• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.3
• /
• pp.177-184
• /
• 1991

We have investigated geographical distribution and physico-chemical properties of water masses or water types at mid-bottom depth in the neighbouring sea of Cheju Island in August 1986. In 50m layer the Yellow Sea Bottom Cold Water(YSBCW) below $12^{\circ}C$ was observed in the northwestern area of Cheju Island, while the Tsushima Warm Water(TWW) with relatively high temperature$(>16^{\circ}C)$ and salinity more than 34.0 in its southeastern area extended as far as the coast of about 15km. Also, 50m layer at the outside stations of its southwestern area indicated relatively cold water temperature$(11-30^{\circ}C)$, probably due to southward transport of the Yellow Sea Bottom Cold Water(YSBCW . The Yellow Sea Warm Water(YSWW), the mixed water of the YSBCW and the TWW, ranged $13^{\circ}C$ to $16^{\circ}C$ in water temperature and was appeared mainly in the coastal and intermediate area of Cheju Island. And the relatively cold water in the southwestern area and the Tsushima Warm Water were more extensively distributed in 50m layer than the deeper layer. Horizontal distributions of nitrate and phosphate showed a pattern similar to that of water temperature. As it were, the Yellow Sea Bottom Cold Water had the highest concentration of nutrients, while southwestern outside stations had the lowest nutrient contents. Especially, the concentration of nitrate in the latter was remarkably low compared with the value at the other stations. It may be attributed to intensive vertical mixing by collision of the northward driven Tn with the southward driven YSBCW. Also, it was particular that the Tsushima Warm Water indicated relatively high silicate content corresponding to that of the Yellow Sea Bottom Cold Water. Based on the data of $\Delta Si/\Delta P$ ratio, it seems that the mid-bottom waters in this study area are younger than the surface or intermediate water in the Korean East Sea.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.173-205
• /
• 2008

Space debris have frequently caused damage to space objects like satellites in orbits and sometimes have fallen on the earth. Such increase in space debris will lead to the high possibility of threatening space activities of mankind. However, it is not so easy for the damage caused both by identified and by unidentified space debris to be recovered since in the regime of the current international law, there is no legislation of prescribing the damage done by space debris. For overcoming the limitation it seems desirable that either the Liability Convention should partly be amended or new international law regime should be established. For instance, 'space debris' should be included in the new definition of 'space object' and the range of launching should also be defined clearly by making the concept of 'launching' somewhat more specified. Moreover, the subject of international liability for damage caused by space debris should be divided into two classes: the subject before and after registration. While in case of before-registration launch states should be held liable for any damage jointly or individually, in case of after-registration 'the state of registry' or 'owner' of the space debris should be. In the event of damage being caused elsewhere than on the surface of the earth to a space object of other State, 'fault-based liability' is currently applied. But it needs to be changed into 'absolutely liability'. In this paper, 'Liability Pool', 'Insurance', 'Market-Share Liability' are presented as aid devices of the damages resulting from unidentified space debris. They should be defined through the amendment of the Liability Convention or another international treaty. Some day there comes a time when our country shall possess many of the astronomical price of satellites. It means that we can't be free from the damage by the increasing number of space debris. Provided that our satellites are damaged by such space debris, it will do the satellites damage and cause impaired functioning or troubles in operation. As a result, if we are not paid for the damage by space debris, we will be confronted with tremendous economic loss because it is necessarily connected with the excess burden of taxation. Thus, an international agreement regarding the measures of the compensation for space debris damage must be made very soon.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.470-486
• /
• 1995

Mammary epithelial cells contain a subpopulation of cells with a large proliferativ potential which are responsible for the maintenance of glandular cellularity and are the progenitor cells of mammary cancer. These clonogens give rise to multicellular clonal alveolar or ductal units(AU or DU) on transplantation and hormonal stimulation. To isolate putative mammary clonogens, enzymatically monodispersed rat mammary epithelial cells from organoid cultures and from intact glands are sorted by flow cytometry according to their affinity for FITC labeled peanut lectin(PNA) and PE labeled anti-Thy-1.1 antibody(Thy-1.1) into four subpopulations : cells negative to both PNA and Thy-1.1(B-), PNA+cells, Thy-1.1+cells, and cells positive to both reagents(B+). The in vivo transplantation assays indicate that the clonogenic fractions of PNA+cells from out-growths of organoids in primary cultures for three days in complete hormone medium(CHM) are significantly higher than those of cells from other subpopulations derived from cultrues or from intact glands. Extracellular matrix(ECM) is a complex of several proteins that regulated cell function ; its role in cell growth and differentiation and tissue-specific gene expression. It can act as a positive as well as a negative regulator of cellular differentiation depending on the cell type and the genes studied. Regulation by ECM is closely interrelated with the action of other regulators of cellular function, such as growth factors and hormones. Matrigel supports the growth and development of several different multicellular colonies from mammary organoids and from monodispersed epithelial cells in culture. Several types of colonies are observed including stellate colonies, duct-like structures, two- and three-dimensional web structures, squamous organoids, and lobulo-duct colonies. Organoids have the greatest proliferative potential and formation of multi-cellular structures. Phase contrast micrographs demonstrate extensive intracellular lipid accumulation within the web structures and some of duct-like colonies. At the immunocytochemical and electron micrograph level, casein proteins are predominantly localized near the apical surface of the cells or in the lumen of duct-like or lobulo-duct colonies. Squamous colonies are comprised of several layers of squamous epithelium surrounding keratin pearls as is typical fo squamous metaplasia(SM). All-trans retinoic acid(RA) inhibits the growth of SM. The frequency of lobulo-ductal colony formation increased with the augmentation of RA concentration in these culture conditions. The current study models could provide powerful tools not only for understanding cell growth and differentiation of epithelial cells, but also for the isolation and characterization of mammary clonogenic stem cells.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.29-36
• /
• 1995

Load testis are executed on model reticulated root piles (RRP) to figure out the optimum slanting angle in the piles installation. One set of model RRP consists of 8 slanting piles which are installed in circular patterns forming two concentric circles, each of which is made by 4 piles. Each pile which is a steel bar of 5m in diameter and 300mm in length is coated to become a pile of 6.5mm in diameter. The slanting angle of the model RRP varies from 0$^{\circ}$ to 20$^{\circ}$ Comparing ultimate bearing capacities of the model RRP of different installation angles, it is observed that the ultimate capacities of the RRP increase as the installation angle increases until 15$^{\circ}$, and the optimum slanting angle of the RRP is around 15$^{\circ}$ The ultimate bearing capacity of the 15$^{\circ}$-RRP is found to be 22% bigger than that of the vertical RRP and 120% bigger than that of the circular surface footing whose diameter is same with the circle formed by outer root piles'heads. However, it is noticed that when the slanting angle of the RRP is increased over 15$^{\circ}$, the ultimate capacity starts to be reduced. The ultimate capacity of 20$^{\circ}$-RRP is even smaller than that of the vertical RRP by as much as 5%. From the observation of the load settlement curve obtained during the RRP load tests, it is known that as the slanting angle gets bigger the load -settlement behavior becomes more ductile.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.33-66
• /
• 2014

While the numbers of overseas travelers has been increased rapidly each year, the numbers of passengers in the aircraft also has continued to be increased gradually. In the mist of these increasing numbers, such accidents as threatening an aircraft safety like riot, aircraft hijacking and terrorism have happened constantly. In these circumstances, South Korean government has prescribed "Aviation on Security Act" in accordance with the Convention on International Civil Aviation and other international agreements. This act aims to prevent illegal activities and illegal items on the aircraft to ensure the safety and security of civil aviation. However, this act is not sufficiently regulating all the illegal crimes and illegal items on the flight. For the worse, there is a lack of effective supervisory capacity. Likewise, the inherent problems of the current laws relating to the prevention of the illegal items on the aircraft are appearing on the surface continually. Above all, illegal items on the aircraft are directly connected to the issue of aviation safety and security as well as a safe utilization of the flight service. Thus, when there occurs a serious accident on board, it surely would be led to a huge economic loss not mentioning the loss of lives following the accident. Therefore safety of the flight passengers cannot be guaranteed without ensuring the safety of aircraft facilities and good supervisory mechanism of illegal items on the aircraft. Accordingly, establishing a safe operation order tends to influence economy and tourism of a country in no small measure. Therefore, it is an urgent issue to settle down a reasonable and adequate supervisory regulations regarding the prevention of the illegal items on the aircraft. Consequently, in this article, I studied on a reasonal and effective mechanism to control the prevention of the illegal items and illegal acts on the aircraft in order to ensure a safety and security of civil aircraft.

• Applied Microscopy
• /
• v.36 no.1
• /
• pp.35-45
• /
• 2006

Plants of Vitex negundo are known to develop numerous trichomes throughout their body, where certain trichome types have been believed to be one of the plausible structures for the unique scents. In the current study. structural aspects of the trichomes have been examined in leaves and stems of Vitex negundo using TEM and SEM. Trichome types as well as structural changes that occurred in certain trichomes during secretion have been mainly focused. Three type of glandular trichomes and two types of non-glandular trichomes were developed in the epidermis of young and mature Vitex negundo plants. The glandular trichomes included the peltate type (Type 1), the capitate type (Type 2), and degraded capitate type (Type 3), whereas the non-glandular warty trichomes contained the multicellular (Types 4) and unicellular type (Type 5). Type 1 and 2 consisted of head and stalk cells, but their number and size were different. One secretory cavity was formed from the four head cells in the former, but only two head cells were involved in the latter. The cytoplasmic density in the head cell was quite high and in particular, sER and Golgi bodies were well developed. At initiation of their development, the cuticle layer of the head cells separated from the outer tangential wall to form a secretory cavity. Subsequently the cavity expanded acropetally and a large number of secretory vesicles continuously produced from the head cells until they filled the entire cavity. The cavity contained materials that would be soon discharged into intercellular spaces and/or into the air. The cavity began to decrease the volume by contracting at initial secretion but degrade rapidly within short time. It has been suggested that the mode of secretion in V. negundo is probably the eccrine secretion, since no break or rupture of the cavity has been observed during examination. Contrastingly Type 3 exhibited deterioration of the head cell at early stage. Type 4 was about $110{\sim}190{\mu}m$ long, consisting of $2{\sim}3$ cells, and distributed more in the adaxial epidermis compared to the abaxial surface. However, $20{\sim}30{\mu}m$ long Type 5 was extremely dense in both epidermis. Among several trichome types, Type 1 and 2 probably play an important role in discharging unique aromatic scents in plants of V. negundo.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.4
• /
• pp.195-205
• /
• 2013

Excessive input of organic matters from fish cage farming has been considered as one of the major factors disturbing benthic ecosystem, especially in semi-enclosed coastal waters. Recently offshore aquaculture in the vicinity of Jeju-do has been introduced to minimize that kind of negative impact. This study was conducted to investigate the ecological impacts of offshore aquaculture on the macrobenthic polychaete communities. A total of ten sampling works were carried out for 28 months, spanning from 10 days after starting giving feed to 3 months after stopping giving feed. During the study period, mean current velocity was quite strong with the range of 50 cm/s to 70 cm/s. TOC of surface sediment was constantly low. Significant changes in polychaete community were detected just three months after starting giving feed, which were the increase of the number of species and density at all stations. Up to 18 months after the start of farming, the amount of feed provided played an important role in the fluctuation of the number of species and density, especially at 0 m and 10 m stations. After reducing the amount of feed provided, dominance of some opportunistic species within 10 m distance from fish cages still lasted to the end of aquaculture. However, opportunistic species disappeared 3 months after the end of farming, which indicated the sign of recovery from the disturbance. From these results, the amount of food input and the period of cultivation were critical factors disturbing polychaete community and ensuing changes in this offshore and oligotrophic waters as well. In addition, study on the changes of polychaete community structure before and after fish farming showed more detailed changes in benthic ecological state than geochemical approach did.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.107-113
• /
• 2017

To understand of the present state for temperature management of cold and frozen food transportation vehicles, we surveyed and measured the temperatures of eight transportation vehicles (including 3 small & medium and 5 large businesses) in Jeonbuk province, Korea. In the transportation vehicles of small & medium businesses, the mean temperature of cold and frozen foods was $8.35{\pm}5.72^{\circ}C$ and $-3.45{\pm}16.88^{\circ}C$; in large businesses, $3.92{\pm}1.44^{\circ}C$ and $-15.38{\pm}2.98^{\circ}C$, respectively. In the difference of temperature by the locations within transportation vehicles, the difference in each cold and frozen was $2.40{\pm}1.45^{\circ}C$ and $2.37{\pm}2.52^{\circ}C$, as a mean. But there was not statistically significant difference in locations between cold and frozen (p > 0.05). In the difference of surface temperatures on various foods before and after door opening during the loading, the temperatures of cold and frozen foods increased by $0.55^{\circ}C$ and $1.18^{\circ}C$, as means, respectively. The temperature of foods over time and placement of cold and frozen foods in transportation vehicles were not consistently maintained at optimal values in distribution. Therefore, the development of time-temperature history (TTH) system technology at the distribution level for cold and frozen foods is required.