperature-programmed desorption (TPD) technique. The $TiO_2$(110) model catalyst is found to be active toward alcohol dehydration. We find that the active sites are bridge-bonded oxygen vacancies where RO-H heterolytically dissociates and binds to the vacancy to produce alkoxy (RO-) and hydroxyl (HO-). Two protons adsorbed onto the bridge-bonded oxygen atoms (-OH) readily react with each other to form a water molecule at ~500 K and desorb from the surface. The alkoxy (RO-) undergoes decomposition at higher temperatures into the corresponding alkene. Here, the overall desorption kinetics is limited by a first-order decomposition of intermediate alkoxy (RO-) species bound to the vacancy. We show that detailed analysis on the yield and the desorption temperatures as a function of the alkyl substituents provides valuable insights into the reaction mechanism. After the catalytic role of the oxygen vacancies has been established, we employed x-ray photoelectron spectroscopy to further study the surface electronic structure related to the catalytically active defective sites. The defect-related state in valence band has been related to the chemically reduced $Ti^{3+}$ defects near the surface region and are found to be closely related to the catalytic activity of the $TiO_2$(110) surface.

• Archives of Plastic Surgery
• /
• 제51권1호
• /
• pp.2-13
• /
• 2024

Background Although osteotomy is commonly performed in rhinoplasty, it is difficult for less experienced surgeon to understand mechanism of the procedure. The primary goal of this study is to improve understanding of nasal osteotomy in Asians by considering the surface aesthetics and anatomy of the nose as well as their relationships with the surgical procedure. Methods Surface aesthetics, anatomic considerations, kinetics of medial and lateral osteotomy, fracture levels of osteotomy were discussed in detail by reviewing the previous publications and 18 years of our experience. Moreover, the technical details of osteotomy were explained and personal tips for performing successful osteotomy were described. Results Dorsal and lateral aesthetic lines, dorsal and basal widths are main characteristics related to the surface aesthetics of nose to perform the osteotomy. In addition, these features are different in Asian population due to the anatomic difference with Caucasians, which makes the procedure difficult and requires more attention to perform osteotomy. Conclusion Because osteotomy is one of the most traumatic and invasive part of the rhinoplasty, it is crucial for the rhinoplasty surgeon to understand the relationship between surface aesthetics and osteotomy techniques to produce consistent and reproducible results.