• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.65-72
• /
• 2010

In this study, the effects of urban areas against flood waves due to a dam failure were numerically investigated based on the two laboratory experiments and the predicted water surface elevations at specific points showed good agreement with available measurements. In the first experiment, a relatively high water depth and the delay effect of flow at the front of urban areas are observed. The urban areas may become a large obstacle against smooth propagation of flood wave. In the second one, as the inflow increases, moreover, the water surface elevations can be classified into abruptly decreasing portion and slowly decreasing portion, and the first arrival time to the front of urban area is decreasing with the increasing inflow.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.65-75
• /
• 2004

This study aims to identify the degree of heat island in summer in Gwangju. For the purpose the city was classified according to use and surface components and temperature of the city for 24 hours was measured. The period of measurement was from August 11 to 13. 2003(two days). As a result of the measurement, the daily standard temperature of the central business areas and downtown areas was about $26^{\circ}C$. That of new residential areas neighboring the downtown was $25.1^{\circ}C$, and that of the outer residential areas was $23.4^{\circ}C$. In comparison with the result that temperatures of the Gwangju University playground and the Gwangju Weather Bureau were $23.1^{\circ}C$ and $23.3^{\circ}C$ respectively, the temperature of the downtown was about $2.7^{\circ}C$ Higher and that of the new residential area in downtown was about $1.8^{\circ}C$ higher. And it was demonstrated that the downtown outer road under Mt. Mudeung is a low-temperature zone. When temperature of the city was measured based on surface components, the daily standard temperature of Gwangju Stream Bok-gae area was the highest, $24.2^{\circ}C$, followed by $23.6^{\circ}C$ of the downtown stream and $22.2^{\circ}C$ of the greens (city park) and the waterside area.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.3
• /
• pp.1-8
• /
• 2009

The present study was conducted with the object of measuring sensibility image through an experiment with human bodies and indexing human feelings according to land cover types. The temperature by land cover types formed the lowest temperature in planted areas and the highest temperature in paved areas. The wind velocity is stronger in bare grounds, the surface of water and building areas than planted areas, grassland and paved areas. In the case of using a globe thermometer, a solar controled device confirmed the planted areas. In summer, an increase of thermal sensation are indicated a decrease of amenity, and the sensation which has high correlationship is in order by amenity, thermal sensation, airflow sensation and humidity sensation.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.167-178
• /
• 2018

Urban green areas or forest regions play an important role in lowering the air temperature of the surrounding areas. This cooling effect does not only affect inside of the green areas, but also extends into neighboring streets and buildings. In this study, the Land Surface Temperature (LST) are retrieved from the Landsat 8 satellite data for 8 clear days in Seoul, Korea from 2013 to 2015, and used for analyzing the cooling effect at an urban green region, Seonjeongneung, located in the southern part of Seoul. The LST distribution from the boundary of the Seonjeongneung presents that the cooling effect of the green areas was found to extend in many directions into the urban areas. The LST estimations of residential and commercial areas around the Seonjeongneung are also analyzed to assess how the green areas affect the type of land cover and the surroundings in the urban areas. Relatively lower LST for the residential areas from the Seonjeongneung boundary ranges from 100 to 250 m, resulting in an average cooling effect of $2.3^{\circ}C$. On the other hand, the LST distribution in the commercial areas shows that the effective distance of green areas are relatively low in the range of 0 to 200 m, which means the average cooling effect is approximately $0.3^{\circ}C$. This result shows that the cooling effect of the Seonjeongneung is clearly noticeable, particularly, the residential areas show greater cooling effect than commercial areas.

• Journal of the military operations research society of Korea
• /
• v.5 no.1
• /
• pp.37-72
• /
• 1979

This paper presents the FORTRAN program for expected damage by surface-to-surface weapons. One of the methods can be used to determine the effectiveness of general purpose (GP) bombs and cluster weapons against single unitary targets, linear targets, area targets, and areas of unitary target elements, The effectiveness index is in terms of fractional damage ($F_D$) or the number of volleys ($N_V$).

• International Journal of CAD/CAM
• /
• v.7 no.1
• /
• pp.21-30
• /
• 2007

The inverse offset method (IOM) is widely used for generating cutter paths from the point-based surface where the surface is characterised by a set of surface points rather than parametric polynomial surface equations. In the IOM, cutter path planning is carried out by specifying the grid sizes, called the step-forward and step-interval distances respectively in the forward and transverse cutting directions. The step-forward distance causes the chordal deviation and the step-forward distance produces the cusp. The chordal deviation and cusp are also functions of local surface slopes and curvatures. As the slopes and curvatures vary over the surface, different step-forward and step-interval distances are appropriate in different areas for obtaining the machined surface accurately and efficiently. In this paper, the chordal deviation and cusp height are calculated in consideration with the surface slopes and curvatures, and their combined effect is used to estimate the machined surface error. An adaptive grid generation algorithm is proposed, which enables the IOM to generate cutter paths adaptively using different step-forward and step-interval distances in different regions rather than constant step-forward and step-interval distances for entire surface.

• Journal of Surface Science and Engineering
• /
• v.56 no.1
• /
• pp.69-76
• /
• 2023

The effects of hairline treatment on surface blackening and thermal diffusion behaviors of Zn-Al-Mg alloy coated steel sheet were evaluated by the three-dimensional surface profiler and laser-flash technique. The metallographic observation of coating damages by hairline treatments showed that several cracks were initiated and propagated along the interface between primary Zn/eutectic phases. As the hairline processing became more severe, the crack occurrence frequency in eutectic phase of coating layer and the surface roughness increased, which had a proportional relationship with the level of blackening on the coating surface. In addition, the higher interfacial areas of the blackened coating surface, caused by the hairline process, led to an increase in thermal diffusivity and conductivity of the coated steel sheet. On the other hand, when the coating damage by hairline treatment was excessive and the steel substrate was exposed, there was little difference between the thermal diffusivity/conductivity of the untreated sample though the blackening degree was higher than that of untreated sample. This work suggests that the increase in the surface areas of the coating layer without exposure to steel substrate through hairline treatment can be one of the effective technical strategies for the development of Zn-Al-Mg alloy coated steel sheets with higher blackening level and thermal diffusivity.

• Korean Journal of Remote Sensing
• /
• v.40 no.3
• /
• pp.307-316
• /
• 2024

On January 1, 2024, an earthquake with a moment magnitude of 7.5 occurred on the Noto Peninsula in Japan. The earthquake caused significant surface displacement on the Noto Peninsula. The surface displacement is measured by global navigation satellite system (GNSS) base stations, but there are limitations in obtaining information in areas where base stations do not exist. Therefore, in this study, we aim to determine the horizontal land surface displacement across the Noto Peninsula using offset tracking, which can detect rapidly occurring displacement. As a result of analyzing the Noto Peninsula using the offset tracking technique, it was found that more horizontal surface displacement occurred in the northwest region than in the northeast region of the Noto Peninsula, where the epicenter was located, and the surface displacement value reached a maximum of 2.9 m. The results of this study can be used to calculate surface displacement values in areas where surface displacement data are not available through ground GNSS base stations.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.426-437
• /
• 2013

Objective: Gotjawal refers to a special geographical designation found in Jeju Province, Korea, where vegetation forms over a rocky area. Due to the important ecological value of Gotjawal, international concern about such areas is growing. However, only limited information is available regarding environmental contamination of Gotjawal. This study was conducted in order to investigate the levels of contamination and associated ecotoxicological effects of surface water bodies in Gotjawal. Methods: Surface water samples were collected at three sampling sites in two Gotjawal areas and were analyzed for several pharmaceuticals and pesticides in consideration of the potential sources of contamination. The ecotoxicity of the samples was measured using water fleas (Daphnia magna and Moina macrocopa) and zebrafish (Danio rerio). In addition, effects on the gene transcription of zebrafish were investigated following exposure to the samples. Results: Nine pharmaceuticals were detected in the samples, but none of the target pesticides were detected. Following acute exposure to two surface water samples, the survival of waterfleas was significantly reduced, but reproduction was not affected. In zebrafish, time-to-hatch was delayed and fry survival was decreased in some samples. On the other hand, at the transcriptional level, there were no genes significantly influenced by exposure to the samples. Conclusion: This is the first study investigating environmental contamination in Gotjawal areas and associated ecotoxicities. Further studies are warranted to identify the cause of acute Daphnia toxicity and to determine potential consequences of longer-term exposure in Gotjawal areas.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.2 s.109
• /
• pp.60-70
• /
• 2005

This study was carried out to elucidate the vertical characteristics of soil properties at six planted sites of land reclaimed from the sea, in Gwangyang Bay, Jeollanam-do Province, Korea. Based on the types of planting site, the chemical properties of the vertical soil layers varied. The vertical variation was great in the planting sites $Z_1\;and\;Z_2$, but less varied in the mounded planting sites $Z_3,\;Z_5,\;and\;Z_6$. Major reasons for the vertical variation in soil chemical properties included differences in the accumulation of organic matter, soil disturbance by heavy construction equipment, and heterogeneity of soil properties between soil horizons. As soil depths increased, soil salts varied. The electrical conductivity (ECe) increased in the lower areas of planting sites $Z_1\;and\;Z_2$, and the disturbed, saline planting site $Z_3$, but decreased in the lower areas of $Z_3,\;Z_5,\;and\;Z_6$. These tendencies did not coincided with exchange cation concentrations $(Na^+,\;K^+,\;Mg^{++},\;Ca^{++})$. Both total carbon (T-C) and total nitrogen (T-N) accumulated more in the lower areas of planting sites than in the higher areas, and levels were higher closer to the surface than in the soil depths. It is supposed that these tendencies are related to the accumulation of fallen leaves or other organic matter at the soil surface, and the soil chemicals then slowly move downward from the surface. Impediments to tree growth included soil hardiness, high soil salinity and exchangeable cation concentration, low soil moisture content, acidic or alkaline soil, low organic matter, heterogeneity of soil texture and establishment of soil stratification.