• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3650-3655
• /
• 2013

A state purpose to produce fine blanking die gets to be the maximum size of share surface the study considered that change a size of share area. the clearance affecting most greatly size of share surface fixing as 1% of material thickness and while change share speed, A distance change from share line to V-ring center, A change of V-ring angle. it designed. Each test specimen taken from the share surface size analysis of the V-ring distance of 2mm, the outer $45^{\circ}$ / inner$30^{\circ}$ if the, Shear speed was found that the area of the entire cross section is largest the 6.4m/min.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.1
• /
• pp.21-33
• /
• 2016

Estimation of groundwater hydrologic cycle pattern is one of the most critical issues in sustainable management of groundwater resources in coastal area. This study estimated groundwater percolation by using the water balance methodology and hydrogeological characteristics of land use and soil. Evapotranspiration was computed by using the Thornthwaite method, and surface runoff was determined by using the SCS-CN technique. Groundwater storage change was obtained as 229 mm/a (17.8% of the average annual rainfall, 1286 mm/a), with 693 mm/a (60.1%) of evapotranspiration and 124 mm/a (9.6%) of surface runoff. Rainfall and groundwater storage change was highly correlated, comparing with the relationships between rainfall and evapotranspiration, and between rainfall and surface runoff. This result indicates that groundwater storage change responds more sensitively to precipitation than evapotranspiration and surface runoff.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.802-811
• /
• 1995

The purpose of this in vitro study was to compare the bleaching effect and the surface change according to three bleaching agents (Rembrandt, Natural White, Hi-Lite). Teeth were stained by artificial food colorants for 6 weeks and bleached for 4 weeks. The teeth were evaluated with spectrophotometer after bleaching on the 1st week and on the 4th week. The surface change of enamel was evaluated under SEM after exposure to 3 agents for 1 and 24 hours. The results were as follows : 1. All groups showed increased Lightness difference after bleaching. 2. After 1 week, only Rembrandt group showed significant bleaching effect compared to control group. 3. After 4 weeks, Rembrandt group and Hi-Lite group showed significant bleaching effect compared to control group. 4. SEM evaluation revealed that enamel surface underwent considerable change after 24 hours. Scratch disappeared and smooth surface was shown.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.862-867
• /
• 1997

A 5-axis NC milling technology is presented on ruled surface. Problems in 5-axis NC machining are such as tool interference,tool collision and change of tool attitude,etc. The change of tool attitude causes rotation of cutter and variation of feedrate to overcut part surface. This poor control of tool attitude is the primary problem in multi-axis NC milling. This paper observes ruled surface for control of tool attitude. Ruled surface is composed of directrix and ruling, line of constant magnitude. Directrix corresponds to points on part surface and Ruling cutting tool. Trajectory of tool movement corresponds to ruled surface.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1067-1070
• /
• 2009

We studied change in water contact angle on $TiO_2$ surfaces upon high-energy electron-beam treatment. Depending on conditions of e-beam exposures, surface OH-content could be increased or decreased. In contrast, water contact angle continuously decreased with increasing e-beam exposure and energy, i.e. change in the water contact angle cannot be rationalized in terms of the overall change in the surfacestructure of carbon-contaminated $TiO_2$. In the C 1s spectra, we found that the C-O and C=O contents gradually increased with increasing e-beam energy, suggesting that the change in the surface structure of carbon layers can be important for understanding of the wettability change. Our results imply that the degree of oxidation of carbon impurity layers on oxide surfaces should be considered, in order to fully understand the change in the oxide surface wettability.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.1
• /
• pp.33-43
• /
• 2013

Purpose : The study was designed to identify the change of body alignment according to surface during walking with backpack. Methods : Healthy twenty people(10 men & 10 women) participated in this study. The exclusion criteria were orthopedic and neurologic disease. Initial alignment measurements were performed. Results were evaluated by angle and range from earlobe to acromion, acromion to malleolus and earlobe to malleolus in the GPS system. Results : On the hard surface, the distance and angle from malleolus to earlobe increased after walking with backpack which is 20 % of weight(p<.05). In addition the distance from malleolus to acromion and the angle from earlobe to acromion increased(p<.05). On the soft surface, on the other hand, the distance and angle from malleolus to earlobe decreased after walking with backpack which is 20 % of weight(p<.05). There was no relationship between the change of the surface and the body's alignment(p>.05). Conclusion : Consequently, the body alignment was changed by backpack which is 20 % of weight, but body alignment wasn't changed by the surface. So more study need to be surveyed regard of this.

• Ocean and Polar Research
• /
• v.34 no.1
• /
• pp.73-83
• /
• 2012

Antarctica is very sensitive to climate change but the number of stations is not sufficient to accurately analyze climate change in this regoin. Model reanalysis data supplements the lack of observation and can be used as long term data to verify climate change. In this study, the 20CR (Twentieth Century Reanalysis) Project data from NCEP/NCAR and monthly mean data (temperature, solar radiation and longwave radiation) from 1871 to 2008, was used to analyze the temperature trend and change in radiation. The 20CR data was used to validate the observation data from Antarctica since 1950 and the correlation coefficients between these data were determined to be over 0.95 at all stations. The temperature increased by approximately $0.23^{\circ}C$/decade during the study period and over $0.20^{\circ}C$/decade over all of the months. This increasing trend was observed throughout the Antarctica and a slight increase was observed in the Antarctic Peninsula. In addition, solar radiation (surface) and longwave radiation (surface and top of atmosphere) trends correlated with the increase in temperature. As a result, outgoing longwave radiation at the surface is attenuated by atmospheric water vapor or clouds and radiation at the top of the atmosphere was reduced. In addition, the absorbed energy in the atmosphere increases the temperature of the atmosphere and surface, and then the heated surface emits more longwave radiation. Eventually these processes are repeated in a positive feedback loop, which results in a continuous rise in temperature.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.4
• /
• pp.111-124
• /
• 2010

To monitor the environment of land surface change is considered as an important research field since those parameters are related with land use, climate change, meteorological study, agriculture modulation, surface energy balance, and surface environment system. For the change detection, many different methods have been presented for distributing more detailed information with various tools from ground based measurement to satellite multi-spectral sensor. Recently, using high resolution satellite data is considered the most efficient way to monitor extensive land environmental system especially for higher spatial and temporal resolution. In this study, we use two different spatial resolution satellites; the one is SPOT/VEGETATION with 1 km spatial resolution to detect coarse resolution of the area change and determine objective threshold. The other is Landsat satellite having high resolution to figure out detailed land environmental change. According to their spatial resolution, they show different observation characteristics such as repeat cycle, and the global coverage. By correlating two kinds of satellites, we can detect land surface change from mid resolution to high resolution. The K-mean clustering algorithm is applied to detect changed area with two different temporal images. When using solar spectral band, there are complicate surface reflectance scattering characteristics which make surface change detection difficult. That effect would be leading serious problems when interpreting surface characteristics. For example, in spite of constant their own surface reflectance value, it could be changed according to solar, and sensor relative observation location. To reduce those affects, in this study, long-term Normalized Difference Vegetation Index (NDVI) with solar spectral channels performed for atmospheric and bi-directional correction from SPOT/VEGETATION data are utilized to offer objective threshold value for detecting land surface change, since that NDVI has less sensitivity for solar geometry than solar channel. The surface change detection based on long-term NDVI shows improved results than when only using Landsat.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.146-148
• /
• 2005

This study investigates to detect sea surface temperature (SST) and land cover change after tide embankment construction using Landsat Thematic Mapper (TM) thermal infrared (TIR) band data at Shihwa Lake and surrounding area. SST measurement is important for studies of both the structure of the ocean and as the thermal boundary between the ocean and the atmosphere. The TIR band of TM images can be used to detect SST change whose shoreline is complicated and narrow like the study site. The purpose of this study is to estimate SST and land cover change at Shihwa Lake and surrounding area.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.239-246
• /
• 2017

A compact plasmonic switching scheme, based on the phase change of a thin-film chalcogenide material ($Ge_2Sb_2Te_5$), is proposed and numerically investigated at optical-communication wavelengths. Surface plasmon polariton modal analysis is conducted for various thicknesses of dielectric and phase-change material layers, and the optimized condition is induced by finding the region of interest that shows a high extinction ratio of surface plasmon polariton modes before and after the phase transition. Full electromagnetic simulations show that multiple reflections inside the active region may conditionally increase the overall efficiency of the on/off ratio at a specific length of the active region. However, it is shown that the optimized geometrical condition, which shows generally large on/off ratio for any length of active region, can be distinguished by observing the multiple-reflection characteristic inside the active region. The proposed scheme shows an on/off switching ratio greater than 30 dB for a length of a few micrometers, which can be potentially applied to integrated active plasmonic systems.