• 천문학회보
• /
• 제46권1호
• /
• pp.46.1-46.1
• /
• 2021

Hydrated asteroids get widespread attention for the evolution of water in the Solar System, especially thanks to the recent successes of the Hayabusa2 and OSIRIS-REx space missions. The target asteroids of these missions are believed to be fragments that have experienced aqueous alteration in their parent bodies [3]. Although hydrated asteroids have been studied well via spectroscopy, focusing on the 0.7 um or the 2.7 um absorption bands [2, 3, 4], polarimetric properties of these asteroids have rarely been investigated. In this study, we conducted a polarimetric observation of 18 C-complex main-belt asteroids with the 1.6-m Pirka telescope at the Nayoro Observatory of Hokkaido University, Japan. We used a polarimetric imaging mode of the Multi-Spectral Imager (MSI) with the standard Rc-band filter (the central wavelength at 0.64 um) [5]. As a result, we found that all of these hydrated asteroids indicate deep negative branches of their polarimetric profiles. Accordingly, the hydrated asteroids have the polarization minima (Pmin), whose values are significantly lower than any other taxonomic types of asteroids (including C-group asteroids). Because Pmin depends on albedo, particle size, and porosity of the surface materials [1], we suspect that hydrated asteroids are distinctive from other asteroids in terms of these physical properties. In this presentation, we introduce our polarimetric observation and findings. We discuss why hydrated asteroids indicate such low Pmin values, comparing Pmin with spectral features at 0.7 um and 2.7 um based on the observation results.

• 한국대기환경학회지
• /
• 제19권3호
• /
• pp.297-306
• /
• 2003

Works were focused on back pressure characteristics of ceramic fiber filter on DPF (Diesel Particulate Filter) system and experiments were performed to select appropriate filter which can filter particulates. Filters were installed on metal -support tube which has openings for exhaust gas flow. Ceramic fiber filters with high specific surface area and adequate high temperature strength are commercially available for filtration of diesel particulates and in -situ hot regeneration. Thus, ceramic blanket and ceramic board which are used as insulating media were applied to filter and filtration apparatus was installed on exhaust gas line connected to 2.0 L diesel engine. Alternating filter structure to adapt DPF system, collection efficiency test of diesel particulates was measured. In case of ceramic blanket, pressure drop was low, caused by the destruction of soft structures. Also, particulate collection efficiency was decreased depending on loading time. In case of ceramic board, structure design was altered to reduce back pressure on DPF system. Structure design was altered to induce Z-flow by making 10 mm and 5 mm holes on the surface of media. Alteration of 5 mm hole showed that media have low back pressure but particulate collection efficiency was 77%, while 10 mm hole showed that of 90%.

• 자원리싸이클링
• /
• 제15권3호
• /
• pp.81-86
• /
• 2006

수중에서 일어나는 흡착반응에 대해 고전적 Langmuir 등온흡착식에서 고려되고 있지 않은 흡착제 표면에서의 흡착질과 물분자간의 치환과정을 고려한 수정된 Langmuir 등온흡착식을 제시하였다. 활성탄 표면에 대한 $Cd^{2+}$의 흡착을 대상으로 도출된 수정 등온흡착식을 적용한 결과, 흡착특성의 검토 및 반응양상의 해석에 있어 고전적 Langmuir 등온흡착식에 비해 그 적용성이 향상되는 것으로 파악되었다. 이에 의거하여 Langmuir 모델을 따르는 흡착계에 있어 제시된 수정 등온흡착식을 적용할 경우, 공정의 설계 및 운영과정에서 보다 정밀하고 향상된 결과를 얻을 수 있을 것으로 사료되었다.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.37-48
• /
• 2001

Ceromers, new indirect resin system, are now being adopted for esthetic restorations. Despite of its translucency and good color matching, color stability after long-term use was unknown till now. This in vitro study was designed to evaluate color stability of some ceromers when subjected to brushing after thermocycling. Three types of ceromers: Scupture, Targis, Artglass and a direct resin system, Z100 were prepared to disks 12 mm in diameter, 2.5 mm in thickness. All specimens were polished, and Sculpture and Targis specimens were divided two groups, respectively. Then, half of them were glazed according to manufacturer's instructions. All specimen were brushed 20,000 times after 10,000 cycle thermocycling. Color was measured with spectrophotometer after 1,000, 3,000, 10,000 times thermocycling and 20,000 time brushing, respectively. Color difference (${\Delta}E$) was calculated according to CIE LAB system. During thermocycling, Sculpture & Targis system with polished surface showed greater color change than any other groups. After brushing, color difference was reduced significantly. Mean values of ${\Delta}E$ ranged 0.98 to 2.98. All Ceromers were considered clinically acceptable after thermocycling and brushing, and color change mechanism was affected by the brands and finishing methods. It might be concluded that color change of ceromer is due to surface alteration.

• 환경영향평가
• /
• 제22권4호
• /
• pp.329-343
• /
• 2013

According to previous studies, the increased air temperature can lead to change of thermal stratification structure of lakes and reservoirs. The changed thermal stratification may result in alteration of materials and energy flow. The objective of this study was to predict the effect of climate change on the water temperature and stratification structure of Daecheong Reservoir, located in Geum River basin of Korea, using a three-dimensional(3D) hydrodynamic model(ELCOM). A long-term(100 years) weather data set provided by the National Institute of Meteorological Research(NIMR) was used for forcing the 3D model. The model was applied to two different hydrological conditions, dry year(2001) and normal year(2004). It means that the effect of air temperature increase was only considered. Simulation results showed that the surface water temperature of the reservoir tend to increase in the future, and the establishment of thermal stratification can occur earlier and prolonged longer. As a result of heat flux analysis, the evaporative heat loss can increase in the future than now and before. However, the convective heat loss and net long wave radiation from water surface decreased due to increased air temperature.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.59-64
• /
• 2018

In recent years, the solar cell market has steadily grown with the demand for new energies. And wire sawing is one of the most critical processes in manufacturing solar cell wafer which is supposed to affect the breakage of wafers most during the process and afterwards. Generally, the defects of the wafers are generated from the structural vibrations of the machine. In the sawing process, the vibrations cause unnecessary normal stress on the cut surface of wafers, and eventually create the surface damage or leave the residual stress. In this study, the dynamic properties of a wire saw have been analyzed through the frequency response test and the computer simulation. And the effects of the design alterations have been investigated to stabilize the machine structure and further to reduce the vibrations. The result shows that relatively simple design alterations of supporting structure without any change of major parts of the machine can suppress the vibrations of the machine effectively.

• 한국지형학회지
• /
• 제19권1호
• /
• pp.57-68
• /
• 2012

한반도 남서부에 위치한 나주 일대에는 화강암 구릉대가 대표적인 지형경관이며, 대부분은 적색의 풍화층(토양)으로 일반화되어 있다. 나주 구릉대의 적색풍화층을 화학적 풍화지수(CIA)를 통해 분석해본 결과, CaO, $Na_2O$, $K_2O$는 일반적인 화강암 풍화층에 비해 강하게 용탈된 상태이지만, 스페인의 Guadalquivir 분지의 카오리나이트 풍화층과 비교해 볼 때, $K_2O$의 용탈이 아직은 많이 미약한 상태이다. 화학적 풍화강도와 적색화의 상관성 여부를 파악하기 위해 A-CNK-FM 도식을 통해 두 지역을 비교해 본 결과, 화학적 풍화강도가 미약한 나주 구릉대의 적색풍화층이 스페인의 카오리나이트 풍화층보다 더 높은 유색광물의 함량을 보였다. 이를 통해, 풍화층과 같은 소규모 측면에서는 실제적인 화학적 풍화강도와 적색화 사이의 직접적인 상관성을 찾을 수 없었다.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.623-640
• /
• 2015

This paper presents techniques to harvest higher voltage from piezoelectric cantilever energy harvester by structural alteration. Three different energy harvesting structures are considered namely, stepped cantilever beam, stepped cantilever beam with rectangular and trapezoidal cavity. The analytical model of three energy harvesting structures are developed using Euler-Bernoulli beam theory. The thickness, position of the rectangular cavity and the taper angle of the trapezoidal cavity is found to shift the neutral axis away from the surface of the piezoelectric element which in turn increases the generated voltage. The performance of the energy harvesters is evaluated experimentally and is compared with regular piezoelectric cantilever energy harvester. The analytical and experimental investigations reveal that, the proposed energy harvesting structures generate higher output voltage as compared to the regular piezoelectric cantilever energy harvesting structure. This work suggests that through simple structural modifications higher energy can be harvested from the widely reported piezoelectric cantilever energy harvester.

• 한국환경농학회지
• /
• 제13권3호
• /
• pp.373-385
• /
• 1994

Resistance to paraquat (1,1'-dimethyl-4,4'-bipyridilium ion) has developed in 12 species of 8 genera to which paraquat has been applied 6 to 10 times per year for 5 or more years. In recent years, tolerance to paraquat has been found in Rehmannia glutinosa (Gaertn.) Liboch. ex Fisch. & Mey. which has never been applied with any herbicides involving paraquat. In this review, we differentiate the terms, resistance and tolerance, on the basis of the paraquat-exposure history. Five hypotheses have been evaluated in several species as potential mechanisms of paraquat resistance and/or tolerance. In a species, the mode of action may be due to 1) reduced quantities of paraquat absorbed through the leaf surface, 2) detoxification of paraquat caused by the enhanced paraquat-metabolic activity, 3) rapid sequestration reducing level of paraquat at the site of action in chloroplast, 4) alteration of site of action in photosystem I resulting in interruption of electron transport to paraquat, and 5) rapid enzymatic detoxification of superoxide and other toxic forms of oxygen.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.180-183
• /
• 2007

CO in the reformed gas for proton exchange membrane fuel cell(PEMFC) has a strong tendency to adsorb on the surface of the catalyst and thus to block the sites that hydrogen needs for reactions. Even part per million levels of CO can cause serious poisoning. This CO poisoning can overcome to bleed trace amounts of air into the anode. In this study, we indicated the alteration of stack performance in various CO concentration and then bled a small amount of air. The performance of stack was reduced by increasing CO amount, and recovered by air bleeding. But the air-bleeding have an impact on performance of anode should be further explored.