• KIEAE Journal
• /
• 제10권5호
• /
• pp.171-179
• /
• 2010

Korea owns vast amount of apartment houses no less than those of world prominent countries, but did not pay enough efforts to maintain existing apartment houses and develop policies to reuse them due to growth driven policy of housing supply like construction of new houses. Korea constructed tremendous amount of houses in short period through government led forced house supplying policy, and resulted in excess houses such that present house supply rate happened to be reaching 110%. However, recently there are growing demand of change in housing policy due to social environmental changes like low birth rate and aging of society etc and nationals' demand for improvement of residential quality. When such social changes are demanded and 80% of apartment houses in Korea are less than 20 years old, renovations and remodeling of apartment houses are anticipated to emerge as important matter. In particular, the apartment houses in Seoul and the 1st generation new cities like Bundang and Ilsan etc have passed considerable period of time after construction and require safety measure, it is quite impending to loan programs for the maintenance of existing apartment houses. The objective of this study is to compare and analyze the system of loan programs about apartment houses of Japan, and then to propose to accelerate loan programs about maintenance for apartment houses in korea.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.48-52
• /
• 1976

A study was carried out to investigate the sanitary condition of 107 wells in Jungil Ri, Kyunggi province and Daeso Ri, Choongbuck province, from July 1, to August 30, 1975. In this study, coliform groups were examined by the membrane filter method as well as general sanitary condition, pH value, ammonia nitrogen, hardness and water temperature. The following results were obtained: 1. Average value of general sanitary condition in the wells were 15$\circ$C in temperature, pH 6.4, hardness 124ppm and Cl ion 34ppm. 2. Coliform group was positive at all out of 30 open wells and 33 out of 45 pumped wells, while only 7 out of 32 tap water in the simple typed water supply system showed the evidence of coliform groups. 3. The positive rate of ammonia nitrogen revealed 13% out of 107 wells and that of nitrite nitrogen was 36.4% and 6 wells rate of 5.6% were ammonia nitrogen and nitrite nitrogen positive at same time. 4. Colflorin group positive of 32 tap water in the simple typed water supply system 3(27%) out of 11 samples with no residual chlorine, 3(17%) out of 17 with 0.1 to 0.5ppm, 1 out of 3 with 0.6 to 1.0 ppm and none out of 1 with 1.1 to 1.5 ppm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2138-2139
• /
• 2005

We demonstrate a simple CO2 laser by controlling firing angle of a TRIAC switch in ac power line. The power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply does not need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. In order to control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of TRIAC gate is varied from 45 to 135. A ZCS(Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control the gate signal of the TRIAC precisely. The maximum laser output of 40W is obtained at a total pressure of 18Torr, a pulse repetition rate of 60Hz, and a TRAIC gate firing angle of 90.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.7-14
• /
• 2008

The temperature distribution in a surface of diesel particulate filter(DPF) was measured using an infrared temperature camera. In order to regenerate the DPF, five partitioned electric heaters were used for heating the ceramic filter. The five partitioned heaters were switched on/off with some time interval one the other. The surface temperature distribution in the ceramic filter and electric heaters were measured with varying both the electrical power supply to the heaters and the mass flow rate of the air supply from a blower. The higher mass flow rate in the DPF system enhanced the uniformity in the surface temperature distribution of the ceramic filter due to effective convection heat transfer. The flow in the monolith ceramic structure of the DPF move mainly in the axial direction, which could be identified from the surface temperature of the ceramic filter.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.63-73
• /
• 2019

This study suggests a method for calculating the benefits of water pipe renewal based on an estimate of the water supply suspension risk. The proposed method based on five benefit items is more direct and specific than other benefit estimation methods. In addition, a methodology evaluating the economics of pipe renewal based on pipe failure rate is proposed for estimating the optimal renewal point from an economic perspective. By estimating the optimal renewal period based on a yearly benefit cost ratio per pipe in a case study area, it was possible to draft an optimal renewal plan for the subject region from an economic perspective. Compared with other methodologies, a reasonable optimal renewal period was derived from an economic point of view. The result of this study may be used to develop future water pipe renewal plans. Moreover, the proposed methodologies and results derived from this study can be applied to asset management plans.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.152-160
• /
• 2019

In this study, we propose a piping material supply management method using CAD system. The piping materials installed in super large offshore plants have very complicated connection conditions. Therefore, it is very difficult to determine the order of receipt of a large number of installation materials. Therefore, we have developed a system that can automatically check the preparation rate of installation materials prior to the installation process. We have developed an algorithm to obtain connection information among installation items from PDMS system. We have developed an algorithm that can determine the order of installation materials to be installed using the connection information. The order of the installation material is determined by taking into account the constraint conditions for the complete installation of the piping material. We confirm the effectiveness of the developed algorithms in the operating system. This system is also used to manage installation schedules and plan the installation manpower.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.123-128
• /
• 1994

A high speed spindle system for machine tools can be used to reduce the machining time, to improve the machining accuracy, to perform the machining of light metals and hard materials, and to unite the cutting and grinding processes. In this study, a high speed spindle system is developed by applying the oil-air lubrication method, angular contact ball bearings, injection nozzles with dual orifices, cooling jacket and so on. And an air cooling experiment for evaluating the performance of the spindle system is carried out. Especially, in ofder to establish the air cooling conditions related to the development of a high speed spindle system, the effects of cooling air pressure, oil supply rate, air supply rate and rotational spindle speed are studied and discussed on the bearing temperature rise and frictional torque. Also the effects of cooling air pressure, rotational spindle speed and spindle system structure is investigated on the bearing temperature distribution. The experiment on the test model reveals the usefulness of the air cooling method.

• 한국환경과학회지
• /
• 제33권6호
• /
• pp.355-365
• /
• 2024

This study was conducted to investigate the effects of CO₂ supplement on growth and quality in greenhouse lettuce cultivation. When CO₂ was supplied at 1,500 ppm in lettuce cultivation, overall growth parameters such as number of leaves, leaf area, plant length, fresh weight, and dry weight were superior compared to those of the control group. While there was no significant difference in relative growth rate due to CO₂ supplement, an increase in leaf area index was observed with CO₂ usage. Furthermore, although there was no significant difference in the content of water-soluble vitamins such as Vitamin C, B1, B2, B5, and B6 due to CO₂ supplement, the Vitamin B3 content in the CO₂ treatment group was 0.5 mg/kg higher than in the control group. Therefore, the use of CO₂ in lettuce cultivation resulted in increased yield and promoted growth, enabling early harvesting.

• 대한교통학회지
• /
• 제17권2호
• /
• pp.41-53
• /
• 1999

공동주택 입주자들의 자동차 보유율의 급증으로 인한 공동주택 단지에서의 주차란에 대하여 정부에서는 그간 주차장 공급강화 정책으로 일관하였다. 하지만 주차장 공급강화는 기존 공동주택에서의 주차란 완화보다는 신규 공동주택 주차장 공급에 치중되어 있으며, 일률적 공급규정은 다양한 개발여건에서의 주차 수요에 대처하기에는 한계가 있고, 공동주택 단지의 녹지 면적 감소를 초래하고 있다. 또한 차량을 보유치 않은 입주자와 차량을 2대 이상을 보유한 입주자들과의 주차장 사용 형평상에 문제가 제기되고 있으며 지하 주차장 건설에 따른 주택원가 상승의 가장 큰 요인으로 작용하여 저소득층의 주택구매에 큰 걸림돌이 되고 있다. 본 연구는 국내·외 공동주택 단지에서의 다양한 주차장 공급 및 수요관리방안 분석을 통하여 다가오는 21세기의 국내 공동주택 주차장 정책 방향을 제시에 목적이 있다. 연구결과 전국의 공동주택에서는 도시규모, 주택평형, 단지규모, 준공년도 변화에 차이 없이 다양한 주차공급방식 도입, 주차전용제 실시, 1가구 2차량 주차 이용료부과, 단지내 주차장 증 가 및 단지주변 민영·공영주차장 활성화 외부차량 불법주차단속 강화를 통하여 현재의 공동주택 주차란에 대처하기를 원하고 있다. 특히 주차란이 매우 심각한 중형 및 소형 공동주택과 중소도시 소재 공동주택에서는 대도시 소재 공동주택 및 대형 공동주택보다 지자체에 의한 다양한 주차장 공급방식 적용과 철저한 불법주차단속을 통하여 현재의 주차란에 대처하기를 적극적으로 원하고 있어 주택규모 및 도시규모 변화에 따른 차별적 공동주택 주차장 공급 및 관리방안시행이 요망된다.

• 방송공학회논문지
• /
• 제14권6호
• /
• pp.783-795
• /
• 2009

본 연구는 디지털기술과 광대역네트워크기술의 발달에 따라 DMB, IPTV 등 신규매체가 등장함에도 불구하고 다채널방송들은 거의 동일한 내용의 콘텐츠를 제공하는데 대한 문제인식을 토대로, 플랫폼 차별화를 위해 필요한 디지털방송 콘텐츠의 수요량 및 공급량을 분석하였다. 콘텐츠 수요량은 정부의 정책적 결정에 따라 예상되는 각 매체의 채널수를 기반으로 최대, 보통, 최소의 3개 시나리오를 토대로 분석하였고, 콘텐츠 공급량은 각 매체 및 주요 방송채널사용사업자의 본방송 및 재방송비율, 그리고 지상파 방송 및 주요PP 등의 방송콘텐츠 제작 능력을 제작시설 가동률이 100%, 75%, 50%의 3가지 시나리오에 따라 분석하였다. 분석결과 최대 시나리오의 경우 연간 453,484시간의 신규 콘텐츠가 요구되며, 전체 제작시설 가동률이 100%로 가정하더라도 72,852시간의 콘텐츠만 제작 가능함으로써, 방송 콘텐츠의 수요량과 공급량의 불균형이 극심함을 알 수 있었다. 이러한 결과는 플랫폼과 네트워크 산업의 확장에 주력해온 정부 정책의 결과로 해석되며, 콘텐츠 산업을 활성화할 수 있는 정책마련이 필요하다는 것을 의미한다.