• 동력기계공학회지
• /
• 제11권1호
• /
• pp.33-38
• /
• 2007

Recent, The propeller had high performance according as high performance of small ship. So, We has the development for azimuth thrusters. This Paper has structure improvement of steering support flange in azimuth thrusters. Steering support flange is very important part. because, Steering support flange supports all weight of azimuth thrusters. We has static & dynamic analysis of Steering support flange, and we discover the very safety. So, We has optimum design for the cost reduction. The first method of optimum design, We has the thickness reduce to 30mm from 5mm. Next method of optimum design, We had added stiffener. And we has the structure & dynamic behavior analysis. We had to dynamic behavior analysis. The first, We had to modal analysis. The result of 1st-modal analysis is that original model had to 76.48hz and new model had to 200.9hz. The second, We had to harmonic analysis. The result, We gave the thrust power to steering support flange. and We had to frequency analysis to $0{\sim}500hz$. The result, Deflection ration reduce to 16.64.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.173-180
• /
• 2000

In the process of grinding a long slender type workpiece, such as ballscrew, by the external cylindrical grinding machine, the cylindricity of the workpiece depends on the distance of rests, the stiffness of supports, the diameter and material of workpiece. Conventionally the process needs to be supported by one or more rests to prevent static deflection and vibration. In this paper, the optimal position of the rests was investigated in order to minimize the cylindricity due to the static deflection, by taking compliance of the workpiece and structure into account. In order to obtain the optimal position of rests, a new modeling that is considering the spring effect of all support elements was established. Since it is so complicated to obtain the optimal position analytically for various conditions due to discontinuity, a genetic algorithm u as utilized.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1989년도 가을 학술발표회 논문집
• /
• pp.43-47
• /
• 1989

In recent years, it has been found that one of the most significant factors in the reduction of the life of concrete pavements is the presence of voids beneath the slab. In the design of pavement, it is assumed that there is a full support through the length of the pavement. When a void develops, this assumption is no longer vaild. With increasing void size, traffic loads have a very a significant increase in stress. Thus, the combination of existing voids and increasing traffic loads results in significant pavement life reduction. Basea on the results of an experimental deflection using Dynaflect device and a theoretical one on the pavement model, this study presents a rational evaluation technique for detecting voids beneath the plain reinforced concrete pavement.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.251-256
• /
• 2015

In this paper, an systematic approach is presented, in which the bridge-type traffic sign structure is body out by CSDDA PrePost Processor. There is dead load and wind load that is working on the structure which will make force and moment. Analyzied the stress distribution of the standard form and by changing the shape, compared the safety in terms of deflection and stress (with the standard form) to know the effect of each component in the bridge-type traffic sign structure. The safety of deflection and stress is evaluated by maximum distance/100) and ASIC code respectively. The standard form of bridge-type traffic sign structure is established by two pairs of pillar and two pairs of floor beam. Replaced the links which is consist of flange and screws as the torsion spring and nm our analysis program. By adjusting variable of rigidity modulus of torsion spring, moment between column and beam is controled depending on value of rigidity modulus.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권2호
• /
• pp.43-48
• /
• 2021

프리캐스트 콘크리트는 일반적으로 건설 기간을 줄이고 시공 능력을 향상시키는 데 주로 사용되고 있다. 그러나 분할 과정에서 원래 구조 시스템과 다른 경계 조건과 구조적 거동을 적용하여 구조적 문제가 발생할 수도 있다. 이 연구에서는 시공 후 휨모멘트 및 크리프 증가로 인해 처짐과 균열이 발생한 프리캐스트 콘크리트 슬래브를 대상으로 검토하였으며, 이는 프리캐스트 콘크리트 슬래브의 지지 조건 및 구조거동에 대한 잘못된 적용에서 비롯된 것임을 알 수 있었다. 프리캐스트 콘크리트 슬래브 하부에 2 개의 지지대를 삽입하여 휨모멘트를 줄이고 보강 작업시 구조적 안전성을 확보하기 위해 잭킹력에 따른 캠버를 추정해야 한다. 따라서 기존 구조물의 처짐 및 균열을 확인하기 위해 역 해석을 통해 프리캐스트 콘크리트 슬래브의 다양한 지지 조건과 휨강성을 고려하였으며, 프리캐스트 콘크리트 슬래브의 잭킹력에 따라 캠버를 추정하고 안전한 구조물을 만드는 보강방법을 제안하였다.

• 한국강구조학회 논문집
• /
• 제24권5호
• /
• pp.595-603
• /
• 2012

본 연구에서는 재하시험에 의하여 얻어지는 측정데이터를 적극적으로 활용하고 다양한 방법을 통하여 내하력을 평가하기 위하여 탄성지점을 적용하였다. 스프링력에 의한 구조해석의 적정성을 확인하고 실험결과의 신뢰도를 향상시키기 위하여 내민보로 제작한 탄성빔을 대상으로 처짐시험을 실시하였으며 이를 토대로 공용중인 교량의 내하력 평가 방법의 개선을 위하여 실제 공용중인 교량에 대한 정밀안전진단을 통한 검증을 실시하였다. 휨시험 결과 기존방법에 의하여 계산된 처짐보다 탄성지점을 적용하여 구한 처짐이 실측한 처짐과 근접한 것으로 나타났다. 준공 직후 초기점검 대상인 3경간 연속 강박스형교에 대한 내하력을 평가한 결과 탄성지점에 의한 내하력이 기존의 방법에 의한 내하력보다 최대 9.7% 작게 평가되었다. 본 연구는 기존 방법에 따라 교량의 내하력을 평가할 경우 응력보정계수의 적용과 같이 지침에 명확하게 제시되지 않은 부분으로 인하여 공학자에 따라 내하력이 상이하게 평가되는 경우가 빈번하므로 이에 대한 연구가 더욱 활발해 져야 한다는 취지에서 수행하였다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.35-40
• /
• 2016

OBJECTIVES : The objective of this study is to analyze the nonlinear behavior of block pavements using multi-load level falling weight deflectometer (FWD) deflections. METHODS : Recently, block pavements are employed not only in sidewalks, but also in roadways. For the application of block pavements in roadways, the structural capacities of subbase and subgrade are important factors that support the carry traffic load. Multi-load level FWD testing was conducted on block pavements to analyze their nonlinear behavior. The deflection ratio due to the increase in load was analyzed to estimate the nonlinearity of block pavements. Finite element method with nonlinear soil model was applied to simulate the actual nonlinear behavior of the block pavement under different levels of load. RESULTS : The results of the FWD testing show that the center deflections in block pavements are approximately ten times greater than that in asphalt pavements. The deflection ratios of the block pavement due to the increase in the load range from 1.2 to 1.5, indicating that the deflection increased by 20~50%. The material coefficients of the nonlinear soil model were determined by comparing the measured deflections with the predicted deflections using the finite element method. CONCLUSIONS : In this study, the nonlinear behavior of block pavements was reviewed using multi-load level FWD testing. The deflection ratio proposed in this study can estimate the nonlinearity of block pavements. The use of nonlinear soil model in subbase and subgrade increases the accuracy of predicting deflections in finite element method.

• Smart Structures and Systems
• /
• 제22권6호
• /
• pp.689-697
• /
• 2018

This paper presents a model of the elastic curve for rectangular beams with straight haunches under uniformly distributed load and moments in the ends considering the bending and shear deformations (Timoshenko Theory) to obtain the deflections and rotations on the beam, which is the main part of this research. The traditional model of the elastic curve for rectangular beams under uniformly distributed load considers only the bending deformations (Euler-Bernoulli Theory). Also, a comparison is made between the proposed and traditional model of simply supported beams with respect to the rotations in two supports and the maximum deflection of the beam. Also, another comparison is made for beams fixed at both ends with respect to the moments and reactions in the support A, and the maximum deflection of the beam. Results show that the proposed model is greater for simply supported beams in the maximum deflection and the traditional model is greater for beams fixed at both ends in the maximum deflection. Then, the proposed model is more appropriate and safe with respect the traditional model for structural analysis, because the shear forces and bending moments are present in any type of structure and the bending and shear deformations appear.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.46-52
• /
• 2001

One of the important technical issues is how to decrease thermal expansion of ballscrew in proportion to the increase of machining speed. when measuring force of stretch of ballscrew, since not only actual expansion and the value of bending have to be considered, it's impossible to definite the exact value of expansion. In addition, support bearings of ballscrew gain considerable force in axial direction. It also generates thermal expansion on the ballscrew, and deteriorates the bearings. In conclusion, it's impossible to give the pretension enough to absorb the all elongation due to thermal expansion generated during machine running. If gave, bed, column and saddle are all bent to change machine accuracy, and the support bearings of ballscrew are damaged. The purpose of this paper is to study the pretension of support bearing of ballscrew in machine tool.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.341-348
• /
• 1998

A method of calculating the natural frequency corresponding to the first mode of vibration of beams and tower structures, with irregular cross sections and with arbitrary boundary conditions was developed and reported by Kim, D. H. in 1974. In this paper, the result of application of this method to the subject problem is presented. The structure considered for this report is two span continuous special orthotropic plates with elastic intermediate support. The use of elastic support as one of the passive control means is common. Any method may be used to obtain the deflection influence surfaces needed for this vibration analysis. Finite difference method is used for this purposa in this paper. The influence of the modulus of the foundation, and $D_{ij}$ stiffnesses on the natural frequency is thoroughly studied.