• KIEAE Journal
• /
• v.10 no.5
• /
• pp.171-179
• /
• 2010

Korea owns vast amount of apartment houses no less than those of world prominent countries, but did not pay enough efforts to maintain existing apartment houses and develop policies to reuse them due to growth driven policy of housing supply like construction of new houses. Korea constructed tremendous amount of houses in short period through government led forced house supplying policy, and resulted in excess houses such that present house supply rate happened to be reaching 110%. However, recently there are growing demand of change in housing policy due to social environmental changes like low birth rate and aging of society etc and nationals' demand for improvement of residential quality. When such social changes are demanded and 80% of apartment houses in Korea are less than 20 years old, renovations and remodeling of apartment houses are anticipated to emerge as important matter. In particular, the apartment houses in Seoul and the 1st generation new cities like Bundang and Ilsan etc have passed considerable period of time after construction and require safety measure, it is quite impending to loan programs for the maintenance of existing apartment houses. The objective of this study is to compare and analyze the system of loan programs about apartment houses of Japan, and then to propose to accelerate loan programs about maintenance for apartment houses in korea.

• Journal of Environmental Health Sciences
• /
• v.3 no.1
• /
• pp.48-52
• /
• 1976

A study was carried out to investigate the sanitary condition of 107 wells in Jungil Ri, Kyunggi province and Daeso Ri, Choongbuck province, from July 1, to August 30, 1975. In this study, coliform groups were examined by the membrane filter method as well as general sanitary condition, pH value, ammonia nitrogen, hardness and water temperature. The following results were obtained: 1. Average value of general sanitary condition in the wells were 15$\circ$C in temperature, pH 6.4, hardness 124ppm and Cl ion 34ppm. 2. Coliform group was positive at all out of 30 open wells and 33 out of 45 pumped wells, while only 7 out of 32 tap water in the simple typed water supply system showed the evidence of coliform groups. 3. The positive rate of ammonia nitrogen revealed 13% out of 107 wells and that of nitrite nitrogen was 36.4% and 6 wells rate of 5.6% were ammonia nitrogen and nitrite nitrogen positive at same time. 4. Colflorin group positive of 32 tap water in the simple typed water supply system 3(27%) out of 11 samples with no residual chlorine, 3(17%) out of 17 with 0.1 to 0.5ppm, 1 out of 3 with 0.6 to 1.0 ppm and none out of 1 with 1.1 to 1.5 ppm.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2138-2139
• /
• 2005

We demonstrate a simple CO2 laser by controlling firing angle of a TRIAC switch in ac power line. The power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply does not need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. In order to control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of TRIAC gate is varied from 45 to 135. A ZCS(Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control the gate signal of the TRIAC precisely. The maximum laser output of 40W is obtained at a total pressure of 18Torr, a pulse repetition rate of 60Hz, and a TRAIC gate firing angle of 90.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.7-14
• /
• 2008

The temperature distribution in a surface of diesel particulate filter(DPF) was measured using an infrared temperature camera. In order to regenerate the DPF, five partitioned electric heaters were used for heating the ceramic filter. The five partitioned heaters were switched on/off with some time interval one the other. The surface temperature distribution in the ceramic filter and electric heaters were measured with varying both the electrical power supply to the heaters and the mass flow rate of the air supply from a blower. The higher mass flow rate in the DPF system enhanced the uniformity in the surface temperature distribution of the ceramic filter due to effective convection heat transfer. The flow in the monolith ceramic structure of the DPF move mainly in the axial direction, which could be identified from the surface temperature of the ceramic filter.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.63-73
• /
• 2019

This study suggests a method for calculating the benefits of water pipe renewal based on an estimate of the water supply suspension risk. The proposed method based on five benefit items is more direct and specific than other benefit estimation methods. In addition, a methodology evaluating the economics of pipe renewal based on pipe failure rate is proposed for estimating the optimal renewal point from an economic perspective. By estimating the optimal renewal period based on a yearly benefit cost ratio per pipe in a case study area, it was possible to draft an optimal renewal plan for the subject region from an economic perspective. Compared with other methodologies, a reasonable optimal renewal period was derived from an economic point of view. The result of this study may be used to develop future water pipe renewal plans. Moreover, the proposed methodologies and results derived from this study can be applied to asset management plans.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.2
• /
• pp.152-160
• /
• 2019

In this study, we propose a piping material supply management method using CAD system. The piping materials installed in super large offshore plants have very complicated connection conditions. Therefore, it is very difficult to determine the order of receipt of a large number of installation materials. Therefore, we have developed a system that can automatically check the preparation rate of installation materials prior to the installation process. We have developed an algorithm to obtain connection information among installation items from PDMS system. We have developed an algorithm that can determine the order of installation materials to be installed using the connection information. The order of the installation material is determined by taking into account the constraint conditions for the complete installation of the piping material. We confirm the effectiveness of the developed algorithms in the operating system. This system is also used to manage installation schedules and plan the installation manpower.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.123-128
• /
• 1994

A high speed spindle system for machine tools can be used to reduce the machining time, to improve the machining accuracy, to perform the machining of light metals and hard materials, and to unite the cutting and grinding processes. In this study, a high speed spindle system is developed by applying the oil-air lubrication method, angular contact ball bearings, injection nozzles with dual orifices, cooling jacket and so on. And an air cooling experiment for evaluating the performance of the spindle system is carried out. Especially, in ofder to establish the air cooling conditions related to the development of a high speed spindle system, the effects of cooling air pressure, oil supply rate, air supply rate and rotational spindle speed are studied and discussed on the bearing temperature rise and frictional torque. Also the effects of cooling air pressure, rotational spindle speed and spindle system structure is investigated on the bearing temperature distribution. The experiment on the test model reveals the usefulness of the air cooling method.

• Journal of Environmental Science International
• /
• v.33 no.6
• /
• pp.355-365
• /
• 2024

This study was conducted to investigate the effects of CO₂ supplement on growth and quality in greenhouse lettuce cultivation. When CO₂ was supplied at 1,500 ppm in lettuce cultivation, overall growth parameters such as number of leaves, leaf area, plant length, fresh weight, and dry weight were superior compared to those of the control group. While there was no significant difference in relative growth rate due to CO₂ supplement, an increase in leaf area index was observed with CO₂ usage. Furthermore, although there was no significant difference in the content of water-soluble vitamins such as Vitamin C, B1, B2, B5, and B6 due to CO₂ supplement, the Vitamin B3 content in the CO₂ treatment group was 0.5 mg/kg higher than in the control group. Therefore, the use of CO₂ in lettuce cultivation resulted in increased yield and promoted growth, enabling early harvesting.

• Journal of Korean Society on Water Environment
• /
• v.26 no.5
• /
• pp.740-746
• /
• 2010

Rainwater has been used in many countries as a way of minimizing water availability problems. Rainwater harvesting system (RHS) has been successfully implemented as alternative water supply sources even in Korea. Although RHS is an effective alternative to water supply, its efficiency is often heavily influenced by temporal distribution of rainfall. Since natural precipitation is a random process and has probabilistic characteristics, it will be more appropriate to describe these probabilistic features of rainfall and its relationship with design storage capacity as well as supply deficit of RHS. This study presents the methodology to establish the relationships between storage capacities and deficit rates using probability distributions. In this study, the real three-story building was considered and nine scenaries were developed because the daily water usage pattern of the study one was not identified. GEV, Gumbel and the generalized logistic distribution ware selected according to the results of Kolmogorov-Smirnov test and Chi-Squared test. As a result, a set of curves describing the relationships under different exceedance probabilities were generated as references to RHS storage design. In case of the study building, the deficit rate becomes larger as return period increases and will not increase any more if the storage capacity becomes the appropriate quantity. The uncertainties between design storage and the deficit can be more understood through this study on the probabilistic relationships between storage capacities and deficit rates.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.2
• /
• pp.176-191
• /
• 2011

The regional supply and demand for labor are different among the regions because of the regional disparity of the human capital and the industrial structure. Honam, Kangwon and Jeju province in particular has a more rapid change of the job search(labor supply), the job offer(labor supply) and the employed person according to the business fluctuations. The employed person of the capital region, Seoul in particular increased: though diminished the job offer and the job search grew. But the employed person of Youngnam and Honam province in particular decreased: though grew the job offer and the job search diminished. The employment rate and employment opportunity of all population group except the high-educated person are higher in the capital region than the province. The province has a low employment rate even in the managerial work and the professional work that the employment opportunity is high because of the lack of human capital.