• KSTLE International Journal
• /
• v.1 no.1
• /
• pp.48-51
• /
• 2000

Surface damage accumulation of alumina ceramics under the cyclic stress state was analyzed. The alternating stress state in repeat pass sliding contact was simulated by a synchronized biaxial (normal and tangential) repeated indentation technique. Wear debris formation mechanism through damage accumulation and fatigue grain failure in both alumina ceramic balls and flat disks was confirmed, and the contact induced surface degradation due to fatigue cracking accumulation was quantified by measuring vertical contact displacement. Variation of structural compliance (slope of load-displacement curve) of two contacting bodies was expressed as a variation of the apparent elastic property, called pseudo-elastic constant, of the contact system.

• The Korean Journal of Ecology
• /
• v.2 no.1
• /
• pp.31-37
• /
• 1978

The salt accumulation on the soil surface can be mathematically described. Although the movement of salts in soil solution is expressed in terms of mathematical model, which has certain limitations in practical application, except the exchangeable and absorbable state salts in soil solution. This model is illustrated by analyticl experiments in which evaporation from the bare soils, transpiration of plants and rainfall are required. Agreement between the model and the measured data was satisfactory, which validating the salt accumulation theory on the soil surface.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.824-828
• /
• 2011

Transmission line analysis of the surface a cumulation layer in injection-enhanced gate transistor (IEGT) is presented for the first time, based on per-unit-length resistance and conductance of the surface layer beneath the gate of IEGT. Lateral electric field on the accumulation layer surface, as well as the electron current injected into the accumulation layer, is governed by the well-known wave equation, and decreases as an exponential function of the lateral distance from the cathode. Unit-length resistance and conductance of the layer are expressed in terms of the device parameters and the applied gate voltage. Results obtained from the experiments are consistent with the numerical simulations.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.35-43
• /
• 2004

Reduction of fresh water consumption and effluent discharge provide diverse advantages in raw materials and energy savings. Papermaking system closure, however, reduces the efficiency of additives, decreases retention and dewatering, and causes many other Problems in papermaking. Accumulation of inorganic and organic substances in the process white water is the prime cause of these problems. Understanding of the accumulation phenomena of the detrimental substances in the papermaking process is of great importance for papermaking system closure. In this study a process simulation method was employed to analyze the accumulation phenomena of anionic starch in the process white water as the reuse rate of dry broke and pick up of surface sizing agent is increased. Steady state simulation studies were carried out based on the model developed in previous study. The variation of dissolved starch concentration in each process unit was monitored as a function of reuse rate of dry broke and surface sizing agent pick up rate. The result showed that dissolved starch concentration Increased as reuse rate of dry broke and surface sizing agent pick up rate was increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.1-5
• /
• 2003

This paper presented the effects of accumulation of surface charges on hydrophobicity level and the surface states of silicone polymer used for outdoor insulator treated by ultraviolet irradiation and corona discharge through measuring surface voltage decay of a corona-charged specimen were investigated. The surface resistivity by the method of the surface potential decay was compared with the value by the three electrodes methods. From this study, it was found that the accumulation of surface charges above a critical surface voltage on silicone insulating materials could lead to the temporary loss of surface hydrophobicity. In addtion, uv stress lead to a longer decay time of surface charges. We could conclude that the effects of surface charges on hydrophocity level and the changes of surface state by various artificial treatments were understood through a trend of surface potential decay.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.11
• /
• pp.483-489
• /
• 2005

This study performs a simulation for an accumulation mechanism of contaminants, which were produced in an industrial belt of inland, on the surface of insulators. From the simulation, silicon insulators presented higher accumulation than that of EPDM(Ethylene Propylene Diene Terpolymer : EPDM) insulators on the same distance in the case of the Virgin polymer insulator, and this result presented the same result in the insulator applied in actual fields. In the case of the accumulation test for the Virgin insulator and insulators used in actual fields, it is evident that the Virgin insulator presented more accumulation than that of the insulator used in actual fields. The results can be caused by the generation of LMW (Low Molecular Weight) on the external material of polymer insulators, and the level of the accumulation can be changed according to the degree of the continuous generation of LMW. In order to simulate a certain pollution of an industrial belt, which is located along the coastline, leakage currents were measured by applying the contaminant compulsively that was produced with salts and Kaolin according to the ratio of its weight on the surface of insulators. The more increase in the content of Kaolin pollution, the level of leakage currents on the surface of polymer insulator more increased. In addition, the approaching time to the maximum value of leakage currents presented a nearly constant level regardless of the content of Kaolin. The level of leakage currents significantly decreased according to the passage of time, and the level of leakage currents on the surface maintained a constant level at a specific time regardless of the content of Kaolin.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.678-686
• /
• 2002

This paper presents the effects of accumulation of surface charges on hydrophobic level and the changes of surface potential decay with various artificial environment treatments on high temperature vulcanized (HTV) silicone rubber used for outdoor insulating material. For this study, the charging apparatus by corona discharge, in which grid electrode was installed between the main corona and ground electrode, was used. From this study, it was found that the accumulation of surface charges above a critical surface potential on silicone insulating materials could lead to the temporary loss of surface hydrophobicity. In addition, corona stress and water absorption stress increase the decay rate of surface charges of HTV silicone rubber, while ultraviolet (UV) stress causes longer decay time. We could conclude that the effects of surface charges on hydrophobicity level and the changes of surface state by various artificial treatments were found through a trend of surface potential decay.

• Journal of the korean society of oceanography
• /
• v.34 no.3
• /
• pp.144-150
• /
• 1999

Slope sedimentation on the modern west Florida continental margin is controlled by pelagic carbonate accumulation and off-shelf sedimentation of neritic carbonates and terrigenous fines. Production and deposition of pelagic carbonates by planktonic foraminifera and coccoliths have played a significant role in the total slope sedimentation and are mainly promoted by sea-surface productivity. Organic carbon data reflect the relatively high biological productivity in surface waters, indicating high accumulation of biogenic calcareous sediments. The surface-water productivity in the study area is supported by the relation among microfossil assemblages, carbonate mineralogy and sedimentary organic carbon.

• The Korean Journal of Quaternary Research
• /
• v.34 no.1
• /
• pp.15-30
• /
• 2024

Typhoon effects on macrotide open-coast intertidal sediments were investigated in the Gochang Gwangseungri sandy intertidal flat on the Korean western coast. Variations in the surface sediment texture, accumulation, and sedimentary facies were observed before and after the Typhoon Kompasu in 2010. The typhoon Kompasu landed on the southwestern coast of the Korean Peninsula and passed inland between September 1st and 2nd, 2010, respectively. Surface sediments and their accumulation before and after the typhoon were sampled and measured at intervals of 30 m along a survey line on the Gwangseungri intertidal flat. The intertidal areas were divided into high, middle, and lower tidal zones based on the mean high-wate level, mean sea level, and mean low-water level, respectively. The surface sediments of each tidal zone show rare variations in grain size and sorting of sediment texture before and after the typhoon Kompasu, whereas negative skewness values increased in the middle and lower tidal zones after the typhoon rather than before the typhoon. Surface accumulation represents deposition in the upper and middle tidal zone and erosion in the lower tidal zones after the typhoon. The accumulation decreased from the high to the lower tidal zones.

• Journal of computational fluids engineering
• /
• v.18 no.1
• /
• pp.91-97
• /
• 2013

In the present study, the effects of contaminant accumulation and surface roughness on the aerodynamic performance of wind turbine blade sections were numerically investigated by using a flow solver based on unstructured meshes. The turbulent flow over the rough surface was modeled by a modified ${\kappa}-{\omega}$ SST turbulence model. The calculations were made for the NREL S809 airfoil with varying contaminant sizes and positions at several angles of attack. It was found that as the contaminant size increases, the degradation of the airfoil performance becomes more significant, and this trend is further amplified near the stall condition. When the contaminant is located at the upper surface near the leading edge, the loss in the aerodynamic performance of the blade section becomes more critical. It was also found that the surface roughness leads to a significant reduction of lift, in addition to increased drag.