• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.

• 항공우주정책ㆍ법학회지
• /
• 제24권1호
• /
• pp.3-35
• /
• 2009

항공범죄의 개념에는 민간 항공의 안전을 위해하는 행위, 항공기 불법납치 그리고 불법 파괴행위 등이 포함된다. 이러한 항공범죄는 주로 ICAO에서 국제 조약 및 협약으로 규정하고 있다. 아래의 조약과 협약은 모든 국가에 적용되는 무조건적이고 절대적인 규범이다. 항공기내에서 행한 범죄 및 기타 행위에 관한 협약(Convention on Offences and Certain other Acts Committed on Board Aircraft), 항공기의 불법납치 억제를 위한 협약(Convention for the Suppression of Unlawful Seizure of Aircraft, Convention for the suppression of unlawful acts against the safety of civil aviation), 공항에서의 불법적 폭력행위의 억제를 위한 의정서(Protocol for the Suppression of Unlawful Acts of Violence at Airports Serving International Civil Aviation), 가소성 폭약의 탐지용 표지에 관한 협약(Convention on the Marking of Plastic Explosives for the Purpose of Detection) 본 논문에서는 상기 조약에서 언급하고 있는 항공범죄의 의미와 재판관할에 대한 내용을 살펴본다. 또한 항공범죄가 비행중이거나 지상에서 발생하였을 경우의 사후구제수단에 대하여 설명한다. 마지막으로 항공범죄와 관련된 사례들을 통해 피해자를 보호할 수 있는 방안을 고찰한다.

• 한국지반공학회지:지반
• /
• 제3권3호
• /
• pp.31-48
• /
• 1987

지중에 매설된 관에는 관위의 흙무게나 지표면상재하중으로 인하여 연직견력이 작용하며, 지진이나 불등침하등으로 인하여 상향하중이 작용하는 경우도 있다. 본 연구에서는 Marston-Spangler이론을 새로운 방법으로 분석하여 관위의 흙무게로 인해 매설권에 작용하는 압력에 관하여 검토하였고, 매설연성관에 대한 재하실험을 실시하여 지표면상재하중으 로 인한 매설관의 거동특성을 연구하였다. 또 매설관의 인발저항(uplifting resistance)이론의 검토와 상향인발실험을 통하여 최대인발저항을 구하는 방법 등을 연구하였다.

• 한국표면공학회지
• /
• 제33권5호
• /
• pp.381-386
• /
• 2000

It was found that colloidal silica sprayed to the galvanized steel sheet apparently made the molten zinc layer solidified to be the randomly oriented fine grains. Its spraying effect was also little affected by steel temperature that had been considered as one of the major operating factors in this process. From the results of surface analysis, it is considered that aluminum dissolved in coating layer reduces silica to silicon by the oxidation-reduction reaction, and that the reduced silicon acts as a more effective nucleus in solidification reaction than phosphate salt, siica and alumina.

• 품질경영학회지
• /
• 제44권3호
• /
• pp.649-660
• /
• 2016

Purpose: The purpose of this study is to find empirical studies the causal relationship among positive defining representation, negative defining representation, surface acting, deep acting, dissatisfaction of job, and intention of job transfer. Methods: The collected data through the survey by customer satisfaction team of "A" company call center. Results: The result of this study is that emotion and behavior norm influence on deep act of expressing both positive impacts of the employees. Conclusion: Feelings of corporate representation norm is psychologically of employees that because it affects even also must facilitate the surface acts and internal acts of employees and job dissatisfaction at the same time due to emotional dissonance and emotional exhaustion and turnover are hidden on the back emotion norms in the contact department, it should be aware of the need to address the emotional problems. Companies need to develop a variety of programs with attention to addressing the emotional difficulties experienced by workers.

• 설비공학논문집
• /
• 제24권2호
• /
• pp.190-195
• /
• 2012

In this study, as a complementary study of the former study on indoor thermal environment in a tower type apartment house at tropical nights, a field measurement was conducted in winter season. Mainly, characteristics of heat storage and heat emission in apartment structures, in this study, were investigated. As results, indoor air temperature was changed in the range of $22.5^{\circ}C{\pm}1.0^{\circ}C$, and followed not the change of outdoor air temperature but the changed pattern of floor surface temperature. Wall surface temperature was unresponsive to the change of floor surface temperature compared with the change of indoor air temperature because wall structure was composed of concrete which has large heat capacity, and was changed in the range of $22.3^{\circ}C{\pm}0.6^{\circ}C$. Heat was stored continuously into the structures of wall and ceiling through the measurement term. and this means that a large heat capacity of the apartment structure acts as a disadvantage in winter season, too. As a total review of the study with the former study, a large heat capacity of the apartment structure acts against indoor thermal comfort in winter season as well as in summer season.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.70-77
• /
• 1999

Surface depression in the arc welding is calculated numerically to analyze its influence on pool convection and oscillation. The magnitude of surface depression due to arc pressure on the stationary GTA pool surface is relatively small, and fluctuations of the surface and velocity are caused mainly by arc pressure. The inward flow on the surface due to the electromagnetic force and positive surface tension gradient acts to decrease surface depression. Surface depression appears to have minor effects on average flow velocity and thus pool geometry. Pool oscillation occurs due to surface vibration, and oscillation frequencies are affected mainly by the surface tension and pool width. The input parameters such as arc pressure and current have negligible effects on the oscillation frequency, and the surface tension gradient has limited effects. Since the oscillation frequency varies slightly according to penetration, pool oscillation for the partial penetration weld pool is applicable to monitor the pool width.

• 공업화학
• /
• 제9권2호
• /
• pp.200-206
• /
• 1998

수면전개법에 의해 제조된 박막의 두께에 대한 고분자용액의 표면장력과 점도의 영향을 검토하였다. 수면에서 고분자용액의 전개는 고분자용액의 표면장력과 점도에 의해 지배되며, 수면전개 박막의 두께도 이들 인자의 영향을 받는다. 고분자의 농도가 증가함에 따라 고분자용액의 표면장력과 점도는 증가하였으며, 표면장력의 크기는 PVC>PS>CA이었고, 점도의 크기는 CA>PS>PVC 였다. 고분자용액의 수면전개시 물과 고분자용액의 표면장력의 차는 전개구동력으로 작용하나 고분자용액의 표면장력과 점도는 전개저항으로 작용하였다. 수면전개 박막의 두께에 대한 고분자용액의 점도영향이 표면장력에 의한 영향 보다도 더 컸으며, 수면 전개 박막의 두께는 PS>CA>PVC 순으로 두꺼웠다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.22-26
• /
• 1987

Texture provides an important acurce of information about the threedicensfornarry information of visible surface particulary for stationary conccular views. To recover three dicmensinoary information, the distorging effects of pro jection must be distinguished from properties of the texture on which the distrortion acts. In this paper, we show an approximated maximum likelihood estimation method by which we find surface oriemtation of the visible surface in gaussian sphere using local analysis of the texture, In addition assuming that an orthographic projection and a circle is an image formation system and a texel(texture element)respectively we derive the surface orientation from the distribution of variation by means of orthographic pro jemction of a tangent directon which exstis regulary in the are length of a circle we present the orientation parameters of textured surface with saint and tilt and also the surface normal of the resvlted surface orimentation as needle map. This algorithm was applied to geograghic contour and synthetic textures.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.180-185
• /
• 2019

The demands to improve the performance of the vanadium redox flow battery have attracted an intense research on modifying the carbon-based electrode. In this study, the surface of graphite felt was reformed, using cobalt oxide. The cobalt oxide was implanted into graphite felt during hydrothermal and two step heat treatments. The cobalt was deposited by hydrothermal method and the two step heat treatments made lots of holes on the graphite felt surface which is called as porous surface. The porous surface acts as an electrochemically active site for the cathodic reaction of vanadium redox flow battery. The reformed electrode shows the electrochemically improved performance compared with the pristine electrode.