• 한국진공학회지
• /
• 제4권S2호
• /
• pp.156-162
• /
• 1995

For a stimulating neural electrode, the charge density should be as large as possible to provide adequate stimulation of the nervous system while allowing for miniaturization of the electrode. Since iridium oxide is able to produce high charge densities while preventing undesirable reactions due to charge storage, it has become a promising material for neural prostheses. Successful production of stable Ir and Ir oxide films on various substrates now limits the use of this material. Ir was deposited on two differently prepared surface of (mirror finish, passivation) surgical Ti-6AI-4V with several methods. Ion beam mixing of sputter deposited Ir films on passivated Ti-6AI-4V produced stable and good adherent Ir films. It was found that the increase in charge density of pure Ir on continuous cyclingis due to the accumulation of the oxide phase ( associated with a large surface area) in which the valence state of iridium changes and the double-layer capacitance increases. This study also showed that the double layer capacitance is equally or even more responsible for the high charge density of anodically formed Ir oxide.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.89-95
• /
• 2001

The fretting wear characteristics of Zircaloy-4 tube at room and high temperature were Investigated experimentally. In this study, the number of cycles, slip amplitude and temperature were selected as main factors of fretting wear. The results of this research showed that the wear volume Increased with the Increase of slip amplitudes and the number of cycles but decreased with temperature and the coefficient of friction were observed different tendency between room and high temperature. According to SEM(EDS) only gross slip were observed on the surface of both specimens and compacted oxide were on worn surfaces. XRO patterns showed that the crystallization of ZrO$_2$ were observed on the worn surface at high temperature. The fretting wear were Investigated due to oxidation and accumulation of plastic flow.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.189.2-189.2
• /
• 2010

The purpose of this study is fatigue damage assessment for large sized casting parts (hub and mainframe) of the 3MW offshore wind turbine by computer simulation. Hub and mainframe durability assessment is necessary because wind turbine have to guarantee for 20 years. Fatigue life evaluation must be considered all of fatigue load conditions as the components are wind load transmission path. Palmgren-Miner linear damage accumulation hypothesis is applied for fatigue life estimation with stress-life approach. S-N curve for the spheroid graphite cast iron EN-GJS-400-18-LT is derived according to durability guidelines. Reduction factors were applied for survival probability, surface roughness, material quality and partial safety factor according to Germanischer Lloyd rules. To calculate fatigue damage, stress tensors, extracted from the unity load calculation from ANSYS is multiplied with time track of fatigue loads extracted from GH bladed. Damage accumulation is performed with all of fatigue load conditions at each finite element nodes. In this study maximum nodal damage value is under 1.0. casted parts are safe. This research was financially supported by the Ministry of Knowledge Economy(MKE), Korea Institute for Advancement of Technology(KIAT) and Honam Leading Industry Office through the Leading Industry Development for Economic Region.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.896-906
• /
• 2020

Wood deterioration experiments were carried out for 6 months in an intertidal zone of South Korea to monitor the changes in the chemical properties of two types of species, Korean red pine and sawtooth oak. The results of FT-IR spectra and XRD patterns have shown that the chemical properties of the wood did not change significantly during the 6-month burial period. However, the brightness of the surface decreased after burial; the value of the sawtooth oak sample was lower than that of the Korean red pine sample owing to an accumulation of inorganic compounds in cell lumen as observed by ICP analysis. Among the inorganic compounds, sodium and sulfur concentrations increased significantly over the burial period compared with the control. Further, the maximum moisture content decreased from 199% to 136% in the Korean red pine and 62% to 60% for the sawtooth oak. Nevertheless, the major chemical composition of both the wood species did not change significantly during the 6-month burial period, whereas, the crystallinity decreased with an increasing burial period owing to an accumulation of inorganic compounds in the lumen.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2089-2098
• /
• 2015

With the continuous development in insulation of electrical equipment design, the reliability of the system has been enhanced. However, in the manufacturing process and during operation under continues stresses introduce local defects, such as voids between interfaces that can responsible to occurrence of partial discharge (PD), electric field distortion and accumulation of charges. These defects may lead to localize corrosion and material degradation of insulation system, and a serious threat to the equipment. A model of three layers of PI film with air gap is presented to understand the influence of interface and voids on exploitation conditions such as strong electrical field, PD activity and charge movement. The analytical analysis, and experimental results are good agreement and show that the lose contact between interfaces accumulate more residual charges and in consequences increase the electric field intensity and accelerates internal discharges. These residual charges are trapped charges, injected by the electrodes has often same polarity, so the electric field in cavities increases significantly and thus partial discharge inception voltage (PDIV) decreases. Contrary, number of PD discharge quantity increases due to interface. Interfacial polarization effect has opposite impact on electric field and PDIV as compare to void.

• Ocean and Polar Research
• /
• 제24권4호
• /
• pp.331-343
• /
• 2002

The southern tidal flat of Kanghwa Island with an area of approximately $90km^2$ is one of the biggest flats on the west coast of Korea. Surface sediments for sedimentary analyses were sampled at 83 stations in August 1997, September 1999 and August 2000. The very poorly-sorted mud sediments were predominant in the eastern part of the tidal flat, whereas the poorly-sorted sand-mud mixed sediments were dominant in the western part. The area of muddy sediment distribution diminished, but that of sandy mud sediment extended to southeastward tidal flat for three years. In the western part of tidal flat, deposition occurred during the period of spring to summer, whereas erosion occurred in winter. Sediment accumulation rates during three years indicated that the sediments deposited continuously in the eastern part of tidal flat, whereas eroded in the western part of tidal flat. Recently, construction of artificial structures such as new airport, island-connecting bridges and dikes near the tidal flat might change tidal current and river flow pattern. In order to reduce the ecological damage and to preserve tidal-flat environment, it is necessary to Investigate long-term impacts on sedimentary environment and ecology.

• 한국환경과학회지
• /
• 제12권8호
• /
• pp.881-889
• /
• 2003

Spatial and vertical variations of butyltins(BTs) were investigated in polluted sediments from Jinhae, Busan, Ulsan and Yeongil Bays located in the southeastern part of Korea. Tributyltin(TBT) as a dominant species was detected in 18 of the 20 surficial sediments, and TBT levels were lower that for those in heavily polluted areas worldwide, ranging from 12 to 766 ng Sn/g dry wt. Distribution of TBT levels among bays was not significantly different (p=0.286, ANOVA). The horizontal distributions observed at 20 sites suggests that TBT concentrations are still high in polluted sites around harbors and industrial complexes. The sedimentary records a peak in the early 1990s in Jinhae Bay, in the mid 1980s in Ulsan Bay and in the late 1970s in Yeongil Bay except for Busan Bay which had a homogenous profile. In paricular, TBT at the surface sediments of four core samples still had high levels. From the horizontal and vertical results, it could be assumed that TBT inputs in the sediments were not reduced significantly compared to past levels. The annual accumulation rates estimated using the sedimentation rates and the concentration of surficial sediments exhibited that the accumulation rate of Ulsan Bay was greater than the rates for Jinhae and Yeongil Bays.

• 한국산학기술학회논문지
• /
• 제5권1호
• /
• pp.13-15
• /
• 2004

고속처리를 위한 나노급의 논리소자의 개발을 위해서는 소스/드레인 영역의 저항을 감소시키는 것이 필수적이다. 반도체소자의 개발 로드맵을 제시하고 있는 ITRS의 보고에 의하면 70㎚급 MOSFET에서는 채널영역의 저항에 대비하여 그 외의 영역이 나타내는 저항성분이 약 15% 이내로 제작되어야 할 것으로 예측하고 있다. 이 기준을 유지하기 위해서는 소스/드레인 영역의 각 전류 흐름에 기인하는 가상적 기생저항에 대한 성분 분리와 이들이 가지는 저항값에 대한 정량적 계산이 이루어져야 한다. 이에 본 논문은 calibration된 TCAD simulation을 통해 나노영역의 Tr.에서 저항성분을 계산, 평가하는 방법을 연구하였다. 특히, 소스/드레인 영역의 실리사이드 접촉 저항성분들을 최소화하여 optimize하기 위한 전략을 제시한다.

• 자원환경지질
• /
• 제33권4호
• /
• pp.261-271
• /
• 2000

In order to evaluate the environmental impact of U anormaly in the drainage system around the Shinbo talc mine area, U contents, their distribution patterns, bioaccumulation and a-radioactivity in stream water, stream sediments and aquatic organisms were investigated. The U contents of stream water attenuated with increasing distance from the mine area. The same attenuation pattern is shown in stream sediments from mine to 0.75 km downstream, although these contain highly enriched U contents (24~83 mg/kg) comparing with the international average concentration of surface soils (0.79~11 mg/kg). However, U content increases abruptly in sediment at 1.5 km downstream, probably due to detrital migration and rediposition of U enriched sediments. Futhermore, enriched U in downstream sediments occur in high proportions of carbonate and Fe-Mn oxide bounded forms, which show high potential of a secondary pollution source. For aquatic organisms, bio accumulation degree of U are in the order: aquatic larvae>black snail>mountain frog>crawfish. Cultured trout by the U enrich groundwater (387 ${\mu}g$/l) shows U accumulation in the part of branchia (CRs 5.25) and bones (CRs 11.2) but not in flesh (CRs 0.03). Total a-radioactivity have been measured in the level as 0.47 nCi/l for groundwater, 2.94~18 nCi/kg${\cdot}$DW for organisms and 93~328 nCi/kg${\cdot}$DW for sediments.

• Journal of Plant Biology
• /
• 제22권1_2호
• /
• pp.21-27
• /
• 1979

Sandy loam plots of pH 5.5, which was created by the reclamation of highlands in Yongin county, Kyeonggi province, was selected for the present experimental study. Sugar beet was cultured in these plots by treating them with calcium hydroxide and 3 replications to maintain pH 5.5, 6.4, 6.8, 7.2, and 7.6, respectively. The growth and yield of sugar beet were investigated and the results obtained showed a great deal of boron deficiency. The growth in its early stage was favorable in high pH plots, while no significant difference was observed in sugar content, root weight and sugar production at the time of harvest in each treated plot. The tendency of sugar accumulation appeared to be identical in terms of pattern in each treated plot; i.e. sugar was accumulated until early September but declined momentarily from the middle of September and then the sugar accumulation was resumed from the middle of October. The number of individuals in boron deficiency was larger in high pH plots and the condition of such boron deficiency was also severe. The result of analysis of boron contained in plant body revealed that the boron content of individuals caused boron deficiency by water culture and that occurred in the plots was small alike. The appearance of boron deficiency is characterized by the emergence of black stripes on the surface of the basal part of petiole, severe necrosis of young leaves in the area of growing point and severe wrinkles. Therefore it is felt necessary to pay particular attention to boron deficiency in the culture of sugar beet in our country.