• Journal of Electrochemical Science and Technology
• /
• v.14 no.1
• /
• pp.59-65
• /
• 2023

Sodium hydroxide solutions are often employed as sterilization agents in the pharmaceutical industry. Here, the chloride content is considered as a critical impurity. In this study, an electrochemical method was developed to remove chloride ions (Cl^-) through the oxidative deposition of AgCl on a Ag anode. The Cl^- content in the commercially available 50% w/w NaOH solution employed was approximately 100 mg Cl^-/kg NaOH. As the OH^- content is approximately 18,000 times higher than the Cl^- content, the formation of AgCl may be expected to be thermodynamically less favorable than the formation of Ag₂O. However, activation energies for AgCl and Ag₂O formation have been reported to be approximately 3.8 and 31.2 kJ/mol, respectively, and indicate that AgCl formation is favored. AgCl can be selectively produced by controlling the anode potential. Here, the Cl^- concentration was reduced to less than 50 mg Cl^-/kg NaOH when an anode potential of 0.18 or 0.19 V vs. Hg/HgO (reference electrode) was applied for one hour at 50℃. XRD analysis and visual monitoring of the Ag anode confirmed the oxidative deposition of AgCl on the anode surface as well as the electrochemical desalination of the concentrated NaOH solution.

• Physical Therapy Korea
• /
• v.30 no.1
• /
• pp.23-31
• /
• 2023

Background: Several factors contribute to shoulder pain, including abnormal neck posture, repeated use of the upper limbs, work involving raising the upper limbs above the head, and the effects of vibration. However, previous study has reported that constant vibration exposure could impact improvement of the stability on joints related with muscle recruitment and activation. For this difference reason, we need to verify for the complex study of relationship with repetitive upper limb movements, poor head posture, and constant vibration exposure. Objects: Our study was made to investigate the influence of vibration exposure on the shoulder muscle activity during forward-head and over-head tasks with isometric shoulder flexion. Methods: In a total of 22 healthy subjects, surface electromyography (EMG) data were collected from shoulder muscles (upper/lower trapezius, serratus anterior, and lumbar erector spinae) on tasks (neutral-head task [NHT], forward-head task [FHT], and over-head task [OHT]) with and without vibration exposure. Results: In all tasks, the EMG data of the upper trapezius and serratus anterior significantly increased with vibration exposure (p < 0.05). Furthermore, the EMG data of the lumbar erector spinae significantly increased with vibration exposure in the NHT and FHT (p < 0.05). Conclusion: We suggest that continuous vibration exposure during the use of hand-held tools in the tasks could be associated with harmful effects in the workplace. Lastly, we clinically need to examine the guidelines regarding the optimal posture and vibration exposure.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2023

Purpose: The aim of this study is to provide basic information to create an efficient training program to improve shoulder stability and function in patients with injuries and in patients having undergone surgery of the supraspinatus and infraspinatus muscles, which have a relatively high incidence of injury in shoulder joint disease. Further, independent activities of the supraspinatus and infraspinatus muscles were investigated according to forearm rotation and the neutral and lateral rotation postures. Methods: The activities of the supraspinatus and infraspinatus muscles were measured using surface electromyography in 22 healthy adults in Busan, and isokinetic muscle strength measurement equipment was used to measure muscle strength during shoulder lateral rotation. The subjects performed lateral rotation of the shoulder in three different forearm postures (neutral, supine, prone) to measure shoulder muscle activity and lateral rotation strength. Results: The independent activity ratio (% Isolation) of the supraspinatus and infraspinatus muscles during lateral rotation of the shoulder joint demonstrated a significant difference (p<0.05) according to the change in forearm posture. Conclusion: The supraspinatus muscle showed independent activity ranging from highest to lowest in the order of pronation, neutral, and supination of the forearm, while the independent activity of the infraspinatus muscle ranged from highest to lowest in the order of neutral, supination, and pronation of the forearm. Therefore, the most active forearm positions for the supraspinatus and infraspinatus muscles are pronation and neutral, respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.4
• /
• pp.28-43
• /
• 2022

To minimize such loss due to aging, research on energetic materials is being actively conducted though, there are difficulties in identifying the comprehensive aging mechanisms as they focused on the respective materials. In this study, thermal and surface analysis were performed on energetic materials composed of metals(W, Ti, and Zr) and KClO₄ oxidizer to solve the blind spots of this aging study. It was newly found that the metals in the hygrothermally aged compounds can cause significant changes in performance. For example, the growth in the thickness of the oxide film on the metals led to an increase in the average value of activation energy(E_α). In addition, the standard deviation of E_α tends to dependent on the type of metal, which is due to the difference in electronegativity.

• Journal of Veterinary Science
• /
• v.24 no.5
• /
• pp.72.1-72.16
• /
• 2023

Background: Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) on the surface of Streptococcus dysgalactiae, coded with gapC, is a glycolytic enzyme that was reported to be a moonlighting protein and virulence factor. Objective: This study assessed GAPDH as a potential immunization candidate protein to prevent streptococcus infections. Methods: Mice were vaccinated subcutaneously with recombinant GAPDH and challenged with S. dysgalactiae in vivo. They were then evaluated using histological methods. rGAPDH of mouse bone marrow-derived dendritic cells (BMDCs) was evaluated using immunoblotting, reverse transcription quantitative polymerase chain reaction, and enzyme-linked immunosorbent assay methods. Results: Vaccination with rGAPDH improved the survival rates and decreased the bacterial burdens in the mammary glands compared to the control group. The mechanism by which rGAPDH vaccination protects against S. dysgalactiae was investigated. In vitro experiments showed that rGAPDH boosted the generation of interleukin-10 and tumor necrosis factor-α. Treatment of BMDCs with TAK-242, a toll-like receptor 4 inhibitor, or C29, a toll-like receptor 2 inhibitor, reduced cytokines substantially, suggesting that rGAPDH may be a potential ligand for both TLR2 and TLR4. Subsequent investigations showed that rGAPDH may activate the phosphorylation of MAPKs and nuclear factor-κB. Conclusions: GAPDH is a promising immunization candidate protein for targeting virulence and enhancing immune-mediated protection. Further investigations are warranted to understand the mechanisms underlying the activation of BMDCs by rGAPDH in a TLR2- and TLR4-dependent manner and the regulation of inflammatory cytokines contributing to mastitis pathogenesis.

• Journal of Powder Materials
• /
• v.31 no.2
• /
• pp.132-136
• /
• 2024

This study investigated the effects of revolution speed and ball size in planetary milling on the microstructure and dehydrogenation behavior of TiH₂ powder. The particle size analysis showed that the large particles present in the raw powder were effectively refined as the revolution speed increased, and when milled at 500 rpm, the median particle size was 1.47 ㎛. Milling with a mixture of balls of two or three sizes was more effective in refining the raw powder than milling with balls of a single size. A mixture of 3 mm and 5 mm diameter balls was the optimal condition for particle refinement, and the measured median particle size was 0.71 ㎛. The dependence of particle size on revolution speed and ball size was explained by changes in input energy and the number of contact points of the balls. In the milled powder, the endothermic peak measured using differential thermal analysis was observed at a relatively low temperature. This finding was interpreted as the activation of a dehydrogenation reaction, mainly due to the increase in the specific surface area and the concentration of lattice defects.

• Journal of radiological science and technology
• /
• v.47 no.3
• /
• pp.183-195
• /
• 2024

Additional functional upgrades to the large-area compton camera (LACC) measurement device that can provide characteristics evaluation information (nuclear species and radioactivity) and two-dimensional or three-dimensional distribution imaging information of radioactive materials existing in surface or internal of concrete structures are required in terms of work stability and efficiency in order to apply to actual decommissioning sites such as nuclear power plants or medical cyclotron facilities by using this measurement device. To this purpose, the technology that allows radiation workers to intuitively and visually check the distribution of radioactive materials in advance by matching the two-dimensional distribution imaging information of radioactive materials obtained through the LACC measurement device and visual imaging of the measurement zone (10 m × 5 m) was developed. In addition, the separate system that can automatically adjust the position (height) in units of the measurement area size (0.7 m × 0.3 m × 0.8 m) of the LACC measurement device was developed and the integrated management system for characteristics evaluation information and two-dimensional or three-dimensional distribution imaging information obtained per unit of measurement for radioactive materials was developed. These functional upgrades related to LACC measurement device can improve work efficiency and safety when measuring radioactivity of concrete structures and enable the establishment of appropriate decommissioning strategies using radioactivity measurement information for decommissioning nuclear power plants or medical cyclotron facilities.

• Journal of Korean Physical Therapy Science
• /
• v.31 no.2
• /
• pp.30-40
• /
• 2024

Background: The purpose of this study is to identify the difference in muscle activity and muscle contraction onset time according to a LLD and object weight When subjects performed a lifting task. Design: Repeated measure design Methods: 15 male adults participated in this study. When subjects performed a lifting task, we measured a difference of muscle activity and muscle contraction onset time in the rectus abdominis(RA), the erector spinae(ES), and the rectus femoris(RF) between both legs using the surface electromyogram (Telemyo DTS, Noraxon Inc., USA). When subjects performed a lifting task, the weight of the object was set to 0% kg, 10% kg, and 20% kg of the subject's body weight, excluding the weight of the box. Results: The difference in muscle activity in the RA, the ES, and the RF between both legs when lifting an object was larger in LLD condition than in non-LLD condition(p<0.05). In all of muscles, the difference of contraction onset time was generally increased as the object's weight increased. Specially, the difference in muscle contraction onset time in the RA, the ES between both legs was larger in the LLD condition than in the non-LLD condition(p<0.05). Conclusion: This study suggests that LLD affects the muscle activity and muscle contraction onset time during lifting objects. It can be used as data to prevent joint damage and muscle due to the LLD during work and movements of daily living.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.129-136
• /
• 2011

Recently studies on functional concrete with a photocatalytic material such as $TiO_2$ have actively been carried out in order to remove air pollutants. The absorbtion of $TiO_2$ from those studies is applied by it being directly mixed into concrete or by suspension coated on the surface. When it comes to the effectiveness, the former process is less than that of the latter compared with the $TiO_2$ use. As a result, the direct coating of $TiO_2$ on materials' surface is more used for effectiveness. The Surface spread of it needs to have a more than $400^{\circ}C$ heat treat done to stimulate the activation and adhesion of photocatalysis. Heat treat consequently leads hydration products in concrete to be dehydrated and shrunk and is the cause of cracking. The study produces $TiO_2$ used Sol-gel method which enables it to be coated with a low temperature treat, applies it to pearlite using Lightweight Aggregate Concrete fixed with a low temperature treat and evaluates the spread performance of it. In addition to this, the size of pearlite is divided into two types: One is 2.5 mm to 5.0 mm and the other is more than 5.0 mm for the benefit of finding out the removal characteristics of $CH_3CHO$ whether they are affected by pearlite size, mixing method and ratio with $TiO_2$ and elapsed time. The result of this experiment shows that although $TiO_2$ produced by Sol-gel method is treated with 120 temperature, it maintains a high spread rate on the XRF(X ray Florescence) quantitative analysis which ranks $TiO_2$ 38 percent, $SiO_2$ 29 percent and CaO 18 percent. In the size of perlite from 2.5 mm to 5.0 mm, the removal characteristic of $CH_3CHO$ from a low temperature heated Lightweight concrete appears 20 percent higher when $TiO_2$ with Sol-gel method is spreaded on the 7 percent of surface. In other words, the removal rate is 94 percent compared with the 72 percent where $TiO_2$ is mixed in 10 percent surface. In more than 5.0 mm sized perlite, the removal rate of $CH_3CHO$, when $TiO_2$ is mixed with 10 percent, is 69 percent, which is similar with that of the previous case. It suggests that the size of pearlite has little effects on the removal rate of $CH_3CHO$. In terms of Elapsed time, the removal characteristic seems apparent at the early stage, where the average removal rate for the first 10 hours takes up 84 percent compared with that of 20 hours.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.361-371
• /
• 2017

Purpose: We aimed to investigate the gene expression of human gingival fibroblasts on microgroove surface using DNA microarray. Materials and methods: Microgrooves were applied on grade II titanium discs to have 0/$0{\mu}m$ (NE0, control group), 60/$10{\mu}m$ (E60/10, experimental group) of respective width/depth by photolithography. The entire surface of the microgrooved Ti substrata was further acid etched and used as the two experimental groups in this study. Human gingival fibroblasts were cultured in the experimental group and the control group, and total RNA was extracted. The oligonucleotide microarray was performed to confirm the changes of various gene expression levels between experimental group and control group. Changes of gene expression level were determined at the pathway level by mapping the expression results of DNA chips, using the KEGG (Kyoto Encyclopedia of Genes and Genomes) pathway analysis. Results: Gene expression levels on E60/10 and NE0 were analyzed, there were 123 genes showing significant differences in expression more than 1.5 times on E60/10 microgrooved surface compared to NE0 surface, and 19 genes showing significant differences in expression more than 2 times. The KEGG pathway analysis confirmed the changes in gene expression levels under experimental conditions. Cell signaling, proliferation, and activity among the various gene expression results were identified. Conclusion: Microgrooved surfaces induce gene expression changes and related cell signaling. According to the results of this study, microgrooves can be used as the surface of various biomaterials which need to improve cell activity through gene expression changes and activation of cell signaling.